Comments on: SHOT Show: Help Us Provide Feedback to Manufacturers

By: Don Fraser

Don Fraser — Wed, 14 Oct 2009 22:45:07 +0000

Savage Arms: I’m considering a new Savage 11FCNS (Accutrigger & Accustock) in .243 Win but the Savage website does not provide ‘stock dimensions’ such as length of pull (I have an injured arm) or stock detail such as checkering/no checkering, butt-plate type, etc.?????
The retailer, with one in inventory, is about 150 miles from here so a lot of faith & research is required up front.

By: Gabe Schmudlach

Gabe Schmudlach — Sat, 17 Jan 2009 17:06:00 +0000

I would like to hear from the cartridge component manufacturers when they plan to cut their prices back.

When we took the price increases over the last two years, we were told that this all had to do with the increased cost of raw materials. Well, the raw material costs have plummeted over the last few months yet I’m hearing talk of yet another round of price hikes.

What gives?

By: Gerald Malerba

Gerald Malerba — Sat, 17 Jan 2009 04:10:47 +0000

With all of the new wildcat cartridges based on the BR case I would like Lapua to step up production of the 6br case. recently we have shortages.

By: STEVEN L. ZAGRODNIK

STEVEN L. ZAGRODNIK — Fri, 16 Jan 2009 01:19:12 +0000

I would like to see Burris offer their excellent posi-align signature rings (30mm and 1″) for pictanny rails.
I would like to see savage offer their 12LRPV in 223 1-7 twist,w/their better trigger and very heavy barrel in a repeater that would accept ar15 magazines.Also would like it in the new accustock or hs precision stock with anschutz rail, adjustable comb and LOP.Also 20moa scope rail in weaver configuration.
I would like swarovski to offer their 8×30 laser guide with arc compensation

By: Brad Sauve

Brad Sauve — Thu, 15 Jan 2009 02:26:10 +0000

When is Schmidt & Bender releasing their 12-50 PM II scope to the U.S. market?

By: scott weber

scott weber — Thu, 15 Jan 2009 00:06:39 +0000

i would like sierra to upgrade their 240 match king dies with a smaller diameter than current bullets,to the same specs. as 1996 -97 bullets.

By: Joseph Greene

Joseph Greene — Wed, 14 Jan 2009 20:46:40 +0000

Maybe its impossible, due to the
cavity dimensions necessary for desired expansion but…

How about a high BC monolithic expanding
hollowpoint (or delrin tipped) VLD type hunting bullet.
Barnes bullets perform great, but the only two bullets they make with a BC above .500 is a 225g .338 TSX (.547) and a 647g .50 TSX (.572).

Wow thats HALF the BC of a .50 AMAX!

By: Henry Pasquet

Henry Pasquet — Wed, 14 Jan 2009 18:20:36 +0000

Can we get the bullet makers to give us standardized, accurate B.C.’s?

By: Luis Campos

Luis Campos — Wed, 14 Jan 2009 16:36:31 +0000

I would like to see .30BR brass from Lapua. There are countries where the laws/authorities demands that the brass must stamp the actual caliber of the gun.

An Anschutz 64 action .22LR rifle with a “position” stock with adjustable cheekpiece and buttplate, much like the 1907 “beginer” model and with a barrel with groves for sights. All with a reasonable price of about U$800,00. Repeater and single shot.

By: Tom Edmonston

Tom Edmonston — Wed, 14 Jan 2009 16:22:13 +0000

I would like to see either rem., savage or cz with a left hand 6.5 -55 – medium caliber hunting rifles..rem.to offer a rifle to compete w/ savages ldpv..say in 6mmppc usa…Federal offer a 22 lr. target ammo to compete w/ eley & lapua