As an Amazon Associate, this site earns a commission from Amazon sales.











August 13th, 2014

New Giraud Case-Trimming and Chamfering Tool

Giraud Tool has a new case trimmer/chamferer that works with a power drill (or other power source). Giraud’s patent-pending Tri Way Case Trimmer is a self-contained unit powered by your drill or motor. Using a sharp carbide blade it will trim your cases to length, deburr, and cut both inside and outside chamfers — all in one pass. That’s pretty impressive for a $90 tool that fits in the palm of your hand.

Close-up of the Tri Way cutter with clear plastic chip guard removed.
Giraud Tri Way Trimmer Case Cutter tool

Product Features
1. Fully adjustable for cartridge length (and depth of chamfer).
2. Tool includes carbide blade that cuts a 15° inside case mouth chamfer and 45° outside chamfer.
3. Case holder supported by sealed ball bearing raceway.
4. Tool includes removable, transparent plastic chip guard.
5. Tool can work in any orientation (vertical, horizontal, or any angle).

The Giraud Tri Way Trimmer is designed to be powered by a portable hand drill, drill press, or other dedicated rotating power source. The tool indexes off the shoulder of your cases, but the blade adjusts so that cartridge overall length (COAL) can be controlled with precision. Constructed out of 6061-T6 aluminum and 303 stainless steel, the Tri Way tool should last a lifetime. Note: This tool is not universal. The Tri Way is dedicated to a single cartridge and “related” cartridges with similar body dimensions. Thus you need a specific tool for each cartridge family. For example, the .308 Win tool will also trim .243 Win, .260 Rem, and 7mm-08.

Cartridge Sizes Available for Giraud Tri Way Trimmer:
.223 Remington (Also trims .17 Remington, .204 Ruger, .222 Remington, .222 Remington Magnum)
7.62 x 39mm (Russian)
.300 Blackout (Also trims .17 Rem Fireball, .221 Fireball)
.308 Winchester (Also trims .243 Winchester, .260 Remington, 7mm-08)
.30-06 Springfield (Also trims .25-06, .270 Winchester, .280 Remington)
.300 Winchester Mag (Also trims .264 Winchester Magnum, 7mm Remington Magnum)

Giraud Tri Way Trimmer Case Cutter tool

Product Tip from EdLongrange. We welcome reader submissions.
Permalink New Product, Reloading 4 Comments »
July 27th, 2013

New WFT 2 Trimmer Adapts to Multiple Cartridge Types

Little Crow Gunworks has updated its popular “World’s Finest Trimmer” (aka WFT). The new WFT 2 version is more versatile — it can now easily change from one cartridge family type to another. That makes the $69.95 product an even better value. Trimming works the same way as before — just push the cartridge case into the trimmer and cut depth is pre-set. When ordering the WFT 2, choose a trim chamber for your particular cartridge family (such as .308, 7mm-08, .243 Win). You can trim multiple cartridge types (with one trim chamber) by ordering the largest chamber in the family you plan to trim. To trim cartridges from a different family, simply order (and install) a different chamber insert.

World's finest trimmer case trimming tool chamber insert WFT 2

The WFT 2’s designers explain: “The two main improvements are the ability to trim up to 45 caliber and interchange trim chambers. The WFT 2 has a half-inch shaft and requires a half-inch chuck to drive it. The feature most customers asked for was the ability to interchange trim chambers. After many prototypes (and much testing) the solution came from our friend, Jim Lambert. Instead of press-fitting the trim chambers, as on our original WFT, the trim chambers on our WFT 2 feature a slight slip-fit-in bearing with a groove cut for an O-ring which creates a press fit.”

How to Change Trim Chambers
Changing out trim chambers is accomplished by removing the cutter and pushing out the trim chamber with the knock-out dowel that is provided with the WFT 2. To install the trim chamber, set the trim chamber on a flat surface and steadily push the housing onto the trim chamber. To set cut depth (COAL trim length) place a ‘master case’ in the trim chamber and slide the cutter up to the case mouth. The tighten the set screws.

Product Tip from EdLongrange. We welcome reader submissions
Permalink New Product, Reloading 4 Comments »