For fans of the .260 Remington, very high-quality factory ammo is now available. ABM Ammo, a division of Berger Bullets just announced that it will produce two varieties of .260 Remington ammo.

ABM’s 260 Remington 140gr Berger Match Hybrid Target ammo is designed for class-leading ballistic and superior accuracy. Using the highest-BC 6.5 mm caliber bullet offered by Berger, the 140gr Hybrid, this load features less wind deflection and more energy on target than the competition. ABM claims that this Match Hybrid ammo is “unrivaled as a long-range 260 Remington factory ammo option.” Since it pushes a higher-BC bullet than other .260 Rem factory ammo, we’d have to agree with that statement.

Match Ready 260 Remington 140gr Berger Match Hybrid Target Specifications

Mission Ready .260 Rem OTM Tactical Load for Mag-Fed Rifles
ABM Ammo also offers .260 Rem factory ammo loaded with the NEW 130gr AR Hybrid bullet. The .260 Rem 130gr Berger Match AR Hybrid OTM Tactical load is optimized for the AR-10 platform or any magazine-fed rifle. Berger’s 130gr AR Hybrid bullet offers a 0.290 G7 BC. That’s very close to the 0.317 BC of the longer 140gr Hybrid. This, combined with a 2847 FPS muzzle velocity, provides excellent performance in a shorter COAL that feeds perfectly from box magazines.

In fact, if you run the ballistics (using JBM) using ABM’s published MVs, you’ll find that you give up nothing with the shorter bullet. At 600 yards, the 130gr “Mission Ready” load has 78.8″ (12.5 MOA) of drop. By comparison, the “Match Ready” load with 140-grainers has 80.3″ (12.8) MOA of drop at 600 Yards (That’s not a mistake — the smaller bullet has LESS drop because it has a higher MV to start.) At 1000 yards, the “Mission Ready” load is virtually identical to the “Match Ready” load: The 130gr ammo has 304.6″ (29.1 MOA) of drop at 1000 vs 303.4″ (29.0 MOA) for the 140gr ammo at the same distance. (These calculations are based on standard conditions at sea level, with ABM supplied MVs.)

Because the ballistics are so close, you may want to try both loads in your .260 Rem rifle, even if you single-load and are not restricted by mag length. Some barrels may have a preference for one bullet over the other.

Product Tip from EdLongRange. We welcome reader submissions.

ABM Ammo, a division of Berger Bullets, has introduced new, high performance .308 Winchester factory ammunition, loaded with the high-BC, 185gr Berger Juggernauts. The long-loaded “Match Ready” version of this ammo is designed for Palma (Full-bore) and F-TR shooters. A “Mission Ready” version, loaded shorter to mag length, is designed for tactical and military applications. These two new offerings should “raise the bar” for long-range performance with factory .308 Win ammo.

Offering a high Ballistic Coefficient (0.560 G1, 0.283 G7), the 185-grain .308-caliber Juggernaut bullet is designed to remain stable even in the transonic zone. This way it offers good performance at extended distances, contributing to higher hit percentages at longer ranges.

Match Ready Ammo — 2.950″ COAL
The Match Ready 185gr Berger Match Juggernaut Target load for the .308 Winchester was optimized for Palma and F-Class long range competition. The velocities shown below are based on 24″ test barrels. Most Palma and F-TR competitors use much longer barrels. With 28-30″ barrels, you can expect considerably higher muzzle velocities, based on .308 Win Barrel Cut-Down Tests.

Mission Ready Ammo — 2.800″ COAL
ABM’s Mission Ready 185gr OTM Tactical ammo offers extended long range capability and more energy on target. Loaded to magazine length (SAAMI-Spec 2.800″), this ammunition works well in both bolt guns and semi-autos, delivering offers exhanced long-range ballistics.

ABM Ammo will offer precision rifle ammunition for three popular cartridge types: .308 Winchester, .300 Winchester Magnum, and .338 Lapua Magnum. There are three product lines. The “Mission Ready” line is designed for military and tactical use. In addition, ABM will offer “Hunt Ready” ammo for precision hunters and “Match Ready” ammunition for target shooters.

Each product line is loaded with the Berger bullet that best fits a given application. Each of the bullets used have been proven performers among the hand loading community for years and in some cases, decades. The chart below shows the current bullet selections for each of the three product lines:

ABM Ammo Components are Tested Lot by Lot
ABM uses high quality components and tooling to produce the most consistent ammunition possible. In a process developed by ballistics expert Bryan Litz, ABM ammo has been engineered and tested in the Applied Ballistics laboratory. ABM actually tests each individual lot of components used in the loaded cartridges to ensure quality and consistency.

Eric Stecker, President of Applied Ballistics Munitions relays, “Launching an ammunition company in today’s firearm market environment has been a challenging experience. The product will speak for itself among the shooters as to why it is so important that we pursue this effort.” To learn more about Applied Ballistics Munitions, visit www.abmammo.com.