Comments on: Idaho Company Produces Advanced Ammo-Loading Machines

By: Marko

Marko — Mon, 12 Dec 2022 19:37:08 +0000

Hello all, impressive production machine, I own a CNC Milling, turning, and gear Machine shop and am looking to start manufacturing reloaded ammunition in southern CA can anyone point me in the right direction for materials sourcing, manufacturer’s pricing per cartridge, and who
Or how to get in touch with the correct buyers for this type of product or government contracts to fulfill?
There must be a website or portal somewhere.

By: Alexmabuza

Alexmabuza — Sun, 10 Apr 2022 09:34:34 +0000

I’m looking to start business with armmo machine

By: Kaizer

Kaizer — Mon, 26 Oct 2020 12:14:25 +0000

To whom it may concern. Do you provide operational training when purchasing the machine?

By: Michael Oswell

Michael Oswell — Thu, 24 Sep 2020 02:54:24 +0000

I am looking to start a Ammo Manufacturing company

By: Tom Johnson

Tom Johnson — Sun, 02 Feb 2014 19:50:26 +0000

I agree Joe, the component problem makes it a risky venture.

By: Joe

Joe — Sun, 02 Feb 2014 17:31:22 +0000

Now I need a smokeless powder machine to feed the ammo machine….

By: Rustystud

Rustystud — Sat, 01 Feb 2014 22:06:29 +0000

Dave Howell is the owner of Ammo Load. Very Nice guy. He makes a great loader. He helped me with a collator for my Dillon 1050. With his help I was able to get more than 3000 rounds per hour out of my 1050s loading .223 and 45 acp. His loaders are a step above the rest. — Nat Lambeth

By: Shiraz

Shiraz — Sat, 01 Feb 2014 17:12:48 +0000

I hope more small cottage industry types get into this business as some of the “big” names are shunning new customers. That is short sighted as smaller manufacturers will fill the void and will then be competition a few years down the road.

By: Marc

Marc — Sat, 01 Feb 2014 15:48:03 +0000

steve, I’ve measured the accuracy of my Dillon automatic powder filler with a lab scale using Vihtavuori N110 stick powder loading for .357 mag and found the extreme spread of 20 throws to be around +-5 mg (+-0.07 grains). I stopped worrying about the accuracy of volumetric powder charges, it’s plenty for normal use.

By: steve

steve — Sat, 01 Feb 2014 01:00:49 +0000

I find the .1gr powder charge tolerance hard to believe unless one uses ball powders.