Comments on: 'Pet Loads' Needed for 7mm Cartridge Guide

By: larry levine

larry levine — Sun, 26 Oct 2008 01:25:06 +0000

here’smy 7mm wsm load data:
7mm wsm
180 gr berger vld
66.7 grains H1000
oal to ogive = 2.125″
winchester brass with full prep including necks turned to .014
fed 215m primer
2950 fps with 28″ barrel with badger brake
no pressure signs
consistently shoots 1/3 to 1/2 moa out to 400-500 yards, consistently
holds 1 moa out to 1k;
this is a good load for long range precision or tactical matches;

By: jerryscherrer

jerryscherrer — Wed, 01 Oct 2008 01:28:36 +0000

High power silhouette loads for 7mm-o8. Load for chicken pig turkey,Winchester brass,CCI BR-2 primer IMR-4064,38 grns.150grn matchking. Ram load, 162 grn Amax 40.3 IMR-4064

By: Pao Her

Pao Her — Mon, 29 Sep 2008 16:38:26 +0000

7mm WSM
180 Grn JLK
2.312″ from Base to Ogive (bullet touching lands)
67 grn H1000
1/4″ at 100 yards – 5 shot group.
2900 FPS
Win brass
Fed. 210 Match Primer
Little sign of pressure, but still safe.

By: Ken

Ken — Fri, 26 Sep 2008 22:31:37 +0000

I really like this. Now all we need is a page to contain a number of the 6.5 mm variants (e.g. 6.5×47 Lapua, 65. Grendel, etc.).

By: Hexa

Hexa — Fri, 26 Sep 2008 18:32:43 +0000

Great that we get the 7mm page finally !