Watch this video to see how a sound suppressor (aka “silencer”, “moderator”, or “can”) is constructed, start to finish. It’s more complicated than you might expect — there are quite a few stages in the process. The video below shows the fabrication of a SilencerCo Octane 45 suppressor:
SilencerCo writes: “What, exactly, goes into making a silencer? It may be more than you’d expect. From cutting metal to chemical baths, to extensive quality control every step of the way, our streamlined process is more than just a few steps. Watch our newest video, HOW IT’S MADE: Octane 45, to catch a glimpse behind SilencerCo’s doors.”
How Loud Are Unsuppressed Rifles?
Firearms Are Loud — 140 dB to 175 dB. ASHA explains: “Almost all firearms create noise that is over the 140-dB level. Exposure to noise greater than 140 dB can permanently damage hearing. A small .22-caliber rifle can produce noise around 140 dB, while big-bore rifles and pistols can produce sound over 175 dB. Firing guns in a place where sounds can reverberate, or bounce off walls and other structures, can make noises louder and increase the risk of hearing loss. Also, adding muzzle brakes or other modifications can make the firearm louder. People who do not wear hearing protection while shooting can suffer a severe hearing loss with as little as one shot[.]” Source: ASHA, Recreational Firearm Noise Exposure.
How Much Does a Good Suppressor Really Reduce Firearm Sound Levels?
That depends on the rifle, the cartridge, and the effectiveness of the suppressor. American Hunter explains: “Suppressors retard the speed of propellant gases from the cartridge that rapidly expand and rush out of the barrel. It’s these gases that produce the loud boom that’s heard for miles. A suppressor’s series of internal baffles slows these gases so they are not all released at once, thereby muffling the sound.” Many good commercial suppressors can achieve 30-35 dB sound suppression. However, Zak Smith of Thunder Beast Arms says: “There are a bunch of manufacturers who publish values that are not reproducible, or use an ad-hoc test instead of a mil-spec test. In many cases we’ve tested the exact same suppressors they’ve advertised with 30-40 dB reductions and found they are actually in the high 20s instead.”
Again, for this reason, we recommend that hunters use ear protection, such as electronic muffs, even when shooting suppressed.
Share the post "Cantastic Video — How a Suppressor is Constructed"
There is a new Gundies Award program for gun-centric social media content creators. Modeled after the Oscars or Emmys, the Gundies Awards focus on the world of guns, shooting, and hunting. Nominees include those who write about guns on Facebook, who post photos on Instagram, and who make videos for YouTube. The annual community-voted Gundies awards spotlight notable firearms-centric content creators. You can register on Gundies.com and then vote for your favorite “influencers” and video-makers. The last day to vote is 12/31/2020.
Mixed Bag of Nominees — Some Good, Some Laughable
To be honest, some of the female “influencers” are just narcissistic social media queens who trade on their looks. They get dolled up in revealing outfits and lots of make-up for posed shots with guns. And on the male side there are plenty of tattooed tactical poseurs with almost no technical knowledge. But there ARE some solid nominees, especially in the Best Shooter and Best Gun Reviewer categories. We showcase videos from five Gundies candidates below. NOTE: These are NOT the category winners — the actual winners will be decided by popular voting which closes December 31, 2020 (better vote soon).
There are 15 Gundies Categories:
YouTuber of the Year
Best Gun Reviewer
Best Shooter
Best Cross-over Creator
Breakout Creator of the Year
Influencer of the Year
Influencer Turned Entrepreneur
Best Outdoorsman
Most Innovative Content of the Year
Most Influential Female of the Year
Most Influential Male of the Year
Most Creative Content of the Year
Most Entertaining Content Creator
Most Likely to Survive an Apocalypse
Best Gun Store/Shooting Range
1. Gundies Nominee — Mrgunsngear
YouTuber of the Year Category
The Mrrgunsngear Channel has nearly 550,000 subscribers and we know why. This YouTube channel offers a combination of gun-centric content and complimentary reviews of outdoor gear (such as generators, lamps, backpacks, body armor). The host is articulate and a pretty good shooter. He also comments on recent gun law developments, such as the ATF Pistol Brace controversy. Here are four videos that showcase the variety of content from this capable Gundies nominee:
2. Gundies Nominee — Dustin Ellermann
Best Shooter Category
Our friend Dustin Ellermann is a past Top Shot TV Show Champion. He is a very capable shooter who also runs a Christian-focused Camp for kids. Dustin produces multiple videos every month for his Top Shot Dustin YouTube Channel. Here we feature Dustin’s review of the the Volquartsen Summit rimfire rifle. This is a straight-pull bolt rifle available in .22 LR, .17 Mach2 and .17 WSM. Dustin reports: “[The Summit] is extremely accurate as well as a perfect suppressor host.”
