https://bulletin.accurateshooter.com/2007/07/tech-tip-poor-mans-headspace-gauge/ from AccurateShooter.com Thu, 30 Apr 2026 14:59:33 +0000 hourly 1 https://wordpress.org/?v=4.1.26 https://bulletin.accurateshooter.com/2007/07/tech-tip-poor-mans-headspace-gauge/comment-page-1/#comment-22040 Sun, 30 Oct 2011 16:26:49 +0000 http://accurateshooter.wordpress.com/2007/07/20/tech-tip-poor-mans-headspace-gauge/#comment-22040 If you seat with a sliding chamber die or a Wilson type the ends are usually with 1/2 thousands you can use the sliding sleeve or die body with a dial caliper or granite (or steel)block heighth gauge with dial indicator, tools you probably already have. A lot of us have been doing this for years and it works.

]]> https://bulletin.accurateshooter.com/2007/07/tech-tip-poor-mans-headspace-gauge/comment-page-1/#comment-263 Sun, 28 Dec 2008 23:35:59 +0000 http://accurateshooter.wordpress.com/2007/07/20/tech-tip-poor-mans-headspace-gauge/#comment-263 That’s a pretty clever idea for a “poor mans” tool. However, if you have a few extra bucks and you want a quality tool that’s easy to use, check out this Digital Headspace Gauge on the homepage of our website.
http://www.larrywillis.com

]]>