Our friend Gavin Gear of UltimateReloader.com got his hands on Hornady’s all-new, pyramid-style Lock-N-Load Iron reloading press. This single-stage press features a unique, open-front design that makes it easier to place and remove cases during reloading processes. The compact footprint of this Iron Press also allows for a variety of placement options.

This video shows the new open-front Hornady Iron Press:

Gavin installed the Iron Press on his bench which features horizontal metal channels (for placement flexibility). Gavin reports: “The arrival of this press is great in its timing. I’m just about to move from progressive loading of 6.5 Creedmoor (for the Ruger Precision Rifle) to single-stage precision reloading. This will be the perfect press for that task! Based on the feedback and questions I’ve gotten recently, I’ll compare the consistency between progressive presses and single-stage presses.”

To raise the Iron Press higher, Gavin used an Ultramount from Inline Fabrication: “I was hoping to make slight modifications to the Ultramount in order to adapt it for use with my Ultimate Reloader bench system, and that worked out just fine! Here’s a picture of the Ultramount bolted down: I can easily slide it side to side to make room for other items on my bench.” NOTE: After taking the pictures shown here, Gavin rotated the Ultramount 180 degrees. This moved the whole press forward (towards the operator), providing more bench clearance for the Iron Press linkage and handle.

READ FULL IRON PRESS ARTICLE on UltimateReloader.com

Hornady has introduced an innovative new single-stage press with some very impressive features. The new-for-2016 Hornady Iron Press™ features a super-strong, pyramid-style cast-iron frame with an open front. A very clever optional “automatic” priming system shuttles primers from a vertical tube in the back to the shell-holder in the front. We’ve never really seen anything quite like this before. You really should watch the video — it shows the patented auto-priming system in action. This system appears to be a very smart piece of engineering — good job Hornady.

Watch this Video to See Gravity-Fed Shuttle Priming System (00:45, 01:00):

The broad top of the beefy (26-lb.) Iron Press can hold case prep tools (such as chamfer tool and case-neck brush) and/or a box for bullets or brass. NOTE: This is NOT a turret press — you can only use one die at a time. However, Hornady offers an accessory “Die Caddy” (sold separately) that can hold up to three (3) more dies. That way you can quickly switch from a sizing die to a seater die (or vice-versa). What Hornady calls the “Accessory Mounting Deck” gives quick access to items such as trays for bullets or cases, chamfer and deburr tools, case neck brushes, primer pocket cleaners and other accessories. The Iron Press comes with the Lock-N-Load® bushing system which allows for rapid die changes.

Optional Automatic Priming System
The optional auto-priming system is a real selling point for this new press we think. When you move the press handle rearwards, a horizontal bar toggles back to pick up a primer from the column in the rear of the press. Then this same bar move forwards to place the fresh primer in the center of the shell-holder. Hornady explains: “The available gravity-fed Automatic Priming System (sold separately or with the Lock-N-Load® Iron Press™ Reloading Kit), combined with the Accessory Mounting Deck, increases reloading efficiency by allowing more processes to occur simultaneously. The Iron Press™ is the first of its kind to allow the ability to deprime, pause, and remove the case to chamfer & deburr … then replace and prime.” Do watch the video to see the priming system in action.