Comments on: Guide to IMR’s Enduron Powders — What You Need to Know

By: Adam Nelson

Adam Nelson — Tue, 23 Feb 2021 05:07:44 +0000

I have been reloading 4955 in my 6.5 prc with fantastic results, 7977 was way too slow. I have been pushing a 153 grain A-tip 2900 fps!

By: chris blessing

chris blessing — Fri, 02 Oct 2020 21:05:19 +0000

are there any load data for IMR 4166 for 6.5 PRC with 140 grain bullet? thanks

By: Steve Stuttler

Steve Stuttler — Mon, 06 Apr 2020 15:16:25 +0000

Is there any load data for 222 Rem?

By: Mike Powell

Mike Powell — Sat, 15 Feb 2020 08:42:43 +0000

I reload for 204Ruger, 223R and 243W, which of the Enduron powders would you suggest for these calibres?
I am doing a review of the Enduro powders for the two shooting magazines I write for.
Many thanks, Mike

PS any load data for the abve calibres would be much appreciated.

By: STANLEY HIRST

STANLEY HIRST — Mon, 05 Aug 2019 20:05:47 +0000

can you please forward re-loading data for your enduron powders thae are 4166. 4955. 7977

By: Ray Moomey

Ray Moomey — Fri, 03 Nov 2017 16:53:45 +0000

What data do you have for the 6mm BR Norma? 70 gr and 105.

By: lee

lee — Fri, 10 Jun 2016 20:26:55 +0000

4166 is a good substitute for varget in my dasher. Be careful though. anything more than 33.5 will destroy your primer pockets. I was all the way up around 36grains in my BAT and I still didn’t have any bolt lift issues. the primer pockets were destroyed however. I don’t know any velocities as I didn’t set up my chrono. Accuracy was excellent at 33.2