<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Daily Bulletin &#187; Cut Barrel</title>
	<atom:link href="https://bulletin.accurateshooter.com/tag/cut-barrel/feed/" rel="self" type="application/rss+xml" />
	<link>https://bulletin.accurateshooter.com</link>
	<description>from AccurateShooter.com</description>
	<lastBuildDate>Tue, 17 Nov 2026 06:44:35 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>hourly</sy:updatePeriod>
	<sy:updateFrequency>1</sy:updateFrequency>
	<generator>https://wordpress.org/?v=4.1.26</generator>
	<item>
		<title>Barrel Throat Erosion Pattern Revealed in Sliced Barrel</title>
		<link>https://bulletin.accurateshooter.com/2026/11/barrel-throat-erosion-pattern-revealed-in-sliced-barrel/</link>
		<comments>https://bulletin.accurateshooter.com/2026/11/barrel-throat-erosion-pattern-revealed-in-sliced-barrel/#comments</comments>
		<pubDate>Tue, 17 Nov 2026 06:10:22 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[Bullets, Brass, Ammo]]></category>
		<category><![CDATA[Gear Review]]></category>
		<category><![CDATA[Tech Tip]]></category>
		<category><![CDATA[Barrel throat]]></category>
		<category><![CDATA[Barrel Wear]]></category>
		<category><![CDATA[Cut Barrel]]></category>
		<category><![CDATA[Hart Barrel]]></category>
		<category><![CDATA[Throat Wear Analysis]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=73390</guid>
		<description><![CDATA[So what does a &#8220;worn-out&#8221; barrel really look like? Tom Myers answered that question when he removed a 6.5-284 barrel and cut it down the middle to reveal throat wear. As you can see, there is a gap of about 5mm before the lands begin and you can see how the lands have thinned at [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img align="right" hspace="6" src="https://accurateshooter.net/Blog/barrelcut2x230.jpg" alt="barrel wear throat inspection lands">So what does a &#8220;worn-out&#8221; barrel really look like? Tom Myers answered that question when he removed a 6.5-284 barrel and cut it down the middle to reveal throat wear. As you can see, there is a gap of about 5mm before the lands begin and you can see how the lands have thinned at the ends. (Note: even in a new barrel, there would be a section of freebore, so not all the 5mm gap represents wear.) There is actually just about 2mm of lands worn away. Tom notes: &#8220;Since I started out, I&#8217;ve chased the lands, moving out the seating depth .086&#8243; (2.18 mm). I always seat to touch. My final touch dimension was 2.440&#8243; with a Stoney Point .26 cal collet.&#8221;</p>
<p>Except for the 2mm of wear, the rifling otherwise looks decent, suggesting that setting back and rechambering this barrel could extend its useful life. Tom reports: &#8220;This was something I just thought I&#8217;d share if anyone was interested. I recently had to re-barrel my favorite prone rifle after its scores at 1,000 started to slip. I only ever shot Sierra 142gr MatchKings with VV N165 out of this barrel. It is a Hart and of course is button-rifled. I documented every round through the gun and got 2,300 over four years. Since I have the facilities, I used wire EDM (Electro Discharge Machining) to section the shot-out barrel in half. It was in amazingly good shape upon close inspection.&#8221;</p>
<p><img src="https://accurateshooter.net/Blog/barrelcutx312.jpg"></p>
<p>Tom could have had this barrel set back, but he observed, &#8220;Lately I have had to increase powder charge to maintain 2,950 fps muzzle velocity. So to set it back would have only increased that problem. [And] I had a brand new 30&#8243; Krieger all ready to screw on. I figured it was unlikely I&#8217;d get another full season on the old barrel, so I took it off.&#8221;</p>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/11/barrel-throat-erosion-pattern-revealed-in-sliced-barrel/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
	</channel>
</rss>
