Look carefully at the photo above. That stylish black rear bag doesn’t look anything like an Edgewood or Protektor — it’s a Lenzi bag from Italy. The front Bag-holder on the SEB Neo Rest is also a Lenzi product.

Lenzi Rear Sand Bag
Pat Reagin of PMA Tool offers a really superb rear bag that comes from Italy. Pat tells us: “We are now carrying rear bags made by Italian benchrester Alberto Lenzi. Made in Italy, these Lenzi bags are AWESOME! They are available for short range and one that is slightly taller for long range.” The Lenzi rear bags feature a big, 8″x6″ footprint with a thick, slightly concave base that sits very flat on the bench top. Lenzi bags are very stable with a reassuring “dead” feel on the bench. Guys who have tried this bag really like it. Pat says: “I can’t explain it, but the bag seems to absorb energy/recoil better than other bags — the gun tracks a little better and I get back on target really well.” CLICK HERE for more information: Lenzi Long Range Rear Bag | Lenzi Standard Rear Bag.

– Black leather with Cordura at stock contact points with blue stitching.
– 1/2″ flat between medium ears.
– Heavy 8″x6″ base with built-in “donut”.
– Weight about 15.5 lbs filled with heavy sand in bottom & white sand in ears.
– Bags offered with Nylon Ear Covering OR 3M Slick Ear Fabric.

Lenzi Replacement Top for SEB NEO Front Rest
A common complaint about the SEB NEO rest is the rest top, specifically the three-piece bag. This rest top made by Alberto Lenzi addresses the issue by replacing the entire rest top. The rest top features a more conventional design and includes a traditional style front bag that conforms to IBS and NBRSA rules.

The Lenzi Replacement SEB Top with Super-Slick Bag is $275.95, while the bag alone is $75.95. Choose either a Super-Slick (3M Silver) Front Bag or Lenzi Cordura-style Front Bag. NOTE: Lenzi also makes a replacement Front Bag-holder for Farley Rests

Lenzi bags are sold in the USA by PMA Tool and Bruno Shooters Supply.

Serious reloaders know that PMA Tool makes some of the best specialty reloading tools you can buy. To help folks get the most out of their PMA products, the company offers “how-to” videos. One such video features PMA’s great Micro-Adjust Case Trimmer. PMA owner Pat Reagin tells us: “We’ve had quite of bit of interest in the case trimmer, but a lot of guys want to see it in action. So we’ve created an intro video that shows how to adjust and use the trimmer in various modes.”

Watch Micro-Adjust Case Trimmer Video

The PMA Micro-Adjust Case trimmer indexes off the shoulder but it also provides precise control over neck length. You aren’t limited to a built-in, neck-length setting like some other shoulder-indexed trimmers. The PMA Micro-Adjust Trimming tool currently sells for $129.95 including one cartridge insert. The inserts, which can be purchased for $13.95 separately, can often work for a multiple cartridge types within the same family. For example, you can use the same insert for both .243 Win and .260 Rem. There is another insert that works with both 7mm-08 and .308 Win.

PMA Micro-Adjust Case Trimmer Features:

• Indexes off shoulder for easy, consistent trim length.
• Cases captured in no-scratch, Delrin™ inserts.
• Fully rotating head with bearing for smooth operation and clean, square cuts.
• Sharp carbide cutter for quick, smooth cuts with minimal burr.
• Spring loaded head allows complete control of rate of feed.

How to use the PMA Micro-Adjust Case Trimmer
The trimmer indexes case off the case shoulder through the use of interchangeable Delrin™ inserts which capture the shoulder and neck of the case. This insert is contained in a spring-loaded tool head that rides on a linear bearing. The Micro-Adjust Trimmer can be used in three ways.

First, you can secure the case in a PMA caseholder chucked in a power drill, drill press, or lathe. You hold the trimming tool with your hand and feed in the spinning case. (This method is handy because if you leave the case in the holder, after you have trimmed to length, you can switch tools and chamfer the case-mouth using the same power source).

In the second method, the trimmer’s adjustment knob is removed (after locking the setting) and the cutting shaft is chucked in a drill, drill press. or lathe. Using this method, the case itself is held by hand and fed into the cutter. Lastly, the trimmer can be used manually, holding the case in one hand and the trimmer in the other. That’s the slowest method, but it works if you do not have power tools handy.

The folks at PMA Tool are offering this special savings as a Holiday “thank you” to AccurateShooter Forum members and regular readers. Pat Reagin of PMA Tool explains: “A large share of our customers are AccurateShooter.com Fans and Forum members. You folks support us, so we want to give something special back to you this holiday season.”

To get 10% off PMA-brand products, enter the Code “AccuratePMA” during the check-out process when you’re shopping on the PMA Tool webstore, www.PMATool.com. NOTE: This special Promo applies to PMA-branded products only — it does not apply to third-party-brand products that may be sold on the PMA website.