3. Gundies Nominee — Caleb Savant (Brownells)
Breakout Creator of the Year Category
While many Gundies nominees have very little technical knowledge of firearms, Brownells Firearm Support Technician Caleb Savant is the exception. Caleb’s Brownells videos cover a variety of technical topics — including sight installation, cartridge terminology, dry-firing, gun maintenance, tool selection, and much more. Honestly, you can really learn a lot from Caleb’s videos for Brownells. In this video Caleb Savant shows how to install a pre-fit barrel on a Savage bolt action. Pre-fits come with the chambers pre-cut, and they have a simple barrel nut that makes installation extremely easy.
Pew Pew Tactical (PPT) has a good website with useful content, such as a very thorough Review of Nine Long-Range Scopes. Along with its Blog articles, PPT offers dozens of videos on the PPT YouTube Channel. You’ll find many reviews of ARs, military-style rifles, and pistols. But in addition, PPT offers many good product reviews that are honest about product pros AND cons — that’s pretty rare these days. Here is one of PPT’s most informative videos, a 7-minute guide to cleaning and lubricating AR-platform rifles. This shows important details for the bolt and bolt carrier group.
5. Gundies Nominee — MrBigKid
Best Cross-Over Category
MrBigKid is not a typical gun-centric YouTube creator. That’s because his videos focus on two main topics — GUNS and BBQ. Since both those topics — shooting and eating — appeal to a broad audience, MrBigKid’s YouTube channel is growing quickly. When you get tired of the “bang and clang” of guns shooting steel, you can switch to pro-level barbecue methodology shared by a talented cook. Here are TWO of MrBigKid’s recent videos, one featuring a .50 BMG rifle and the other serving up delicious smoked Beef Ribs. Be honest… which video did you click first?
Share the post "Gundies Awards — Vote for Your Favorite Gun Content Creators"
Why is factory ammunition so hard to find? That’s the question on many gun owners’ minds. There are some crazy rumors — that production has been slowed on purpose — or that there is a secret warehouse somewhere, full of ammo. In fact, those rumors are nonsense — the major ammo production facilities of Vista Outdoor are running around the clock to meet demand.
That message was recently delivered in a video featuring Jason Vanderbrink, President of Vista Outdoor’s ammunition manufacturing division, which includes brands Federal, CCI, Speer, and Remington.
Millions of new gun owners have created an unprecedented demand for ammo in 2020.
Huge Demand from Millions of New Gun Owners
Vanserbrink points out some basic economics: “Seven million new shooters since March, times 2 boxes (a conservative estimate) is 700 MILLION new rounds of ammunition [that] our three factories have to produce. That is impossible to do in nine months.”
In this video, Vanderbrink asks for patience and seeks to quash rumors. While conceding that the pandemic has created challenges, Vanderbrink declares that the ammo plants are running at full capacity:
“We know, ammo seems hard to come by right now. But rest assured, we are building and shipping more and more every day[.] We are making ammunition every minute of every day … We are making more hunting ammo than we ever have. We are doing our damndest to meet the demand!”
Share the post "America’s Big Ammunition Plants Are Running at Full Capacity"
If you wonder how ammo is made, starting with raw metal, check out this video from Hornady. It shows how bullet jackets are formed from copper, followed by insertion of a lead core. The jacket is then closed up over the core with the bullet taking its final shape in a die (a cannelure is applied on some bullet types). Next the video shows how cartridge brass is formed, starting with small cups of brass. The last part of the video shows how cases are primed and filled with powder, and how bullets are seated into the cases, using an automated process on a giant assembly-line. CLICK Link below to watch video:
Hornady’s New 150,000-sq-ft Ammo Production Center
In 2018, Hornady opened a new, state-of-the-art factory. The 150,000-sq-ft Hornady West Facility, featured in the video below, handles ammunition production and product distribution — Hornady produces millions of rounds annually. Hornady cartridge brass and bullets will continue to be produced at Hornady’s 100,000+ square foot factory in Grand Island, Nebraska. The Grand Island factory is open for tours Monday through Thursday. Hornady Manufacturing was founded by Joyce Hornady in 1949, so 2019 marked the company’s 70th anniversary.
