Comments on: 30BR Case-Forming Tips from Randy Robinett and Al Nyhus

By: Joe

Joe — Thu, 31 Jul 2014 00:06:49 +0000

Boyd, Hal posted that comment in May of 2013 when components were harder to find.

By: Boyd Allen

Boyd Allen — Wed, 30 Jul 2014 16:48:56 +0000

Reply to above complaint about lack of relevance due to component availability problems: http://www.midwayusa.com/product/323515/lapua-reloading-brass-6mm-norma-br-bench-rest-box-of-100
Evidently Lapua 6BR brass is available.

By: Hal

Hal — Thu, 09 May 2013 13:14:42 +0000

I would like to know why any of this matters to the ordinary shooter when components are not available. A good deal of my time now consists of finding common bullets of almost any brand, powder etc.
I don’t see this as off topic when posts and articles go on a if guns, ammo and reloading material is unavailable with no end in sight.

By: Jon Lennon

Jon Lennon — Mon, 08 Oct 2012 04:16:11 +0000

It is easy to form the 30br,but I would also like to see lapua make 6ppc,30br and wsm brass especially as what is on the market sucks somewhat.We have used different types making 35 wsm out of 325 wsm cases and you loose quite a few during forming as most is too thick to begin with.If lapua would quit crunching numbers and service the shooters that love their brass,it would be a dream come true.After all we the shooters make up alot of profit for them.

By: mike

mike — Fri, 18 May 2012 22:20:38 +0000

Maybe I’m missing something of concern, but I would just turn the 6br cases(onto shoulder w/matching cutter angle) before necking up. Everything about it could be predicted & adjusted for in 2 tries.

By: Greg Verner

Greg Verner — Fri, 18 May 2012 22:08:35 +0000

I don’t understand why Lapua just doesn’t produce 30 BR brass and even 30 BR ammunition, just as they do 6BR Norma. It would be such an obvious compliment to their 6BR line.