Giraud Tool offers a case trimmer/chamferer device that works with a power drill (or other power source). Giraud’s patented Tri-Way Trimmer is a self-contained unit powered by your drill or motor. Using a sharp carbide blade it will trim your cases to length, deburr, and cut both inside and outside chamfers — all in one pass. That’s pretty impressive for a $120.00 tool that fits in the palm of your hand.

Product Features
1. Fully adjustable for cartridge length (and depth of chamfer).
2. Carbide blade cuts a 15° inside case mouth chamfer and 45° outside chamfer.
3. Case holder supported by sealed ball bearing raceway.
4. Tool includes removable, transparent plastic chip guard.
5. Tool can work in any orientation (vertical, horizontal, or any angle).

The Giraud Tri-Way Trimmer is designed to be powered by a portable hand drill, drill press, or other dedicated rotating power source. The tool indexes off the shoulder of your cases, but the blade adjusts so that cartridge overall length (COAL) can be controlled with precision. Constructed out of 6061-T6 aluminum and 303 stainless steel, the Tri-Way tool should last a lifetime. Note: This tool is not universal. The Tri-Way is dedicated to a single cartridge and “related” cartridges with similar body dimensions. Thus you need a specific tool for each cartridge family. For example, the .308 Win tool will also trim .243 Win, .260 Rem, and 7mm-08.

Cartridge Sizes Available for Giraud Tri-Way Trimmer:
.223 Remington (Also trims .17 Remington, .204 Ruger, .222 Remington, .222 Remington Magnum)
7.62 x 39mm (Russian)
.300 Blackout (Also trims .17 Rem Fireball, .20 Vartarg, .221 Fireball)
.308 Winchester (Also trims .243 Winchester, .260 Remington, 7mm-08)
.30-06 Springfield (Also trims .25-06, .270 Winchester, .280 Remington)
.300 Winchester Mag (Also trims .264 Win Magnum, 7mm Rem Magnum, .308 Norma Magnum)

A good case trimmer is an essential tool for precision hand-loading. To ensure consistent loads, you want your cases to be the exact same length. Today’s Saturday Showcase features five trimming tools, both powered and manually operated, that can trim your sized brass with great precision. In addition, some of these tools will also chamfer case necks inside and out. The powered case trimmers will save you considerable time (and effort) when working will large batches of brass.

Lead photo shows the Henderson Gen 2 trimmer from Panhandle Precision video review.

Henderson Gen 3 Power Trimmer — Ultimate Reloader Review

Gavin Gear of UltimateReloader.com has tested the impressive Henderson Gen 3 (V3) Trimmer. You’ll find a full write-up on Gavin’s website, and you can watch Gavin’s 18.7-minute video review above.

Gavin states: “The Henderson Gen 3 case trimmer is built on an adjustable tri-trim 3-way cutter with different pilots to accommodate different case necks. Three-way cutters trim to length and chamfer the inside and outside all at once. This trimmer has a 1700 RPM spindle and a custom DC motor made in the USA. The Henderson trimmer works much like a milling machine. You do not need much torque because of the way the taper works. The Henderson Gen 3 trimmer delivered outstanding cartridge length consistency after trimming. This trimmer is fast and easy to use and most importantly, returns consistent results.”

CLICK HERE for Henderson Gen 2 Trimmer video review, which shows how to how to set trim length and change cutter heads, using 6.5×47 Lapua, .260 Remington, and .300 Winchester Magnum cases.

Giraud Power Case Trimmer — Full Review by Erik Cortina

In this video, Erik Cortina of CortinaPrecision.com offers some very clever and useful tips that will help you get the most from your Giraud powered case trimmer. The Giraud trimmer is very precise. When set up correctly, it can trim brass with amazing consistency.

In the video, Erik trims 5 pieces of brass in 15 seconds (6:32 mark). He then measures all five with precision calipers (7:00-8:08). All lengths are exact within .0005 (half a thousandth). Erik notes that the Giraud trimmer indexes off the case shoulder. As long as you have fire-formed brass with consistent base-to-shoulder dimensions, you should get very consistent trim lengths.

