Comments on: Cortina’s Corner — Video Review of Forster Co-Ax Reloading Press https://bulletin.accurateshooter.com/2017/01/cortinas-corner-video-review-of-forster-co-ax-reloading-press/ from AccurateShooter.com Mon, 24 Aug 2026 15:31:15 +0000 hourly 1 https://wordpress.org/?v=4.1.26 By: Jay Christopherson https://bulletin.accurateshooter.com/2017/01/cortinas-corner-video-review-of-forster-co-ax-reloading-press/comment-page-1/#comment-46609 Sun, 01 Feb 2015 15:06:44 +0000 http://bulletin.accurateshooter.com/?p=55854#comment-46609 I tried the curved side linkage from Inline Fabrication. The only complaint I have is that the curve changes the depth of the lever – those little stops you see on the side of the handle no longer bear against the linkage. This means you (re-)adjust all your dies and it’s also a longer stroke where the press bottoms out, rather than stopping at the stops. Mostly just annoying and not world ending, although the longer stroke doesn’t feel right to me.

In the end, since I am right handed and work from the right side of the press, I installed one curved linkage on the right side for clearance, and kept one straight linkage on the left for the stops.

]]> By: Jim Hardy https://bulletin.accurateshooter.com/2017/01/cortinas-corner-video-review-of-forster-co-ax-reloading-press/comment-page-1/#comment-46600 Sun, 01 Feb 2015 05:53:19 +0000 http://bulletin.accurateshooter.com/?p=55854#comment-46600 I have been engaged in precision loading for Almost 55 years. I have owned and still owned dozens of presses — some custom made. I have two Co-AX presses. One is about 40 years old and a new one I bought last year. They are by far the best presses I have ever used. They will match the precision of my custom arbor press die set ups.

As for Inline Fabrication, I cannot speak highly enough about their products and service. Get a beverage of your choice and go to their website for a great look-see. You can scope out the products and accessories by brand of press you are using or by product. Enjoy the beverage because you will be online for awhile. Your take-away will leave you inspired on ways to improve your shop and loading stations. It seems like I place an order with Dan every couple of weeks. I will be posting a more detailed kudo soon in the reloading section of this site. Inline Fabrication will be one of the vendors I am going to give a big shout out to. We all know what a pain it is to deal with less than stellar vendors — Inline Fabrication changes all that.

As for Erik’s continued “coaching up” features, we are all blessed to have fellow top shooters and loaders who have the time, knowledge and ability to share their experience. Erik’s series of videos help the every-day shooter to lift his game and the elite shooter to refine his game.

Jim Hardy

]]>