Share the post "Hornady Video Shows How Ammunition is Made"
Want to see new-born Pandas? No, not the furry kind — rather Stolle Panda actions produced with state-of-the-art CNC machinery. If you’ve ever wondered how precision benchrest, long-range, and tactical rifles are built, check out video from Kelbly’s. You’ll see actions finished, barrels chambered and crowned, pillars installed in stocks, barreled actions bedded, plus a host of other services performed by Kelbly’s gunsmiths and machinists.
If you’re a fan of fine machine-work, this video should be both informative and entertaining. You can see how precision gun work is done with 21st-Century technology. Tip of the hat to Ian Kelbly and crew for producing this excellent video visit to the Kelbly’s production center.
Click Volume Control to Activate Sound for Kelbly’s Video:
Share the post "Lights, Camera, Actions! — Video Tour of Kelbly’s Shop"
In these two videos from the Rekyyli Ja Riista (Recoil and Game) YouTube Channel, you can see how a modern, short-range benchrest rifle is shot. Note how the gun tracks superbly, returning right on target, shot after shot. As a result, the shooter doesn’t have to adjust the rifle position after firing (other than pushing the gun forward), so he can quickly load and fire within seconds of the previous shot. Good rests and consistent, smooth bolt actuation keep the gun from rocking.
It does take practice to perfect the right technique for shooting free recoil (or nearly free recoil — with just a pinch on the trigger guard). And, of course, you must have a very good bag/rest set-up and the stock geometry and rifle balance must be perfect. The ammo caddy also helps by placing the cartridge up high, right next to the left-aide loading port. Hats off to Forum member Boyd Allen for finding these videos. Boyd told us: “Watch carefully — Now this is how it’s done.” [Work Warning: Loud gunshot noises — Turn Down Volume before playback.]
Share the post "Short-Range Benchrest Techniques Showcased in Finland"
It’s 2020! Welcome the new year and a new decade. We know many of our readers will be spending the winter day indoors. If you need a break from the bowl games on TV, here are eight interesting and informative videos that are worth watching. The subject matter runs the gamut from benchrest gunsmithing to long-range varmint silhouette competition. There are also reviews of some of the best precision rifle options for PRS and NRL22 disciplines. Enjoy our New Year 2020 Video Fest.
Epic Reloading Hardware Test — 14 Single-Stage Presses. In this remarkable video, Gavin Gear of UltimateReloader.com reviews fourteen (14) single-stage reloading presses. This is the most comprehensive reloading press comparison test ever done by anyone, anywhere. The presses range from compact units to large-frame exotics from Europe. If you are in the market for a single-stage press in 2020 this is a MUST-watch video. Brands include Forster, Hornady, Lyman, MEC, RCBS, Redding, Turban (Prazipress).
2. Precision Riflesmith — Profile of Benchrest Smith Mike Bryant
Texas gunsmith Mike Bryant is a talented benchrest shooter and a highly respected builder of competition and hunting rifles. In this wide-ranging interview, Mike talks about benchrest competition, the key factors that contribute to rifle accuracy, and about his career as a gunsmith.
3. Erik Cortina — Mag-Feed Testing Borden Action with 6BR
Click the Speaker Icon (lower right) to HEAR AUDIO
Our friend Erik Cortina has built a new PRS/NRL rifle based on the new Borden Super Short 6 Action. This video show Erik’s first mag-feeding test with ten 6BR loaded rounds. You’ll see there is NO problem speed-feeding the short 6BR case. Erik tells us: “I removed the firing pin from bolt for safety. The magazine has not been modified in any way. I would say there is no need to do anything to it, she’s ready to run!” Impressive indeed.