Lyman Powered Case Trimmer Review

The Lyman Case Trim Xpress is an efficient, precise unit that allows easy adjustment of trim length with a click-adjustable collar. The trimmer comes with a set of cartridge-specific bushings that index off the case shoulder. One nice feature is a variable speed control. For the price, $146.20 on Amazon, this trimmer delivers excellent performance. To see more details, check out F-Class John’s video review of the Lyman Case Trim Xpress which shows set-up and operation.

Frankford Arsenal Universal Case Trimmer (for Power Drills)

This video features a handy tool that attaches to a portable drill. Used with various diameter collets, this can trim most popular sizes of shouldered brass. The universal collet system indexes on case shoulders for precise and consistent trimming (this does NOT work with straight-walled cartridges). The built-in depth micrometer allows for quick and precise micro-adjustments. There is a handy brass shaving ejection port. The system works well, particularly if you can stabilize your power drill in one position. This Frankford Arsenal trimmer, under $65.00 on Amazon, is an affordable alternative to the top-end powered case trimmers. It comes with a handy plastic case that holds the trimmer and collets.

L.E. Wilson Manual Case Trimmer

L.E. Wilson, makers of hand dies, case trimmers and other precision reloading tools, makes a popular and precise stainless steel case trimmer with micrometer adjustment. The above video explains the operation of the Wilson trimmer and shows how to trim cases and use the micrometer case length control positioned opposite the hand crank. We definitely like the micrometer control. This feature allows you to set the cartridge overall trim length with great precision. If you are trimming a variety of different cartridge types, the micrometer cut length control comes in very handy.

If you own a L.E. Wilson case trimmer, you should watch the official Accessories Video from L.E. Wilson. This video shows accessories for the L.E. Wilson trimmer. These include: Power Adapter for trimming (replaces hand crank), Titanium Case Trimmer Cutter (longer life), Inside Case Neck Reamer, Primer Pocket Reamer (removes military crimps), Uniform De-Burring Tool, Neck Chamfer Tool (30° and 45°), and handheld inside/outside deburring tool (and power adapter).

BONUS Video: How Important is Consistent Case Length?

This Primal Rights video explains why it is important to maintain precise case lengths if you want best accuracy and most consistent ES/SD. You’ll want to size your cases BEFORE trimming if your trimmer indexes off the case shoulders.

Giraud Tool offers a case trimmer/chamferer device that works with a power drill (or other power source). Giraud’s patented Tri-Way Trimmer is a self-contained unit powered by your drill or motor. Using a sharp carbide blade it will trim your cases to length, deburr, and cut both inside and outside chamfers — all in one pass. That’s pretty impressive for a $120.00 tool that fits in the palm of your hand.

Product Features
1. Fully adjustable for cartridge length (and depth of chamfer).
2. Carbide blade cuts a 15° inside case mouth chamfer and 45° outside chamfer.
3. Case holder supported by sealed ball bearing raceway.
4. Tool includes removable, transparent plastic chip guard.
5. Tool can work in any orientation (vertical, horizontal, or any angle).

The Giraud Tri-Way Trimmer is designed to be powered by a portable hand drill, drill press, or other dedicated rotating power source. The tool indexes off the shoulder of your cases, but the blade adjusts so that cartridge overall length (COAL) can be controlled with precision. Constructed out of 6061-T6 aluminum and 303 stainless steel, the Tri Way tool should last a lifetime. Note: This tool is not universal. The Tri Way is dedicated to a single cartridge and “related” cartridges with similar body dimensions. Thus you need a specific tool for each cartridge family. For example, the .308 Win tool will also trim .243 Win, .260 Rem, and 7mm-08.

Cartridge Sizes Available for Giraud Tri Way Trimmer:
.223 Remington (Also trims .17 Remington, .204 Ruger, .222 Remington, .222 Remington Magnum)
7.62 x 39mm (Russian)
.300 Blackout (Also trims .17 Rem Fireball, .20 Vartarg, .221 Fireball)
.308 Winchester (Also trims .243 Winchester, .260 Remington, 7mm-08)
.30-06 Springfield (Also trims .25-06, .270 Winchester, .280 Remington)
.300 Winchester Mag (Also trims ​Also trims .264 Winchester Magnum, 7mm Remington Magnum, .308 Norma Magnum)

Last week Hornady introduced a variety of new products that will be introduced in 2025. These include reloading products, advanced dies, a power case trimmer and a large variety of new bullets and ammo types. CLICK HERE to see all new-for-2025 Hornady products.

