Comments on: TripleDeuce.Net Website for .222 Remington Shooters

By: Enzo

Enzo — Wed, 14 Jul 2021 16:34:53 +0000

Sorry,my powder n133/19 grs n135/20 grs n140 22 grs n150 22 grs.v/ 820 meter sec.

By: Enzo

Enzo — Wed, 14 Jul 2021 16:30:21 +0000

I have .222 rem lapua match brass i shot 5 shot .393 group 200 meter. My barrel shilen match twist 1/8 bullet 69 sierra mk tmk or 69 smk.i very very good.

By: PAUL

PAUL — Wed, 24 Feb 2021 19:07:08 +0000

My latest update. I had two one hole groups at 100 yards yesterday using H335 26.5 gr and .015″jump. The bullets were 50gr Hornady HPFB Varminator. The Varminator had a longer base to ogive than all the others I have used and allowed for a greater neck contact. I am really glad I selected my old favorites Remington 700
in 222 RM

By: PAUL

PAUL — Sun, 21 Feb 2021 19:39:01 +0000

I picked up a 1993 Remington 700 classic three years ago in 222 cal. After pillar bedding and putting a Timney trigger on it it shoots 1/2 moa all the time H322 21.5 GR with 52 gr hpfb hornady.
I really was trying to find a 222 rem Mag when I bought it.
I finally bought a SS Remage barrel that I put on a 1966 700 action. Still working on loads but I’ve had some .3 groups with it.

By: Chuck Pfitzer

Chuck Pfitzer — Fri, 15 May 2020 20:30:24 +0000

Star Line is now making brass in 222 Rem and I have 400 rounds and I like it as much the Lapua brass and it is half the cost! Try the Star Line brass if are in need of brass.

By: Chuck Pfitzer

Chuck Pfitzer — Sat, 25 Jan 2020 22:22:17 +0000

I have TC Contenders in the 222 and find the H322 powder to work the best in all four barrels and Hornady 52 & 53 Match bullets to work best in the 14″ barrels. The 22″ Bullbery likes thr Berger 52gr. bullet the best. The 22″ will shoot under a 1/4″ at a 100YD. I shoot the 14″ in IHMSA matches and have been doing good with it. I know if a beter shooter were to shoot it it would perform even beter.

By: Neil

Neil — Wed, 18 Dec 2019 08:17:10 +0000

Hi Thomas i just picked up a westly Richards martini in 222 Rimmed.
I am using 5.6x50r brass trim it back use a regular 222 die with a 357 mag shell holder

Neil

By: Thomas Coletta

Thomas Coletta — Fri, 27 Sep 2019 02:06:52 +0000

I have a 222R 18″ heavy barrel on a Martini action. Bought from a benchrest competitor in Cincinnati years ago. Suspect it was a truck gun. Am searching for good brass. gun will fire standard 222 but wont extract.
Tom

By: CHRIS-A

CHRIS-A — Wed, 17 Oct 2018 06:17:09 +0000

G day what is the most accurate
bullet in the 222 thanks

By: Bill Rampier

Bill Rampier — Sat, 01 Sep 2018 12:49:14 +0000

My .222 is a Rem. Mod. 700 with a Lilja 22 inch stainless 3 groove barrel, 1:14 twist. Topped off with a Burris 6×24 scope. My load is with Lapua cases and CCI 450 mag. primers. Bullets are 55gr. Nosler Ballistic Tip Varminters loaded with 25gr. 748 and seated so just a slight sign of rifling can be seen on bullet. Best accuracy has been 9 consecutive shots under an inch at 500 yards. One of the 3 shot groups measured .816. For close up shots at varmints out to 100 yards, I use Nosler 52gr. bullets loaded with 6.7gr. of Unique. Velocity is at 1,940fps and 5 shot groups measure .250. The barrel has about 3,000 rnds through it with no sign of accuracy loss. This gun will give any ppc a good run for the money. For the love of the caliber and for more than 50 years with it, I just wanted to share this with you all.