Comments on: Tuning Balance Beam Scales for Precision and Repeatability

By: Michael Nelson

Michael Nelson — Sat, 06 Sep 2014 18:29:26 +0000

Scott, I would appreciate status on the scale order I placed with you and paid for over two weeks ago.

By: Scott Parker

Scott Parker — Thu, 04 Sep 2014 03:22:09 +0000

Hi Bill. You are welcome to call me at 661 364 1199 or email me at VLD223@yahoo.com. it would take up too much room here.

Scott

By: Mr. Bill

Mr. Bill — Thu, 04 Sep 2014 01:09:35 +0000

So how about some details on the process? Or is this a sales pitch?

By: Jim Hardy

Jim Hardy — Wed, 03 Sep 2014 01:15:05 +0000

Scot Parker does great work. His scale will easily hang with the high end scale and no electronic interference to worry about. BTW, Scott is a good, honest man. Nice to trust the person you entrust with your shooting project.

Jim Hardy

By: Pat M

Pat M — Mon, 01 Sep 2014 19:45:07 +0000

I agree that balance beam scales can be excellent. Keep it clean and watch for rust if its old, both on the knife edge that supports the beam, and the upward-facing knife edge that supports the pan.

I spent half a day stoning some rust off of my 30 year old 5-10, being very careful not to move the knife edge. The result was good – when trickling, I can usually call the number of kernels required to hit the weight.

I wish I’d known of Scott Parker.

By: John MH

John MH — Sun, 29 Dec 2013 08:35:00 +0000

Thats my scale, works like a treat.