https://bulletin.accurateshooter.com/2021/01/flash-hole-first-aid-clearing-obstructions-in-flash-holes/ from AccurateShooter.com Fri, 03 Apr 2026 15:50:21 +0000 hourly 1 https://wordpress.org/?v=4.1.26 https://bulletin.accurateshooter.com/2021/01/flash-hole-first-aid-clearing-obstructions-in-flash-holes/comment-page-1/#comment-58007 Sun, 19 Jan 2020 01:46:25 +0000 http://bulletin.accurateshooter.com/?p=63735#comment-58007 If you had a Teslong borescope we could have seen better photos and three perfectly good cases would not have met Mr.Hacksaw. just sayin…

]]> https://bulletin.accurateshooter.com/2021/01/flash-hole-first-aid-clearing-obstructions-in-flash-holes/comment-page-1/#comment-58003 Sat, 18 Jan 2020 17:44:52 +0000 http://bulletin.accurateshooter.com/?p=63735#comment-58003 The last 5 lots of Lapua 6BR brass I’ve bought from 3 different vendors over at least a handful of years have flash holes that are just over .162 and not as consistent as the old brass. The days of leave them alone at the better 1.5mm are over. Pretty sure this changed back when they went to the blue plastic boxes. My Sinclair tool opens them to .163. Not sure about the 220 Russian. Please correct and change the Guide.

]]>