Henderson-Style 3-in-1 Power Trimmer

Hornady has a new High Speed 3-in-1 Power Case Trimmer that borrows many features from the excellent Henderson Gen 3 Trimmer such as twin horizontal support shafts. This new trimmer offers quick, smooth case movement into the cutter. With a helpful see-through shield this trimmer can handle brass from 1.45″ to 3.5″ in length and with necks from .22 to .30 caliber.

Like the Henderson, this Hornady unit can trim, chamfer and deburr in a single step. The trimmer features a click-adjustable micrometer for precise and consistent trimming. The powerful 2000+ RPM motor allows rapid case trimming/chamfering. This unit may prove a good choice for shooters who need to process hundreds of cases.

New 6mm GT Ammunition with 109gr ELD Bullets

The 6mm GT is bigger than the 6mmBR Norma (aka “6BR”) but smaller than the 6mm Creedmoor. This cartridge is proving popular with PRS/NRL competitors because it feeds better from standard magazines that the shorter 6mmBR, Dasher, and 6BRA cartridges, yet it still offers very good accuracy and barrel life. 6mm GT brass is now available from Alpha Munitions. The Alpha 6mm GT brass is better and longer-lasting than the Hornady 6mm GT brass.

For 2025, Hornady is producing new 6mm GT ammo loading with tipped 109gr ELD Match bullets. Hornady states: “Designed from the very beginning to be an amazing all-around precision rifle competition cartridge, the 6mm GT provides low recoil, good barrel life, and outstanding external ballistics. [The 6mmGT] cartridge and chamber were designed simultaneously to ensure match-grade tolerances and accuracy.”

Match-Grade Reloading Dies For 2025, Hornady will offer “New and Improved Match Grade Dies” with click-adjust micrometer seating controls. For 2025, the handy click micrometer controls comes factory-installed on Hornady’s Match Grade seating dies. With its tactile clicks for precise .001″ adjustments, this easy-to-use micrometer helps ensure very consistent seating depths for hand-loaded ammo. Along with the micrometer-top seating dies, Hornady offers modern case sizing dies. These dies feature the ability to use interchangeable, self-centering neck size bushings that eliminate the chance of over sizing your case necks and overworking the brass. Two types of sizing dies are offered: full-length sizing and “shoulder bump neck size”.

Hornady Aluminum Loading Block

If you want a heavy loading block that stays put on your loading bench and won’t tip or slide, consider Hornady’s new Aluminum Loading Block. Made from 6061-T6 aluminum, the new Aluminum Loading Block makes reloading easy and efficient. Designed for the 6.5 Creedmoor, .308 Win, and .30-06 Springfield cartridge families, this loading block boast a bullet recess on the right plus an easy-to-clean red anodized aluminum finish.

Lyman’s popular Case Trim Xpress is an affordable, variable-speed case trimmer with a razor-sharp CARBIDE CUTTER. The Case Trim Xpress can quickly and accurately trim brass at a rate of approximately 15 cases a minute. The unit has its own power source — a strong variable-speed motor. Using the 10 provided bushings, the unit indexes off the case shoulder — that’s simple, fast and reliable. Plus a precision trim adjustment wheel allows case lengths to be easily “dialed in” to 0.001″ increments. To trim your brass, simply push the case against the carbide cutter until the shoulder stops on the bushing (with precise case OAL set by the wheel). The Case Trim Xpress comes with 10 bushings that fit the most popular bottleneck rifle cartridges, so no pilots are needed. This is available now for $142.03 on Amazon.

The Lyman Case Trim Xpress is an accurate, easy-to-adjust, shoulder-indexing, carbide-bladed, and SPEEDY case trimmer for under $145.00.

Lyman Case Trim Xpress “Hands-On” Review

Review by F-Class John
Case trimming can be one of the most boring and tedious steps in the reloading processes. This is largely because of outdated tools that either require manual turning, clunky pilot systems, or difficult adjustments. In order to overcome these obstacles, you might have to spend $500 for some premium systems. But Lyman’s bright orange Case Trim Xpress delivers premium trimming performance at an affordable price. Available for around $145, this trimmer offers an easily-adjustable cutting head plus a smart, shoulder-indexing bushing system to improve consistency and speed up the trimming process.

