2019 will be a big year for Lyman. This company is rolling out a number of new products, including three unveiled today: a variable-speed case trimmer, a universal press stand, and a really nice shooting mat. We think all three products offer some very cool features and a lot of performance for the price.

For 2019, Lyman offers the Case Trim Xpress, a new, affordable variable-speed case trimmer with a razor-sharp CARBIDE CUTTER. Available in either 115V or 230V, the Case Trim Xpress can quickly and accurately trim brass at a rate of approximately 15 cases a minute. The unit has its own power source, and a strong variable-speed motor, so there is no need to use power drills. Using the 10 provided bushings, the unit indexes off the case shoulder — that’s simple, fast and reliable. Plus a precision trim adjustment wheel allows case lengths to be easily “dialed in” to 0.001″ increments. To trim your brass, simply push the case against the carbide cutter until the shoulder stops on the bushing (with precise case OAL set by the wheel). The Case Trim Xpress comes with 10 bushings that fit the most popular bottleneck rifle cartridges, so no pilots are needed. Expected retail price is around $140.00.

• Fast and accurate — trims approximately 15 cases per minute
• Variable speed motor and ultra-sharp, long-lasting carbide cutter
• Utilizes case shoulders for centering and indexing cases (not for straight-walled cases)
• Comes with 10 bushings fitting the most popular bottleneck rifle cartridges — no pilots needed.
• Spring-loaded operation allows smooth, chatter-free trims
• Compact, low-profile design uses minimal bench space

Lyman says that its new Lyman Press Stand is the only press stand on the market that will accept most current single station, turret and progressive presses of any brand. The stand is heavy-duty steel for strength, pre-drilled for common presses. It will elevate your press 9 ¼” above the bench, providing a clear view of all reloading operations while keeping the operator in an upright, back-healthy position. Raising your press can reduce fatigue while giving you extra room (below) to hold bullet boxes and dies.

Press Stand Fits All these Presses and More:
Lyman: All-American 8 Turret, Crusher, Ideal C-Frame, T-Mag, Victory
RCBS: Rock Chucker, Rock Chucker Supreme, RCBS 6 Turret, Pro 2000
Lee: Load Master, Pro 1000, Classic, Value Turret
Hornady: AP, Iron, Lock-N-Load Classic
Dillon: 550, 650, Square Deal
Redding: T7 Turret

Tac-Mat Long Range Shooting Mats

For 2019 Lyman will offer new Tac-Mat Long Range Shooting mats — in both standard and HD padded versions. These mats are long enough for tall shooters, but they still can be rolled into a compact, easy to transport size. The Tac-Mat will be offered in two versions: a basic design in 600D construction with a carry handle and shoulder strap, or the heavy-duty version (HD) in 1000D construction with elbow pads, a built-in bipod stop, carry handle and shoulder strap. We like these new mats — a lot of smart thinking went into their designs and features.

Want more info on all Lyman products? Click this link for Complete 2019 Lyman Product Catalog.

For a few years now, Lyman has offered the Case Prep Xpress, an all-in-one case prep center that chamfers necks (inside and out), cleans and uniforms primer pockets, brushes the inside of case-necks, and uniforms flash holes. The unit can also ream out the crimps on military brass. However, the Lyman Case Prep Xpress does NOT trim cases.

The Lyman Case Prep Xpress comes with all the necessary tools (listed above), so you don’t have to purchase extra accessories. The five (5) gear-driven heads on the unit are powered by a high torque, low-speed motor ideal for case prep operations. Lyman’s Case Prep Xpress features handy storage areas for accessories, a removable brass shavings dump pan, and a handy clean-up brush.

Sinclair Int’l video clearly illustrates all case prep functions. Worth watching.

In the 5 years that this product has been on the market it has been a strong seller. If you’re prepping hundreds of cases, this unit will save considerable time and reduce hand/finger fatigue. While the Case Prep Xpress is not as sturdy as the metal-bodied Hornady prep center, the Lyman unit offers a lot of functionality for the money ($115-$125 normal price, and sometimes around $100 on sale).

Reviews by Verified Purchasers

“Case prep is the most tedious and boring aspect for hand loading in my opinion. The process center makes all the steps in prepping the case very quick and with consistent results. It has reduced the time required to do these steps with separate tools by easily 50% if not more. Highly recommended.” — Brandon G.

“Quiet and capable. Worth every penny. I adapted a Lee Cutter and Lock Stud, to cut case lengths, and I can fly through my brass. I can do so much more brass without getting the sore, cramped-up hands.” — Dean Ellis

“This unit has plenty of torque, and my unit is very quiet. This unit will also work with tools made by RCBS and Hornady, or anything else with 8-32 threads. My Redding tools (specifically, my primer pocket uniformers) do in fact fit on this machine. This unit is certainly worth the money, and will revolutionize the way you reload by saving you massive amounts of time and wear on your hands/fingers.” — Mule

“A simple machine to perform complex solutions. I was up and running in about 10 minutes flat. This thing has made my life of reloading so much easier. I do wish there was a trimmer included, but I have a manual one from L.E. Wilson.” — Richard Niles

You can find Lyman’s Case Prep Xpress for under $100.00 at Amazon and under $120.00 at Brownells, making it much less expensive than the larger Hornady Case Prep Center, which runs over $450.00. The Hornady unit is beefier, and will trim cases. However, we think the compact Lyman unit makes sense for guys who already have a good case trimmer, such as a Forster or Wilson. The Lyman Case Prep Xpress is hundreds of dollars less than the Hornady prep center. The money you save will buy lots of bullets and brass.