4. Shooting USA — Texas Varmint Benchrest Match
This episode of Shooting USA TV features long-range varmint silhouette competition in Texas. This discipline combine the pure accuracy of benchrest competition with the fun of knocking down critter targets. These are smaller than standard silhouettes, so it’s quite a challenge to hit them at 300 yards and beyond.
In this episode, host John Scoutten competes with his 6.5 Creedmoor PRS rifle. Most shooters use benchrest-grade rifles with premium front rests. NOTE: This video shows some top-flight benchrest rifles, and also covers the origins of benchrest varmint silhouette in Pennsylvania. There are even some AccurateShooter Forum members on screen.
5. Vickers Tactical — .308 Win Bolt Gun Vs. .308 Win Gas Gun
This interesting video from Vickers tactical compares and contrasts two tactical style rifles both chambered for the .308 Winchester. The test team compares functionality, accuracy, ergonomics, and versatility. Each platform has its advantages, as the video reveals.
6. Outdoor Life — The Best New Affordable Precision Rifles
This video showcases three modern tactical-style rifles suitable for the PRS Production (Factory) Class which is limited to $2000 for rifle alone, not counting optics (Rule 2.3.1). Outdoor Life Shooting Editor John Snow puts three capable rifles through their paces: Patriot Valley Arms John Hancock, BadRock Precision SouthFork, and Seekins Precision Havoc Bravo.
7. Aerial View of Deep Creek Shooting Range in Montana
The Deep Creek Range near Missoula, Montana, is one of the best 1000-yard ranges in the country. Many long-range benchrest records have been set in this scenic, tree-lined facility. Now, thanks to Forum member David Gosnell (aka “Zilla”), you can see Deep Creek from the air. David flew a camera drone over the Deep Creek Range, soaring from firing line to the target bay and back again. This video gives you a “birds-eye view” of one of America’s elite ranges.
8. Nat’l Rifle League — Intro to NRL22 Rimfire Tactical Matches
NRL22 is a great way to get into competition shooting with minimal expense. There are Five (5) classes: Open, Base, Ladies, Young Guns (8-16), and Air Rifle. Base Class is for the budget-minded shooter — the combined MSRP of Rifle and Optic may not exceed $1050.00 (so you could spend $550 on a rifle and $500 on a scope for example). That keeps the sport affordable. Open, Youth, and Ladies Classes have no price limits on Rifle and Optic. Visit NRL22.org to find an NRL22 match near you.
Share the post "2020 Gun Video Fest — Eight Great Videos for a New Decade"
Ian Klemm, 2017 F-TR USA National Champion, is one of America’s top F-Class shooters, both shooting individually and in team competition. Ian is known for his consistency, smooth gun handling, and an uncanny ability to shoot well even in the toughest wind conditions. In this Vortex Video, Ian and fellow long-range shooter Niles Richardson, reveal some of their competitive secrets, and wind-reading techniques. This video focuses primarily on F-Class competition but Ian and Niles also talk more broadly about the myriad factors that contribute to rifle accuracy. Topics include: match strategies, wind and mirage reading, barrel harmonics, bipods, and optics.
Vortex Nation Podcast Episode 57 Summary
From Vortex: Our original intent was to have just a podcast about the sport of F-Class shooting, but when you get these brainiacs (Ian Klemm and Niles Richardson) talking about their obsession… er… “Hobby” you better believe it’s going to turn into a full on long range shooting information assault to the brain. Fact of the matter is, in F-Class, the only thing that matters is long range accuracy – and when we say “Accuracy”, we’re talking about sub-MOA groups on paper at 1000 yards with .308 Wins. Every single aspect of an F-Class competitor’s game is completely dialed in for long range accuracy.
We talk about the guns, their bipods, wind, mirage, barrel harmonics and the special scopes F-Class competitors need for their rifles. Ian even goes so far as to tell us how much his rifle has moved prior to the bullet leaving his 30-inch barrel. Just a simple equation involving acceleration, terminal velocity, moment of inertia of the rifle and coefficient of friction of the bipod and rifle on the ground.
