For today’s Sunday GunDay story we offer a short history of the legendary .50 BMG cartridge, tips on loading, and some fun photos from FCSA matches in the Western USA.

Fans of Heavy Artillery should visit Fifty Caliber Shooters Association (FCSA) website. There you’ll find range maps, photo collections and animated slide-shows On the FCSA photo gallery page, you’ll find a map. Click on any gray range link to see images from that venue. There are also a series of articles covering FCSA competition along with the “care and feeding” of the big 50-caliber rifles.

About the .50 BMG Cartridge

The .50 Browning Machine Gun (.50 BMG, aka 12.7×99mm NATO or 50 Browning) is a cartridge developed for the Browning .50 caliber machine gun in the late 1910s, entering official service in 1921. Under STANAG 4383, it is a standard cartridge for NATO forces as well as many non-NATO countries.

John Browning had the idea for this round during World War I in response to a need for an anti-aircraft weapon, based on a scaled-up .30-06 Springfield design, used in a machine gun based on a scaled-up M1919/M1917 design that Browning had initially developed around 1900. According to the American Rifleman: “The Browning .50 originated in the Great War. American interest in an armor-piercing cartridge was influenced by the marginal French 11 mm design, prompting U.S. Army Ordnance officers to consult Browning. They wanted a heavy projectile at 2700 FPS, but the ammunition did not exist. Browning pondered the situation and, according to his son John, replied, ‘Well, the cartridge sounds pretty good to start. You make up some cartridges and we’ll do some shooting’.”

Are you a died-in-the-wool .50 BMG fan? Got a hankerin’ for heavy artillery? Then visit the FCSA Photo Gallery page. There you’ll find hundreds of photos from Fifty Caliber Shooting Association (FCSA) matches and 50 Cal fun shoots in eleven states plus Australia, Switzerland, and the United Kingdom. To access the photos from the Gallery Page, start by selecting a shooting club and state with the brown buttons. After selecting the location, then click on the colored buttons for the event date.

Photo sets go all the way back to 2002, so you can see the evolution of the hardware over the years. Sample multiple archives to see the differences in terrain from one range to another — from Raton’s alpine setting to the hot, dry Nevada desert. This Gallery is really a treasure-trove of .50-Cal history. Here are a few sample images.

Reloading Powder and Special Tools for .50 BMG

Alliant’s Powder for 50-Caliber Applications
In 2009 Alliant unveiled Reloder 50, a slow-burn-rate powder designed primarily for long-range, .50-caliber rifle shooters. According to Alliant, the burn rate is “a little slower than Winchester 860″ and the powder is showing excellent lot-to-lot consistency. Load density is optimized for the 50 BMG and similar cases. Like Reloder 17, Reloder 50 employs a process which penetrates the kernels with the burn-rate-controlling chemical. This should allow a longer, flatter pressure curve, yielding more velocity than conventional powders can deliver. Alliant says that Reloder 50 offers “superior velocity and the ability to burn cleaner (with less residue)”. Reloder 50 comes in both 1-lb (#150527) and 8-lb (#150528) containers.

Forster and Lyman .50 BMG Trimmers
Big Fifty enthusiasts asked for a dedicated .50 BMG case trimmer, so Forster and Lyman created .50 Cal trimmers specifically for that cartridge. The cutter tip on the Forster .50 BMG Case Trimmer is much sharper than the cutter on the Lyman 50 Cal AccuTrimmer. However, with the Forster tool you will pay more for that superior cutting ability — the Forster .50 BMG trimmer is $125.18 at Precision Reloading compared to $85.21 on Amazon for the Lyman .50 BMG trimmer. Our advice is go ahead and pay the extra money for the Forster — the cutter head is much sharper, and we prefer the Forster’s collet-style case-holder. The Forster gets the job done more quickly, with less effort. NOTE: Grab the Forster while you can — we believe Forster has halted production (but it is still in stock at Precision Reloading and some other vendors).