Case Prep Xpress $99.99 at Amazon
The Lyman Case Prep Xpress is sold by most of the big vendors. The best current price we found was at Amazon, which sells the Lyman unit for $99.99, with free shipping.

Every serious hand-loader can use a powered Case Prep station. This multi-function device saves time and avoids repetitive manual labor (that can be downright painful after 50+ cases). Now you can get the Lyman Case Prep Xpress for a crazy low price. Midsouth just slashed its price on the Case Prep Express, and this unit also qualifies for a sweet $25 Rebate from Lyman. That puts your net cost at just $84.99. Hard to argue with that. Your wrists and fingers will thank you.

The Case Prep Xpress lets you chamfer inside and out, brush case-necks, clean/uniform primer pockets, and ream military crimps. However, the unit does NOT trim cases. The motor is powerful and the Xpress is easy to clean. On sale at MidSouth for $109.99 ($84.99 after Rebate), this is a great deal. You can also purchase at Amazon for $107.71 with free Prime Shipping ($82.71 after Rebate).

The Lyman Case Prep Xpress comes with all the necessary tools (listed above), so you don’t have to purchase extra accessories. The five (5) gear-driven heads on the unit are powered by a high torque, low-speed motor ideal for case prep operations. Lyman’s Case Prep Xpress features handy storage areas for accessories, a removable brass shavings dump pan, and a handy clean-up brush.

Sinclair Int’l video clearly illustrates all case prep functions. Worth watching.

In the four years that this product has been on the market it has been a strong seller. If you’re prepping hundreds of cases, this unit will save considerable time and reduce hand/finger fatigue. While the Case Prep Xpress is not as sturdy as the metal-bodied Hornady prep center, the Lyman unit offers a lot of functionality for the money.

Reviews by Verified Purchasers

“Case prep is the most tedious and boring aspect for hand loading in my opinion. The process center makes all the steps in prepping the case very quick and with consistent results. It has reduced the time required to do these steps with separate tools by easily 50% if not more. Highly recommended.” — Brandon G.

“Quiet and capable. Worth every penny. I adapted a Lee Cutter and Lock Stud, to cut case lengths, and I can fly through my brass. I can do so much more brass without getting the sore, cramped-up hands.” — Dean Ellis

“This unit has plenty of torque, and my unit is very quiet. This unit will also work with tools made by RCBS and Hornady, or anything else with 8-32 threads. My Redding tools (specifically, my primer pocket uniformers) do in fact fit on this machine. This unit is certainly worth the money, and will revolutionize the way you reload by saving you massive amounts of time and wear on your hands/fingers.” — Mule

The Lyman Case Press Xpress comes with all the necessary tools and attachments (listed below), so you don’t have to purchase extra accessories. The 5 gear-driven heads on the unit are powered by a high torque, low-speed motor ideal for case prep operations. Lyman’s Case Prep Xpress features handy storage areas for accessories, a removable brass shavings dump pan, and a handy clean-up brush.

Lyman Case Prep Xpress Includes: Inside Deburr (VLD) Tool Outside Deburr Tool Flash Hole Uniformer Primer Pocket Uniformer (Large & Small) Primer Pocket Reamer (Large & Small) Primer Pocket Cleaner (Large & Small) Case Neck Brushes (25, 30, 38 & 45 Cal) Case Neck Lube (Mica) Removable Brass Shavings Dump Pan Clean-up Brush

In the two years that this product has been on the market it has been a hot seller. We’ve used the Case Prep Xpress. If you’re prepping hundreds of cases, this unit will save considerable time and reduce hand/finger fatigue. While the Case Prep Express is not as sturdy as the metal-bodied Hornady prep center, the Lyman unit offers a lot of functionality for the price ($108-$125 at various vendors).

Video clearly illustrates all case prep functions. Worth watching.

You can find Lyman’s Case Prep Xpress for under $120.00, making it much less expensive than the larger Hornady Case Prep Center, which runs about $400.00. The Hornady unit is beefier, and will trim cases. However, we think the compact Lyman unit makes sense for guys who already have a good case trimmer, such as a Forster or Wilson. The Lyman Case Prep Xpress is hundreds of dollars less than the Hornady prep center. The money you save will buy lots of bullets and brass.

Case Prep Xpress $108.08 at Midsouth
The Lyman Case Prep Xpress is sold by most of the big vendors. The best current price we found was at Midsouth Shooters Supply, which sells the Lyman unit for $108.08.