<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Daily Bulletin &#187; Case Corrosion</title>
	<atom:link href="https://bulletin.accurateshooter.com/tag/case-corrosion/feed/" rel="self" type="application/rss+xml" />
	<link>https://bulletin.accurateshooter.com</link>
	<description>from AccurateShooter.com</description>
	<lastBuildDate>Sun, 10 May 2026 12:55:01 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>hourly</sy:updatePeriod>
	<sy:updateFrequency>1</sy:updateFrequency>
	<generator>https://wordpress.org/?v=4.1.26</generator>
	<item>
		<title>The Hazards of Old Ammo &#8212; Watch Out for Internal Corrosion!</title>
		<link>https://bulletin.accurateshooter.com/2020/08/the-hazards-of-old-ammo-watch-out-for-internal-corrosion/</link>
		<comments>https://bulletin.accurateshooter.com/2020/08/the-hazards-of-old-ammo-watch-out-for-internal-corrosion/#comments</comments>
		<pubDate>Sat, 01 Aug 2020 12:22:57 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[Bullets, Brass, Ammo]]></category>
		<category><![CDATA[Gunsmithing]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Tech Tip]]></category>
		<category><![CDATA[300 Win Mag]]></category>
		<category><![CDATA[300 Winchester Magnum]]></category>
		<category><![CDATA[Case Corrosion]]></category>
		<category><![CDATA[Corrosion]]></category>
		<category><![CDATA[Old Ammunition]]></category>
		<category><![CDATA[Vintage Ammo]]></category>

		<guid isPermaLink="false">http://bulletin.accurateshooter.com/?p=63098</guid>
		<description><![CDATA[Above is a 26-year-old hand-loaded .300 Winchester Magnum case that failed to fire. After the misfire, the shooter used an inertial (impact) bullet puller to pull the bullet. In the process the case-neck sheared off. Here&#8217;s a cautionary tale from the Tactical Rifle Shooters Facebook group. This real-world example explains why you should be cautious [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img src="https://accurateshooter.net/pix/corrod1901shad.jpg" alt="300 Winchester Magnum winmag reloading hand-loading powder corrosion"><br />
<em>Above is a 26-year-old hand-loaded .300 Winchester Magnum case that failed to fire. After the misfire, the shooter used an inertial (impact) <a href="https://amzn.to/31TdORl" target="_blank">bullet puller</a> to pull the bullet. In the process the case-neck sheared off.</em></p>
<p>Here&#8217;s a cautionary tale from the <a href="https://www.facebook.com/tacticalrifleshooters/" target="_blank">Tactical Rifle Shooters</a> Facebook group. This real-world example explains why you should be cautious of old ammunition. Here serious internal corrosion was discovered.</p>
<h2>Old Ammunition &#8212; Why You Should Be Careful</h2>
<p><em>Commentary by</em> <a href="https://www.facebook.com/tacticalrifleshooters/" target="_blank">Tactical Rifle Shooters</a><br />
The subject often comes up as to whether it is safe to shoot old ammunition. Historically my answer has always been yes, since over the years I have shot military surplus ammo dating back to World War II (1939-1945) and never had a problem. With over 40 years in competitive shooting, I&#8217;ve also had boxes of factory ammo that were 30+ years old and all worked flawlessly.</p>
<p>But I had an interesting experience this week shooting some .300 Winchester Magnum (WinMag) that I had loaded for competition with Reloder 22 back in 1993. I was breaking in a new barrel so just shooting any old ammo that I had. Of the 20 rounds, 15 shot perfectly, three had a fraction of a second hang-fire, and two didn&#8217;t shoot at all.</p>
<blockquote><p><big>SMART TIP: If you have old ammunition, pull one bullet to see what&#8217;s going on inside.</big></p></blockquote>
<p>So I pulled the bullets using a hammer-type impact (inertial) bullet puller. What I found was verdigris-like corrosion inside the necks, with <strong>one neck completely separating</strong>. One reason for this could be that dissimilar metals (copper and brass) can set up a reaction resulting in corrosion. Like I said, this is the first time I&#8217;ve seen this, but will definitely be more aware when shooting old hand-loads in the future.</p>
<p><img src="https://accurateshooter.net/pix/corrod1902.jpg" alt="300 Winchester Magnum winmag reloading hand-loading powder corrosion"></p>
<p>Above is one of the 26-year-old reloaded .300 WinMag cartridges which had failed to fire. To check the internal condition, the bullet was removed using an impact (inertial) bullet puller. Note the verdigris-like corrosion and crack in neck.</p>
<p><img src="https://accurateshooter.net/pix/corrod1903.jpg" alt="300 Winchester Magnum winmag reloading hand-loading powder corrosion"></p>
<p>Here&#8217;s a close-up of the same .300 Winchester Magnum hand-load from 1993 showing serious corrosion inside the neck. (This was a fail-to-fire.) The powder was Alliant Reloder 22. If you have old ammo, it wouldn&#8217;t hurt to pull one bullet to see what&#8217;s going on inside.</p>
<p><i>CREDIT <a href="https://www.facebook.com/tacticalrifleshooters/" target="_blank">Tactical Rifle Shooters</a> Facebook Group for this Ammo Tech Tip and photos.</i></p>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2020/08/the-hazards-of-old-ammo-watch-out-for-internal-corrosion/feed/</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
	</channel>
</rss>