Giraud .50 BMG Case/Bullet Comparator
Giraud Tool makes a comparator for 50-Cal cartridges. The double-ended comparator is quite versatile. In one orientation you can measure base-to-ogive bullet length and also measure cartridge OAL from rim to bullet ogive. When reversed, you can use the comparator to measure cartridge headspace. The $33.00 Giraud .50 BMG Comparator gauge is constructed of 303 stainless and fits most any vernier, dial, or digital caliper. CLICK HERE for more info.

Fans of Heavy Artillery should visit Fifty Caliber Shooters Association (FCSA) website. There you’ll find range maps, photo collections and animated slide-shows On the FCSA photo gallery page, you’ll find a map. Click on any gray range link to see images from that venue. There are also a series of articles covering FCSA competition along with the “care and feeding” of the big 50-caliber rifles.

For today’s Sunday GunDay feature we offer a short history of the legendary .50 BMG cartridge, along with some fun photos from FCSA matches in the Western USA.

About the .50 BMG Cartridge

The .50 Browning Machine Gun (.50 BMG, aka 12.7×99mm NATO or 50 Browning) is a cartridge developed for the Browning .50 caliber machine gun in the late 1910s, entering official service in 1921. Under STANAG 4383, it is a standard cartridge for NATO forces as well as many non-NATO countries.

John Browning had the idea for this round during World War I in response to a need for an anti-aircraft weapon, based on a scaled-up .30-06 Springfield design, used in a machine gun based on a scaled-up M1919/M1917 design that Browning had initially developed around 1900. According to the American Rifleman: “The Browning .50 originated in the Great War. American interest in an armor-piercing cartridge was influenced by the marginal French 11 mm design, prompting U.S. Army Ordnance officers to consult Browning. They wanted a heavy projectile at 2700 FPS, but the ammunition did not exist. Browning pondered the situation and, according to his son John, replied, ‘Well, the cartridge sounds pretty good to start. You make up some cartridges and we’ll do some shooting’.”

Are you a died-in-the-wool .50 BMG fan? Got a hankerin’ for heavy artillery? Then visit the FCSA Photo Gallery page. There you’ll find hundreds of photos from Fifty Caliber Shooting Association (FCSA) matches and 50 Cal fun shoots in eleven states plus Australia, Switzerland, and the United Kingdom. To access the photos from the Gallery Page, start by selecting a state/country and then click on the colored buttons for the event date (e.g. 2015-04).

Photo sets go all the way back to 2002, so you can see the evolution of the hardware over the years. Sample multiple archives to see the differences in terrain from one range to another — from Raton’s alpine setting to the hot, dry Nevada desert. This Gallery is really a treasure-trove of .50-Cal history. Here are a few sample images.

Reloading Powder and Special Tools for .50 BMG

Alliant’s Powder for 50-Caliber Applications
In 2009 Alliant unveiled Reloder 50, a slow-burn-rate powder designed primarily for long-range, .50-caliber rifle shooters. According to Alliant, the burn rate is “a little slower than Winchester 860″ and the powder is showing excellent lot-to-lot consistency. Load density is optimized for the 50 BMG and similar cases. Like Reloder 17, Reloder 50 employs a process which penetrates the kernels with the burn-rate-controlling chemical. This should allow a longer, flatter pressure curve, yielding more velocity than conventional powders can deliver. Alliant says that Reloder 50 offers “superior velocity and the ability to burn cleaner (with less residue)”. Reloder 50 comes in both 1-lb (#150527) and 8-lb (#150528) containers.

Forster and Lyman .50 BMG Trimmers
Big Fifty enthusiasts asked for a dedicated .50 BMG case trimmer, so Forster and Lyman created .50 Cal trimmers specifically for that cartridge. Forster’s cutter tip on its .50 BMG Case Trimmer is much sharper than the cutter on the Lyman 50 Cal AccuTrimmer. However, with the Forster tool you will pay more for that superior cutting ability — the Forster .50 BMG trimmer is $95.53 at Midsouth compared to $75.09 at Midsouth for the Lyman .50 BMG trimmer. Go head and pay the extra money for the Forster — the cutter head is much sharper, and we prefer the Forster’s collet-style case-holder. Bottom line — the Forster gets the job done more quickly, with less effort.

