Sinclair International has a good article on Case Lubrication which shows the various products and application methods available. Part of Sinclair’s Step-By-Step Reloading series, the article shows how to apply Spray Lube, Die Wax, or conventional lube from a Pad. The story also explains how to use dry lube to slick up the inside of your case necks.

Spray Lubes
High-volume reloaders often turn to spray-on lubricants such as the RCBS Case Slick (#749-001-341WB) or the Hornady One Shot (#749-016-818WB) to quickly lubricate large numbers of cases at once. An indispensable piece of gear that helps make spray lubing easy is a polymer lube rack that holds cases upright and arranged to maximize their exposure to the spray.

Editor’s Note: Ballistol Aerosol is other good spray product for regular full-length sizing (not heavy case-forming). It goes on clear (no chalky residue), it is ultra-slippery, and it will remove the carbon from your case necks as you apply Ballistol with a patch. This is my primary spray lube — but many folks dislike the distinctive Ballistol smell. Try before you buy.

Sizing Die Wax
Over the years, many benchrest shooters have come to trust Imperial Sizing Die Wax (#749-001-052) for their case lube needs. It offers high lubricity and easily wipes off with a paper towel. In fact, its lubricity makes it a popular choice for case forming, for those wildcat folks who need to form their own unique or obsolete cartridges. Unlike lube pads or spray lubes, sizing wax is applied more naturally. You just put a little on your fingers and transfer it to the cases by handling them. As simple and easy as Imperial Sizing Die Wax is to use, it’s probably best for low-volume applications.

Dry Lubricant
Redding’s Imperial Application Media (#749-001-166) is a dry neck lube used to lube the inside of the neck, whether you’re full-length sizing or neck-sizing only. It consists of ceramic spheres coated with a fine graphite-based powder. You simply dip the neck into the container for a second to pick up the right amount of lube. This lube lets the expander ball move smoothly throughout the case neck instead of “grabbing” or “chattering”. That minimizes case neck stretching.

Editor’s Note: Dry Lube is also very useful if you ultrasonically clean your cases. After the ultrasound process, the inside of the case neck can be so “squeaky clean” that bullets don’t seat smoothly. A quick application of dry lube on the insisde of the necks will help bullets slide into the neck easier. As a result, the neck “grip” on the bullets should be more consistent from round-to-round. Consistent neck tension is key to accuracy and uniform velocities.

DIY Case Lube Instructions from UltimateReloader.com »

Tired of spending $15-$25 for a can of spray lube that doesn’t last very long? For about the same price as a single 10 oz. can you can make your own effective spray lube that should last for multiple seasons and lube thousands of cases quickly and easily.

In the YouTube video above Gavin Gear of UltimateReloader.com shows how to make your own case lube using simple, inexpensive ingredients. First recommended by the 6.5 Guys, this Liquid Lanolin + Isopropyl Alcohol mix works well and is very cost-effective. Here’s what you need:

1. Swan Isopropyl Alcohol, 99%, Pint, 16 Ounce (2-pack)
2. Home Health Liquid Lanolin, 4 Ounce
3. Chemical Guys ACC_121.16HD-3PK Chem. Resistant Heavy Duty Bottle/Sprayer (16 oz.)