https://bulletin.accurateshooter.com/2010/03/safety-tip-when-using-coated-bullets/ from AccurateShooter.com Thu, 30 Apr 2026 14:59:33 +0000 hourly 1 https://wordpress.org/?v=4.1.26 https://bulletin.accurateshooter.com/2010/03/safety-tip-when-using-coated-bullets/comment-page-1/#comment-4063 Sun, 28 Mar 2010 17:17:48 +0000 http://bulletin.accurateshooter.com/?p=12681#comment-4063 Instead of firing a dozen foulers down the barrel it is better to precondition the barrel using a solution of alcohol or Kroil and the bullet lube you are using. Mix it together and run a few patches coated with it down the barrel after cleaning. The alcohol or Kroil will evaporate and leave the moly/danzac/boron nitride coating the barrel. Some people run a dry patch through the barrel before firing to remove any excess.

]]>