When shooting at long range, two heads (and two sets of eyes) can be better than one. Teaming up with a buddy who acts as a spotter can speed up your long-range learning process. You can focus 100% on the shot, while your buddy calls the wind and spots your hits and misses.
The NSSF has created a short video that shows how shooter and spotter can work as a team. In the video, the NSSF’s Dave Miles works with Rod Ryan, owner of Storm Mountain Training Center in Elk Garden, WV. As the video shows, team-work can pay off — both during target training sessions and when you’re attempting a long shot on a hunt. Working as a two-person team divides the responsibilities, allowing the shooter to concentrate fully on breaking the perfect shot.
The spotter’s job is to watch the conditions and inform the shooter of needed wind corrections. The shooter can dial windage into his scope, or hold off if he has a suitable reticle. As Rod Ryan explains: “The most important part is for the shooter to be relaxed and… pay attention to nothing more than the shot itself.” The spotter calls the wind, gives the information to the shooter, thus allowing the shooter to concentrate on proper aim, gun handling, and trigger squeeze. Rod says: “The concept is that the spotter does all the looking, seeing and the calculations for [the shooter].”
Spotter Can Call Corrections After Missed Shots
The spotter’s ability to see misses can be as important as his role as a wind-caller. Rod explains: “If you shoot and hit, that’s great. But if you shoot and miss, since the recoil pulse of the firearm is hitting your shoulder pretty good, you’re not going to be able to see where you missed the target. The spotter [can] see exactly where you missed, so I’ll have exactly an idea of how many [inches/mils it takes] to give you a quick secondary call so you can get [back on target].”
Recommended Premium Spotting Scopes
Looking for a truly superior spotting scope? Then check out the Kowa Prominar TSN-880 Series. These big spotters feature ultra-sharp Flourite glass, with huge 88mm front objectives. In comparison tests with other premium spotting scopes the TSN-883 (angled) and TSN-884 (straight) units always finish at or near the top. Right now you can get the TSN-883 (Angled) body at Amazon for $2450.00 or EuroOptic.com for the same price.
Share the post "Train as a Team — Shooter and Spotter Working Together"
September 25, 2021 is National Hunting and Fishing Day. Working on your wind reading skills can improve your odds of a successful hunt. Image from NHFDay.org.
Thomas Haugland, a Shooters’ Forum member from Norway, is a long-range target shooter and hunter. He has created an interesting video showing how to gauge wind velocities by watching trees, grass, and other natural vegetation. The video commentary is in English, but the units of wind speed (and distance) are metric. Haugland explains: “This is not a full tutorial, but rather a short heads-up to make you draw the lines between the dots yourself”. Here are some conversions that will help when watching the video:
.5 m/s = 1.1 mph | 1 m/s = 2.2 mph | 2 m/s = 4.5 mph
3 m/s = 6.7 mph | 4 m/s = 8.9 mph | 5 m/s =11.2 mph
How to Gauge Wind Speed and Hold Off Using Reticles
This field video shows how to observe natural indicators — trees and vegetation — to estimate wind velocity. Then it shows how to calculate hold-offs using the reticle hash-marks. Thomas shoots a fast-cycling Blaser R93 rifle with Norma 6XC ammunition.
When shooting at long range, two heads (and two sets of eyes) can be better than one. Teaming up with a buddy who acts as a spotter can speed up your long-range learning process. You can focus 100% on the shot, while your buddy calls the wind and spots your hits and misses.
The NSSF has created a short video that shows how shooter and spotter can work as a team. In the video, the NSSF’s Dave Miles works with Rod Ryan, owner of Storm Mountain Training Center in Elk Garden, WV. As the video shows, team-work can pay off — both during target training sessions and when you’re attempting a long shot on a hunt. Working as a two-person team divides the responsibilities, allowing the shooter to concentrate fully on breaking the perfect shot.
The spotter’s job is to watch the conditions and inform the shooter of needed wind corrections. The shooter can dial windage into his scope, or hold off if he has a suitable reticle. As Rod Ryan explains: “The most important part is for the shooter to be relaxed and… pay attention to nothing more than the shot itself.” The spotter calls the wind, gives the information to the shooter, thus allowing the shooter to concentrate on proper aim, gun handling, and trigger squeeze. Rod says: “The concept is that the spotter does all the looking, seeing and the calculations for [the shooter].”
Spotter Can Call Corrections After Missed Shots
The spotter’s ability to see misses can be as important as his role as a wind-caller. Rod explains: “If you shoot and hit, that’s great. But if you shoot and miss, since the recoil pulse of the firearm is hitting your shoulder pretty good, you’re not going to be able to see where you missed the target. The spotter [can] see exactly where you missed, so I’ll have exactly an idea of how many [inches/mils it takes] to give you a quick secondary call so you can get [back on target].”
Recommended Premium Spotting Scopes
Looking for a truely superior spotting scope? Then check out the Kowa Prominar TSN-880 Series. These big spotters feature ultra-sharp Flourite glass, with huge 88mm front objectives. In comparison tests with other premium spotting scopes the TSN-883 (angled) and TSN-884 (straight) units always finish at or near the top. Right now you can get the TSN-883 (Angled) body at Amazon for $2450.00 or EuroOptic.com for the same price. A Special 125th Anniversary Black-Body Edition with TE-11WZ 25-60x Zoom Eyepiece runs $3150.00 at B&H Photo.
Share the post "Training Tip: Shooter and Spotter Working as a Team"
Thomas Haugland, a Shooters’ Forum member from Norway, is a long-range target shooter and hunter. He has created an interesting video showing how to gauge wind velocities by watching trees, grass, and other natural vegetation. The video commentary is in English, but the units of wind speed (and distance) are metric. Haugland explains: “This is not a full tutorial, but rather a short heads-up to make you draw the lines between the dots yourself”. Here are some conversions that will help when watching the video:
.5 m/s = 1.1 mph | 1 m/s = 2.2 mph | 2 m/s = 4.5 mph
3 m/s = 6.7 mph | 4 m/s = 8.9 mph | 5 m/s =11.2 mph
How to Gauge Wind Speed and Hold Off Using Reticles
This field video shows how to observe natural indicators — trees and vegetation — to estimate wind velocity. Then it shows how to calculate hold-offs using the reticle hash-marks. Thomas shoots a fast-cycling Blaser R93 rifle with Norma 6XC ammunition.