CLICK photo for full-screen view of Case Trim Xpress unit.

The Lyman Case Trim Xpress comes with the main trimming unit, power cord, and 10 bushings in a storage case. These 10 orange bushings let you trim more than 50 popular cartridge types (yes including the 6mmBR, 6.5 Creedmoor, and .308 Win of course). Set-up was simple and straight-forward. Install the bushing you need, turn the unit on and slowly push a piece of brass towards the cutting head. Once the brass is fully depressed, you can start adjusting the dial one click at a time until the case makes contact. Then you start making progressive adjustments and trim until you reach your desired length. The process is so simple that it’ll leave you wondering how you ever used anything else.

Giraud Tool offers a case trimmer/chamferer device that works with a power drill (or other power source). Giraud’s patented Tri-Way Trimmer is a self-contained unit powered by your drill or motor. Using a sharp carbide blade it will trim your cases to length, deburr, and cut both inside and outside chamfers — all in one pass. That’s pretty impressive for a $110.00 tool that fits in the palm of your hand.

Product Features
1. Fully adjustable for cartridge length (and depth of chamfer).
2. Carbide blade cuts a 15° inside case mouth chamfer and 45° outside chamfer.
3. Case holder supported by sealed ball bearing raceway.
4. Tool includes removable, transparent plastic chip guard.
5. Tool can work in any orientation (vertical, horizontal, or any angle).

The Giraud Tri-Way Trimmer is designed to be powered by a portable hand drill, drill press, or other dedicated rotating power source. The tool indexes off the shoulder of your cases, but the blade adjusts so that cartridge overall length (COAL) can be controlled with precision. Constructed out of 6061-T6 aluminum and 303 stainless steel, the Tri Way tool should last a lifetime. Note: This tool is not universal. The Tri Way is dedicated to a single cartridge and “related” cartridges with similar body dimensions. Thus you need a specific tool for each cartridge family. For example, the .308 Win tool will also trim .243 Win, .260 Rem, and 7mm-08.

Cartridge Sizes Available for Giraud Tri Way Trimmer:
.223 Remington (Also trims .17 Remington, .204 Ruger, .222 Remington, .222 Remington Magnum)
7.62 x 39mm (Russian)
.300 Blackout (Also trims .17 Rem Fireball, .20 Vartarg, .221 Fireball)
.308 Winchester (Also trims .243 Winchester, .260 Remington, 7mm-08)
.30-06 Springfield (Also trims .25-06, .270 Winchester, .280 Remington)
.300 Winchester Mag (Also trims ​Also trims .264 Winchester Magnum, 7mm Remington Magnum, .308 Norma Magnum)

A good case trimmer is an essential tool for precision hand-loading. To ensure consistent loads, you want your cases to be the exact same length. Today’s Saturday Showcase features five trimming tools, both powered and manually operated, that can trim your sized brass with great precision. In addition, some of these tools will also chamfer case necks inside and out. The powered case trimmers will save you considerable time (and effort) when working will large batches of brass.

Lead photo shows the Henderson Gen 2 trimmer from Panhandle Precision video review.

Henderson Gen 3 Power Trimmer — Ultimate Reloader Review

Gavin Gear of UltimateReloader.com has tested the impressive Henderson Gen 3 (V3) Trimmer. You’ll find a full write-up on Gavin’s website, and you can watch Gavin’s 18.7-minute video review above.

Gavin states: “The Henderson Gen 3 case trimmer is built on an adjustable tri-trim 3-way cutter with different pilots to accommodate different case necks. Three-way cutters trim to length and chamfer the inside and outside all at once. This trimmer has a 1700 RPM spindle and a custom DC motor made in the USA. The Henderson trimmer works much like a milling machine. You do not need much torque because of the way the taper works. The Henderson Gen 3 trimmer delivered outstanding cartridge length consistency after trimming. This trimmer is fast and easy to use and most importantly, returns consistent results.”