Giraud .50 BMG Case/Bullet Comparator
Giraud Tool makes a comparator for 50-Cal cartridges. The double-ended comparator is quite versatile. In one orientation you can measure base-to-ogive bullet length and also measure cartridge OAL from rim to bullet ogive. When reversed, you can use the comparator to measure cartridge headspace. The $33.00 Giraud .50 BMG Comparator gauge is constructed of 303 stainless and fits most any vernier, dial, or digital caliper. CLICK HERE for more info.

U.S. F-Class Nationals Start Sunday, September 15th!
The U.S. Mid-Range and Long Range Nationals kick off September 15th at the NRA Whittington Center near Raton, New Mexico. Here are some tips that can help F-TR and F-Open shooters aim more precisely, and achieve higher scores. F-Class ace Monte Milanuk reviews reticle choices and strategies for holding off.

In our Shooters Forum, one newcomer wanted some advice on selecting a reticle for F-Class optics. He wondered about the advantage of Front (first) Focal Plane (FFP) vs. Second Focal Plane scopes and also wondered if one type of reticle was better for “holding off” than others.

In responding to this question, Forum regular Monte Milanuk provided an excellent summary of aiming methods used in F-Class. For anyone shooting score targets, Monte’s post is worth reading:

Aiming Methods for F-Class (and Long-Range) Shooting — by Monte Milanuk

F-Class is a known-distance event, with targets of known dimensions that have markings (rings) of known sizes. Any ‘holding off’ can be done using the target face itself. Most ‘benefits’ of Front (first) focal plain (FFP) optics are null and void here — they work great on two-way ranges where ‘minute of man’ is the defining criteria — but how many FFP scopes do you know of in the 30-40X magnification range? Very, very few, because what people who buy high-magnification scopes want is something that allows them to hold finer on the target, and see more detail of the target, not something where the reticle covers the same amount of real estate and appears ‘coarser’ in view against the target, while getting almost too fine to see at lower powers.

Whether a person clicks or holds off is largely personal preference. Some people might decline to adjust their scope as long as they can hold off somewhere on the target. Some of that may stem from the unfortunate effect of scopes being mechanical objects which sometimes don’t work entirely as advertised (i.e. one or two clicks being more or less than anticipated). Me personally, if I get outside 1-1.5 MOA from center, I usually correct accordingly. I also shoot on a range where wind corrections are often in revolutions, not clicks or minutes, between shots.

Some shooters do a modified form of ‘chase the spotter’ — i.e. Take a swag at the wind, dial it on, aim center and shoot. Spotter comes up mid-ring 10 at 4 o’clock… so for the next shot aim mid-ring 10 at 10 o’clock and shoot. This should come up a center X (in theory). Adjust process as necessary to take into account for varying wind speeds and direction.

Others use a plot sheet that is a scaled representation of the target face, complete with a grid overlaid on it that matches the increments of their optics — usually in MOA. Take your Swag at the wind, dial it on, hold center and shoot. Shot comes up a 10 o’clock ‘8’… plot the shot on the sheet, look at the grid and take your corrections from that and dial the scope accordingly. This process should put you in the center (or pretty close), assuming that you didn’t completely ignore the wind in the mean time. Once in the center, hold off and shoot and plot, and if you see a ‘group’ forming (say low right in the 10 ring) either continue to hold high and left or apply the needed corrections to bring your group into the x-ring.

