Comments on: TECH TIP: How to Select the Right Bushing for your Neck Die https://bulletin.accurateshooter.com/2009/05/tech-tip-how-to-select-the-right-bushing-for-your-redding-neck-die/ from AccurateShooter.com Thu, 30 Apr 2026 14:59:33 +0000 hourly 1 https://wordpress.org/?v=4.1.26 By: Danny Reever https://bulletin.accurateshooter.com/2009/05/tech-tip-how-to-select-the-right-bushing-for-your-redding-neck-die/comment-page-1/#comment-2495 Sat, 16 May 2009 11:07:45 +0000 http://accurateshooter.wordpress.com/2009/05/16/tech-tip-how-to-select-the-right-bushing-for-your-redding-neck-die/#comment-2495 Personally I think .001 is not enough, and I’ll tell you why. Most of us in competition are shooting VLD’s well into the lands. Invariably, sooner or later, due to a called ceasefire you’ll have to extract a loaded round, and in doing so will dump a chamber full of powder when the bullet pulls free of the case. I use a .265 bushing under my loaded round diameter of .26735 in my .269 neck chamber which is .002 under, and have never had this problem, and I’ve extracted loaded rounds numerous times that I have seated .013 -.015 into the lands.

Danny

]]>