CLICK HERE for Henderson Gen 2 Trimmer video review, which shows how to how to set trim length and change cutter heads, using 6.5×47 Lapua, .260 Remington, and .300 Winchester Magnum cases.

Giraud Power Case Trimmer — Full Review by Erik Cortina

In this video, Erik Cortina of CortinaPrecision.com offers some very clever and useful tips that will help you get the most from your Giraud powered case trimmer. The Giraud trimmer is very precise. When set up correctly, it can trim brass with amazing consistency.

In the video, Erik trims 5 pieces of brass in 15 seconds (6:32 mark). He then measures all five with precision calipers (7:00-8:08). All lengths are exact within .0005 (half a thousandth). Erik notes that the Giraud trimmer indexes off the case shoulder. As long as you have fire-formed brass with consistent base-to-shoulder dimensions, you should get very consistent trim lengths.

Lyman Powered Case Trimmer Review

The Lyman Case Trim Xpress is an efficient, precise unit that allows easy adjustment of trim length with a click-adjustable collar. The trimmer comes with a set of cartridge-specific bushings that index off the case shoulder. One nice feature is a variable speed control. For the price, $146.20 on Amazon, this trimmer delivers excellent performance. To see more details, check out F-Class John’s video review of the Lyman Case Trim Xpress which shows set-up and operation.

Frankford Arsenal Universal Case Trimmer (for Power Drills)

This video features a handy tool that attaches to a portable drill. Used with various diameter collets, this can trim most popular sizes of shouldered brass. The universal collet system indexes on case shoulders for precise and consistent trimming (this does NOT work with straight-walled cartridges). The built-in depth micrometer allows for quick and precise micro-adjustments. There is a handy brass shaving ejection port. The system works well, particularly if you can stabilize your power drill in one position. This Frankford Arsenal trimmer, under $65.00 on Amazon, is an affordable alternative to the top-end powered case trimmers. It comes with a handy plastic case that holds the trimmer and collets.

L.E. Wilson Manual Case Trimmer

L.E. Wilson, makers of hand dies, case trimmers and other precision reloading tools, has videos whoe Wilson stainless steel case trimmer with micrometer adjustment (photo below). The first video explains the operation of the Wilson trimmer and shows how to initially assemble the tool, attach the handle, and set the cut length.

This second video shows how to set up the stainless Wilson trimmer with micrometer cut-length control. The micrometer feature allows you to set the cartridge overall trim length with great precision. If you are trimming a variety of different cartridge types, the micrometer cut length control comes in very handy.

BONUS Video: How Important is Consistent Case Length?

This Primal Rights video explains why it is important to maintain precise case lengths if you want best accuracy and most consistent ES/SD. You’ll want to size your cases BEFORE trimming if your trimmer indexes off the case shoulders.

Giraud Tool offers a case trimmer/chamferer device that works with a power drill (or other power source). Giraud’s patented Tri-Way Trimmer is a self-contained unit powered by your drill or motor. Using a sharp carbide blade it will trim your cases to length, deburr, and cut both inside and outside chamfers — all in one pass. That’s pretty impressive for a $110.00 tool that fits in the palm of your hand.

Product Features
1. Fully adjustable for cartridge length (and depth of chamfer).
2. Carbide blade cuts a 15° inside case mouth chamfer and 45° outside chamfer.
3. Case holder supported by sealed ball bearing raceway.
4. Tool includes removable, transparent plastic chip guard.
5. Tool can work in any orientation (vertical, horizontal, or any angle).

The Giraud Tri-Way Trimmer is designed to be powered by a portable hand drill, drill press, or other dedicated rotating power source. The tool indexes off the shoulder of your cases, but the blade adjusts so that cartridge overall length (COAL) can be controlled with precision. Constructed out of 6061-T6 aluminum and 303 stainless steel, the Tri Way tool should last a lifetime. Note: This tool is not universal. The Tri Way is dedicated to a single cartridge and “related” cartridges with similar body dimensions. Thus you need a specific tool for each cartridge family. For example, the .308 Win tool will also trim .243 Win, .260 Rem, and 7mm-08.