Just holding is generally faster, and allows the shooter to shoot fast and (hopefully) stay ahead of the wind. Plotting is more methodical and may save your bacon if the wind completely changes on you… plotting provides a good reference for dialing back the other way while staying in the middle of the target. — YMMV, Monte

After Norm Harrold won the 2018 F-Open National Championship in Raton, New Mexico, setting a new 1000-yard National Record in the process, many of our Forum members wanted to see Norm’s championship-winning rifle, and learn more about Norm’s experience at the Nationals. Read on for coverage of Norm’s equipment and .284 Shehane ammo. Scroll down and you’ll find a detailed video showing how McMillan builds the advanced Kestros ZR stocks, like the one Norm used at Raton.

Norm posted: “I made it home from Raton 2018 F-Class Nationals and what an unbelievably amazing week I had. I was blessed enough to bring home a new F-Open 1000-yard record and the National Championship! Our Team McMillan took second in Mid-range and fourth overall in Long Range. I am so thankful and blessed to have this opportunity and to be able to do it with such a stand-up group of competitors and lifelong friends. Thanks to all our sponsors: McMillan Fiberglass Stocks, Nightforce Optics, Kelbly’s [Actions], Bartlein Barrels, and Berger Bullets.”

Gun and Load: Norm’s F-Open rig features a McMillan Kestros ZR stock and Bartlein barrel chambered for the .284 Shehane, which has a bit more case capacity than a standard .284 Winchester. Norm loaded Berger 184gr 7mm bullets in Lapua brass. Norm revealed his load in an Erik Cortina YouTube Video. Fellow shooter Erik Cortina joked — “the minute this video goes live, the 184s will be hard to find”. Norm says “Stock up guys — they shoot good!”

Here Norm Harrold shows his shooting form. Note how low the McMillan Kestros ZR forearm sits on Norm’s SEB NEO front rest. Norm also uses a large footprint rear bag for enhanced stability.

Harrold Shoots 200-22X to Smash 1000-Yard F-Open Record
On a rainy day at Raton, Norm shot brilliantly to set a new F-Open National Record: 200-22X at 1000 yards. (The previous record was 200-17X.) How could he get 22 Xs for a 20-shot string? Under NRA rules, if you shoot all Xs for the full string, you are allowed to keep shooting for as long as you can put shots in the X-Ring. Norm almost missed the chance to extend his X-Count. After his 20th shot, Norm recalled, “I said ‘I’m done, give me my target’, but … my shooting partner said ‘No! Keep shooting!’” So Norm did, drilling two more Xs to set the new National Record.

In this video, Kelly McMillan explains the design features and construction methods for the Kestros ZR, a fiberglass Kestros with aluminum extension rails in the front. Kelly explains “how and why we made the stock the way we did” and he shows how to retro-fit standard Kestros stocks with the new front rails. On the ZR the rails are anchored to a reinforced area for extra rigidity. In addition, the cantilevered rails are milled to be perfectly parallel. If you shoot F-Class we strongly recommend you watch this video.

Kelly McMillan showed us the prototype Kestros ZR at the 2018 Berger Southwest Nationals.

Retired Army Special Forces Sgt. Maj. Walter Wilkinson won two of the four individual 1,000-yard Score titles — for Light Gun and Hunter Classes — at the recent Fifty Caliber Shooters’ Association (FCSA) 2018 World Championships. In addition to his two individual score titles*, Wilkinson was also a member of the winning 4-shooter team.

The FCSA World Championships were held July 5-7, 2018 at the NRA Whittington Center near Raton, New Mexico. There were shooters from Australia, Great Britain, Spain and the USA in attendance. The FCSA 1000-yard matches have four classes: Light Gun, Heavy Gun, Unlimited, and Hunter. In the first three classes, the rifles are normally shot from a machine rest off the bench. Hunter Class requires the shooter to fire from the ground with a bipod. And that’s how Wilkinson shot all his relays…

Remarkably, Wilkinson, who shot his near-“box stock” Steyr HS .50 equipped with factory bipod from the ground in the prone position, posted the FCSA Championships’ highest score, beating out shooters in the Light Gun, Heavy Gun, and even Unlimited Classes.

