Last week we featured a cool video put together by Forum Member Mark Dalzell (aka “MDSlammer”). The video shows Mark and a couple of his shooting buddies engaging a steel target at 2300 yards (1.3 miles). In order to see both hits and misses at that extreme range, Mark assembled a target-cam system that broadcasts multiple video cam feeds wirelessly to a receiver on the firing line. Down-range, Mark positioned a high-gain antenna. This was key — without the antenna the system’s useful range was less than 1000 yards. But with the hi-gain antenna Mark gets very clear signals from 2300 yards.

Mark’s video was very popular with our readers. Quite a few guys asked for technical details so they could start assembling a similar system. To explain the components and set-up of his 2300-yard target cam system, Mark has made a 10-minute video that shows the equipment and explains how all the gear is hooked up. Mark system uses a KW7305 2.4 Ghz, 8-channel A/V transmitter/receiver kit ($269.00), powered by Li-Ion batteries ($125.00 with charger) that offer about 3 hours of run-time. The video camera was a Panasonic HDC SD-60 with 35X zoom ($350.00). The antenna is a 2.4 Ghz 24 DBI Grid unit (model # HG2424EG-NG), that cost just $45.00 plus another $29.00 for cabling. To see how this all functions at long range, watch the video below.

Watch This 10-Minute Video to See Components of 2300-yard Target-Cam System

While Mark positioned his hi-gain antenna downrange near the target, you can, alternatively, set the hi-gain antenna at the firing line and point it downrange at the transmitter. Mark says that either configuration will work, as long as the hi-gain antenna is aimed carefully. You also need to elevate both Transmitter and Receiver antennas. Mark mounted his receiver on top of a 10-foot-tall Century C-Stand near the shooting station. From there he could watch bullet impacts on his 7″ Marshall color monitor placed on a portable bench.

Mark tells us the whole system was affordable (under $1100.00 for everything including monitor and antenna), and it was easy to set up. Mark encourages readers who’ve been thinking about building a similar system for their long range shooting sessions: “The hardware is not difficult to configure… if I can do it, anyone certainly can.”