Cartridge Sizes Available for Giraud Tri Way Trimmer:
.223 Remington (Also trims .17 Remington, .204 Ruger, .222 Remington, .222 Remington Magnum)
7.62 x 39mm (Russian)
.300 Blackout (Also trims .17 Rem Fireball, .20 Vartarg, .221 Fireball)
.308 Winchester (Also trims .243 Winchester, .260 Remington, 7mm-08)
.30-06 Springfield (Also trims .25-06, .270 Winchester, .280 Remington)
.300 Winchester Mag (Also trims ​Also trims .264 Winchester Magnum, 7mm Remington Magnum, .308 Norma Magnum)

Power Trimming Technology Saves Time
Trimming and chamfering brass are tasks hand-loaders grow to hate. Those chores are time-consuming and tiresome. Thankfully there are faster, better alternatives to manual trimming/chamfering. In this article, Forum member Erik Cortina shows how to use the Giraud tool which trims and chamfers in one operation. Erik has his own YouTube Channel dedicated to precision reloading and accurizing. Here we feature Erik’s video about the “mother of all brass trimmers”, the Giraud powered case trimmer. Erik says: “If you do volume reloading… this is the only trimmer to get. It not only trims to length but it also chamfers your case mouth inside and out.” In his video, Erik offers some very clever and useful tips that will help you get the most from your Giraud.

This is a manufacturer’s photo showing an older model.

The Giraud trimmer is very precise. When set up correctly, it can trim brass with amazing consistency. In the video, Erik trims five pieces of brass in 15 seconds (6:32 mark). He then measures all five with precision calipers (7:00-8:08). All lengths are exact within .0005 (half a thousandth). Erik notes that the Giraud trimmer indexes off the case shoulder. As long as you have fire-formed brass with consistent base-to-shoulder dimensions, you should get very consistent trim lengths.

The secret to the system is a 3-way cutting head. This cutter can be swapped in and out in a couple minutes with wrenches provided with the kit. Erik has three different heads; one each for 6.5mm, 7mm, and .30 caliber. The video shows how to adjust the cutting heads to match caliber diameter (and to get the desired amount of inside/outside chamfer).

To trim and chamfer cases, you simply insert them nose-first into the cartridge-specific case-holder. Erik offers a smart tip — He uses a die locking ring to position the cartridge holder (3:15). This can be locked in place. Erik says die locking rings work much better than the hex-nuts provided by Giraud (with the hex-nut, one must re-set cut length each time you change case-holders.)

The Giraud can be used in either horizontal or vertical modes. Erik prefers to have the trimmer aligned vertically, allowing him to push cases down on the trimmer head. But the trimming unit has twin sets of rubber feet, allowing horizontal or vertical orientation.

Improved Case-Holder Made with Chamber Reamer:
For his .284 Shehane, Erik had to create his own case-holder (Giraud does not make one for that wildcat cartridge). Erik used his chamber reamer. To his surprise, Erik found that the brass was easier to trim in the custom case holder (compared to the Giraud-made spring-loaded holders). With a perfect fit, trimming and case extraction went more smoothly and the process was easier on his hands. (See 9:00-10:00). Based on Erik’s experience, you may want to create your own custom case-holder.

Trim Bullet Meplats Also
With a special bullet-holder fitting and meplat cutter head, the Giraud power trimmer can be used to trim bullet meplats. Trimming meplats can help make the Ballistic Coefficents of a batch of bullets more consistent. Uniforming meplats is also often done as a first step in the process of “tipping” bullets to improve BC.

At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.

1. Graf & Sons — Berger Bullets In Stock

⏺ High quality bullets have been hard to find; get these Bergers while you can

Components have been tough to find these days, particularly premium products such as Berger bullets. Head over to Grafs.com where they have a really great supply of Berger bullets in many popular calibers and bullet weights. As always, supplies are limited so don’t wait if you’re in need of bullets.

2. Sportsman’s WHSE — Ruger American, 6.5 Creedmoor, $589.99

⏺ Ruger reliability, popular chambering, great camo finish

Here’s a nice 6.5 Creedmoor hunting rifle with a superb camo finish. This Ruger American Go Wild Camo/Bronze Bolt Action Rifle has a coated 22″ barrel chambered for the very popular 6.5 Creedmoor cartridge. It features a Go Wild Camo stock with a Bronze Cerakote barrel finish. There is also a Ruger marksman adjustable trigger all making for a solid hunting rifle for an attractive $589.99 price.