Beating the Benchresters — While Shooting Prone from Bipod
Wilkinson, a Gunsite instructor from Edgewood, NM, shot a two-day total of 290-10X for the Hunter Score, and his Light Gun Score total of 291-7X was the highest of any shooter in any class — most of whom were firing custom-built rifles from mechanical rests atop concrete benches. Wilkinson also placed fourth overall in the 2-Gun Aggregate, which factors both scores and average group sizes from both classes. Wilksonson’s score wins marks his third FCSA victory in the Hunter Class with his Steyr HS .50 since his first win in 2012, and this year he notched his first Light Gun Score World Title.

The Wicked Whittington Range at Raton
Nestled at the base of the Sangre de Cristo Mountains, the Whittington Center’s 1,000-yard range has notoriously tricky winds, especially in the afternoons. On the first day, Wilkinson shot on the afternoon relays. As usual, switching and swirling winds proved to be a formidable foe for all shooters. Wind coming from behind the shooters was switching from 4 O’clock to 8 O’clock and back again, often changing within seconds. Wilkinson was able to very quickly make wind judgments and adjust his hold accordingly. “I couldn’t do anything wrong,” Wilkinson said. “It was like every time the wind changed, I knew exactly where to hold, and the bullets just kept going where I wanted them to.

Photo courtesy Brett Berger.

Holding Off Right and Left for the Cycling Wind
“The highlights of the day were the last two strings of fire in Hunter Class during Relay 4″, Wilkinson explained. “I shot a 50-2X with a 9.8-inch group and a 49-2X with a 7.9-inch group. The Ten-Ring is right at 1.15 MOA, and when you keep them all in that, it says something about your rifle and your load. During both of those two strings, I changed from holding on the right side of the target to the left side during the string.”

Wilkinson’s .50 Delivered Quarter-MOA Groups During Load Testing
Wilkonson’ Steyr .50-Cal has always been an accurate rig. Back in 2012, when Wilkinson developing loads, the big rig showed outstanding accuracy: “As I was working up a load for the HS.50, I shot groups that amazed me. I was getting groups of 0.214 MOA at 220 yards, and I didn’t know what to think. All the bullets were going in the same hole, and it was like ‘Wow, I’ve really got a rifle that can shoot here’. That stunned Wilkinson: “With my [military] experience with the performance of the same .50 BMG cartridge overseas, I didn’t expect that kind of accuracy out of it.”

Cost of Big-Bore Shooting
Is owning and shooting a 50 BMG caliber rifle expensive? Relatively speaking yes, but one must put it into perspective. Rifles may run from $2500 to $6000, maybe even more for a top of the line custom rifle. (Current MSRP for the Steyr H2 .50 is $5910.00). A premium long-range scope will set you back $1500 to $3000. And while excellent commercial ammo is available, it runs $3 to $5 per round! Most serious shooters start reloading for the rifle as soon as practical, not only for the economics of reloading but also for the ability to fine tune custom ammo for their specific rifle. It’s a very rare match that is won shooting commercial ammo.

*Wilkinson’s FCSA trophies state “Hunter Class Score World Champion” and “Light Class Score World Champion”. NOTE the FCSA also recognizes, for each class, a World Champion for Group size, AND a World Champion for combined Group and Score (Aggregate). Plus there are Championship Trophies for Two-Gun. This gets a little confusing. With other Disciplines there is only ONE World Champion per class, generally the competitor who has the best combination of Group Size and Score.

The 2018 King of 2 Miles (KO2M) event took place July 2-4 in Raton, New Mexico. Conditions were very challenging this year, yet three shooters managed to hit the most distant 3,525-yard plate at least once in five shots, a remarkable accomplishment. At that range the bullet was in flight about six seconds.

Robert Brantley of Team Manners Composite Stocks is the new King of 2 Miles. Congrats to Robert and his team-mates. Robert amassed 85178 points, finishing over 20,000 points ahead of runner-up John Buhay. Paul Phillips of Team Applied Ballistics finished third. FULL K02M 2018 RESULTS HERE.