Share the post "F-TR Champion Shares Winning Secrets in Vortex Video Podcast"
Want to see a bullet hit a target in ultra-ultra-slow motion? Watch this video to witness some amazing things — such as a bullet jacket peeling back like a banana-skin (at time-mark 7:30). A while back, Werner Mehl of Kurzzeit.com produced a 10-minute video for the SHOT Show. This video has has been watched over 10.6 million times, making it one of the most popular shooting-related videos in history. Employing cameras recording at up to 1,000,000 (one million) frames per second, Mehl’s bullet flight video has been called “astounding” and “mesmerizing”. If you haven’t seen it yet, sit back and enjoy!
Watch This Video! It’s Really Something Special…
LINK: Kurzzeit.com Video System and PVM-21 Chronograph
Click the link above to learn more about Werner Mehl and his super-sophisticated camera systems that can record at 1,000,000 frames per second. On the same linked page you can learn about the advanced PVM-21 chronograph (now sold as the BMC-19) designed by Werner. Operating “all-infrared, all the time”, the PVM-21/BMC-19 is the best optical chronograph we have tested for very low light conditions, or very tricky light conditions.
Share the post "Amazing Slow-Motion Video Shows Bullet Impacts"
How well can the little 6mm Dasher perform at 1000 yards when the conditions are good, and the shooter is riding a hot streak? Well here’s a shot-by-shot record of Scott Nix’s 4.554″ ten-shot group shot at Missoula, Montana at the Northwest 1000-yard Championship a few years back. All 10 shots were centered for a 100-6X score. That’s about as good as it gets. If Scott had stopped after 5 shots, his group would have been under three inches.
Video Demonstrates Amazing 1000-Yard Accuracy
Watch the video. You can see the group form up, shot by shot. It’s pretty amazing. Scott’s first shot (at the 45-second mark of the video) was right in the X-Ring, and four of Scott’s first five shots were Xs. That’s drilling them! This video was recorded from the pits at the 1000-yard line, during record fire.
Share the post "Amazing 1K Video: 10 Shots in 4.554″ at 1000 Yards (100-6X)"
How is a modern, metal-chassis rifle built? This very cool video from Masterpiece Arms answers that question. The nicely-edited video shows the creation of a Masterpiece Arms tactical rifle from start to finish. All aspects of the manufacturing process are illustrated: 3D CAD modeling, CNC milling of the chassis, barrel threading/contouring, chamber-reaming, barrel lapping, laser engraving, and stock coating. If you love to see machines at work, you will enjoy this video…
Share the post "Building a Precision Tactical Rifle — Step by Step on Video"
As part of the NRA’s Tips & Tactics video series, Kristy Titus explains how to prepare for a hunt. Titus, co-host of the Team Elk TV show, is a certified instructor has hunted around the globe. She grew up in the outdoors, running pack mules in Oregon with her father. In this video, Kristy discusses fitness training and demonstrates field positions that can be employed during a hunt.
Kristy explains: “Hunting can lead you into some steep, rough country. It’s really important that you train both your body and your mind to handle the elements and the rigors of hunting. With no two hunting situations being the same, we must train to be adaptable and make the most of every opportunity. The most important aspect of hunting success, ultimately, is the person behind the rifle. So, if you plan on going on a mountain hunt, get out and train your body. Train with your firearm. Get off the bench and have some fun with this. Do some positional shooting or, if you want to add a stress dynamic… have someone put you under a time parameter.”
“When it comes to bolt-action rifle fit, there is no ‘one size fits all’,” says Titus. “When picking out your rifle [consider options] after the purchase to ensure you are as comfortable as possible.”
Story Tip from EdLongrange. We welcome reader submissions.
Share the post "Kristy Titus Explains How to Prepare for a Hunt"
If you wonder how ammo is made, starting with raw metal, check out this video from 
In these two videos from the 
This episode of Shooting USA TV features long-range varmint silhouette competition in Texas. This discipline combine the pure accuracy of benchrest competition with the fun of knocking down critter targets. These are smaller than standard silhouettes, so it’s quite a challenge to hit them at 300 yards and beyond.
How well can the little 6mm Dasher perform at 1000 yards when the conditions are good, and the shooter is riding a hot streak? Well here’s a shot-by-shot record of Scott Nix’s 4.554″ ten-shot group shot at Missoula, Montana at the Northwest 1000-yard Championship a few years back. All 10 shots were centered for a 100-6X score. That’s about as good as it gets. If Scott had stopped after 5 shots, his group would have been under three inches.