3. Amazon — Lyman Turbo Sonic Case Cleaner, $106.24

⏺ High quality ultrasonic cleaning machine at very good price

Looking for a different way to clean your brass that doesn’t involve dust or loud noises? Check out the Lyman Turbo Sonic Case Cleaner for $106.24. This unit features a heated tank for cleaning of case and primer pockets. The ultrasonic cavitation lifts and dissolves carbon, dirt and any residue left on fired cases. Not only can you clean your brass, but these units are great for other items like jewelry and silverware.

4. Precision Reloading — Wheeler AR Armorers Kit, $128.99

⏺ Great $128.99 Deal for big AR tool kit — sells elsewhere for $242.99!

ARs require a lot of maintenance. And you need some specialized tools to assemble an AR-15 properly — that’s important for guys building their own lowers and uppers. The Wheeler Engineering Delta Series Ultra Armorers Kit includes pretty much all the tools you need to keep an AR15 running well including: AR combo tool, Torque wrench, Strap Wrench and Delta Ring Tool. In addition the kit includes an Armorer’s Vise, Vise Block Clamp, and Armorer’s Bench Block. Supplied in a handy carry case, the Ultra Armorer’s Kit is now just $128.99 at PrecisionReloading.com. This exact same kit is $242.99 at MidwayUSA.

5. Amazon — Frankford Universal Case Trimmer, $79.99

⏺ Smart system fits drills and trims nearly all popular rifle case types

Here is a good option for trimming cases, if you shoot many different cartridge types. Frankford Arsenal Universal Precision Case Trimmer handled most popular cartridges from .17 Rem all the way up to .460 Weatherby. Just choose the right collet then attached the unit to the end of your power drill for fast, easy trimming. The built-in depth micrometer allows for fast trim-length adjustments, and the brass-shaving ejection port ensures a clean trim. The universal collet system indexes on case shoulders for precise and consistent trimming. This trimming system works with just about any 1/2″ power drill.

6. Bullet Central — Hart Barrels Sale

⏺ High quality barrels in stock — no extended wait

Are you putting together a custom rifle but can’t find barrels in stock anywhere? Head over to Bullet Central for a major Hart barrels sale. You can save $20 on every barrel, plus avoid long wait times typically required for a high-quality barrel. A variety of contours are available in popular 6mm and 6.5mm bore sizes, with 1:7″ and 1:8″ twists, all six-grooves.

7. 5.11 Tactical — 20% OFF Everything

⏺ Big Discount on very high quality outdoor clothing and gear

You need good gear to have a successful day at the range or a successful hunt. That means more than have the right guns and ammo — you also need good clothing, packs, and footwear. Here’s a good way to get outfitted properly without breaking the bank.

Right now at 5.11 Tactical you’ll find some of the finest shooting pants, bags, boot, socks and more, all at 20% OFF Savings. This 5.11 20% Off Sale runs through Tuesday, February 15, 2021 at 11:59 pm.

8. Amazon — IRON JIA’S Waterproof Rifle Case, $42.99

⏺ Great rifle protection when it rains or snows; case even floats

There’s nothing worse than being out in the field or at a big match and having it start raining. One way to counteract that is to get a waterproof case like the IRON JIA’S Waterproof Rifle Case. With built in thick foam padding, it protects your rifles from collision damage, also providing buoyancy when it falls in a river or stream. It’s also a great case for those matches where it may or may not rain and you want to ensure your gun stays dry while you’re in the pits.

9. Creedmoor Sports — Radian’s Custom Molded Ear Plugs, $14.45

⏺ Custom-molded ear protection plugs are very comfortable

If you’re tired of ear plugs that don’t fit right or don’t work well then try something new — the Radian’s Custom Molded Ear Plugs. Follow the instructions to mold the materials to creat a perfect, custom fit for YOUR ears. These kits come in various colors. You can also add a Radians lanyard for these custom-molded plugs and a carry case. As with all ear plugs, you can double up with muffs for extra protection. These Radians molded plugs have a 26 dB Noise Reduction Rating — better than most compact muffs.