Here’s Robert Brantley after his superb qualifying performance, which set a new 2018 King of 2 Miles qualifying round record. Going perfect on targets 1, 2, and 3, Robert missed just one shot on Target 4 of the qualifying phase, amassing 51355 points, a new K02M record.

CLICK HERE for a very complete and thorough KO2M report created by The Precision Rifle Blog (PRB). This excellent PRB Report contains complete load and rig specifications for the top five shooters. In addition, the PRB Report includes a full run-down on this year’s event.

Though the trigger pullers get the glory, this is really a three-man game. One guy shoots, a second team member spots for hits and calls corrections, and a third watches mirage and makes wind calls.

Multi-Day, Multi-Distance Competition with Farthest Target at 3525 Yards
The K02M Competition runs in stages, with the distances getting farther with each round. After five shots on target 1 at 1547 yards, there are then three shots per target for the remaining three parts of the Qualifying round. Then, in the three-target Finals phase, there are with five shots per target. You get more points for earlier hits in each string, and there are no sighters during the match. The event started with a tough Cold Bore Challenge — a single-shot at 1689 yards, just shy of one mile. Only three out of 62 competitors made that cold-bore mile shot on a 16″ plate, about 1 MOA at that distance. After that there are two rounds with the targets arrayed as follows.

Big Bore Rifles with High-BC Bullets
This year saw the continued evolution of equipment. Top shooter Brantley shot a .416 Barrett with 500gr Cutting Edge bullets. Robert’s massive 44-lb rifle featured a 39″ K&P barrel, McMillan action, and a Manners LRT (Long Range Tactical) stock designed expressly for this KO2M competition.

Second Place John Buhay shot an improved version of the .375 CheyTac, with 353gr Lehigh Defense Match Solid bullets. Buhay’s 37.6-lb rig bosted a BAT action and 36″ Krieger barrel along with a fairly conventional McMillan MBR 1K benchrest stock. Mark King built the rifle.

Third Place Paul Phillips campaigned a .416 Barrett with 550gr Cutting Edge Lazer bullets. Paul’s 42-lb rig featured a BAT action and McMillan Beast 1 stock. Shown below is the latest rifle of 2017 K02M champ Derek Rodgers, a .416 Barrett also in a McMillan Beast. Derek spotted for Phillips in the match.

Optics Options
There was quite a variety of scopes used by Top K02M competitors, evidence that a number of manufacturers now offer optics with abundant elevation and the ability to stand up to heavy recoil. Here are the optics choices for the Top Five Shooters:

1. Bushnell XRS II 4.5-30x50mm with G3 reticle in Badger UniMount
2. Nightforce ATACR 5-25x56mm with MOAR reticle, with ERA-TAC Inclined Mount
3. Nightforce ATACR 5-25×56mm, with Charlie TARAC external Prism System for Elevation
4. Leupold Mark 5HD 5-25×56mm, in Spuhr mount with Charlie TARAC
5. Burris XTR II 5-25x50mm in Barrett rings

Notably, two of the top five used the Charlie TARAC prism system. This provides a ton of extra elevation by essentially shifting the view seen through the scope. The unit fits to the scope’s front objective.

Fans of Heavy Artillery should head over to the updated and enhanced Fifty Caliber Shooters Association (FCSA) Image Gallery website. There you’ll find photo collections and animated slide-shows (there also a separate Video Collection) On the photo gallery page, you’ll find a map. Click on any gray range link to see images from that venue. There are also a series of articles covering FCSA competition along with the “care and feeding” of the big 50-caliber rifles.

The FCSA will host its 1000/600 Yard World Championship July 5 through 7, 2018 at the Whittington Center in Raton, New Mexico. This will follow the 2018 King of 2 Miles Competition at Raton, which runs July 2-4, 2018. CLICK HERE to Register for FCSA 2018 Championship.

