Comments on: Cerakote Gun Finishing — From Start to Finish https://bulletin.accurateshooter.com/2016/12/cerakote-gun-finishing-from-start-to-finish/ from AccurateShooter.com Tue, 11 Aug 2026 16:28:08 +0000 hourly 1 https://wordpress.org/?v=4.1.26 By: Randy Chorvack https://bulletin.accurateshooter.com/2016/12/cerakote-gun-finishing-from-start-to-finish/comment-page-1/#comment-57437 Thu, 01 Aug 2019 15:45:04 +0000 http://bulletin.accurateshooter.com/?p=28702#comment-57437 I’m glad you said that the gun should be carefully degreased and surface prepped so that you can get the best results. I just bought some Cerakote for my gun and I want to apply it properly. Preparation is just as important as the act itself!

]]> By: Ron Kennedy https://bulletin.accurateshooter.com/2016/12/cerakote-gun-finishing-from-start-to-finish/comment-page-1/#comment-31296 Sun, 19 Feb 2012 15:36:55 +0000 http://bulletin.accurateshooter.com/?p=28702#comment-31296 Trying to find out about using the Cerakote air dry coating and making multiple passes to cover any missed or less than desired coating. Ex: if when you are coating a rifle barrel and you find a spot with too little coating after first pass of spraying; how long do you have to respray this area and still have barrel take and hold all material sprayed? I know the coating should not be touched to correct any runs if found, but I am concerned with getting an even coating if after 10-15 min. or so you discover a spot not coated enough—can you still spray it then and get proper results?

EDITOR: Ron, Cerakote has some very good instructional videos on its website and YouTube. These show, in great detail the proper (and safe) methods for project prep and spraying. I think if you watch the videos all the way through, some of your questions may be answered.

See: http://youtu.be/2zCjfqE8XME

See: http://youtu.be/UamrlZXH69E

]]>