About the FCSA
Founded in 1985, the FCSA is an international organization with members in 22 countries. Headquartered in Monroe, Utah, the FCSA has a membership of approximately 4000. While the FCSA provides a service to military and law enforcement with research and instruction as well as an active liaison in both communities, the primary charter of the FCSA is the promotion of the sporting use of the 50 BMG cartridge and its wildcat derivatives. The FCSA and its members have lead the way in refining .50-caliber cartridges, rifles, and 1000-yard plus shooting know-how. Members enjoy a quarterly magazine, a suppliers directory, a very active website, and access to literally the best repository of 50 BMG information on the planet. If you are interested in Mr. John Browning’s big 50, you should seriously consider joining the FCSA.

Pick your passion — High Power, F-Class, Silhouette, Smallbore, Air Rifle, Pistol, Black Powder. The NRA runs National Championships for all these disciplines and more. Attending a National Championship event is a big commitment, but it’s worth it. You can meet new friends, test your mettle against the nation’s best, and record memories that can last a lifetime.

Mark your calendars boys and girls — here is the complete 2018 NRA National Match schedule. This includes the National High Power Championship, National F-Class Championship, Fullbore (Palma) Championship, and a 15 more major national events. The date and location are included for each listing. Click the link for each championship to go directly to the official NRA championship page for that particular discipline to get more information or to register. To get more information, visit compete.nra.org or send email to: comphelp@nrahq.org.

Intercollegiate Pistol Championships
March 17-20 ― Fort Benning, GA

Intercollegiate Rifle Club Championships
March 23-25 ― Fort Benning, GA

NRA World Action Pistol Championship
May 19-20 ― Hallsville, MO

NRA Bianchi Cup Action Pistol Championship
May 23-25 ― Hallsville, MO

National Muzzle Loading Championship
June 9-17 ― Bloomington, IL

National Air Gun Championship
June 14-19 ― Bloomington, IL

National High Power Rifle Championships
July 5-24 ― Edinburgh, IN

National Precision (Bullseye) Pistol Championships
July 9-13 ― Camp Perry, OH

National Silhouette Smallbore Rifle Championships
July 15-17 ― Raton, NM

National Smallbore Rifle Championships
July 19-30 ― Bristol, IN

National Silhouette High Power Championships
July 19-21 ― Raton, NM

National Silhouette Cowboy Lever Action Rifle Championship
July 24-27 ― Raton, NM

National Silhouette Black Powder Cartridge Rifle Championship
July 30-August 3 ― Raton, NM

Fullbore Prone/Spirit of America National Championship
September 8-14 ― Raton, NM

NRA World Shooting Championship
September 13-15 ― Glengary, WV

National F-Class Championship
September 16-23 ― Raton, NM

National Police Shooting Championship
September 24-26 ― Albuquerque, NM

National Black Powder Target Rifle Championship
October 1-7 ― Raton, NM

The NRA Black Powder Target Rifle Championship will be held August 14-20, 2017 at the Whittington Center in Raton, NM. Top Black Powder Cartridge Rifle (BPCR) shooters from around the country have come to Raton to test their skills during a week-long event with targets set from 200 to 1000 yards. Today through Thursday, mid-range matches continue at 200 to 600 yards. On the firing line you’ll see many handsome, custom-built BPCRs (Sharps, Ballards, Browning High Walls, Rolling Blocks) with exquisite wood, hand-checkering, and color-case-hardened receivers.

The 800-1000 yard Creedmoor matches will be held Friday and Saturday, August 19-20. Interestingly, for safety reasons, there are minimum bullet weight and muzzle velocity requirements for the Creedmoor matches. These BPCR shooters launch some seriously heavy projectiles downrange.

REGISTRATION: Registration will take place at the Eagle’s Nest Building beginning at 13:00 – 17:00 on August 13, and 07:15 – 09:00 August 14 for the Championships. NOTE: The NRA Black Powder Committee and NRAWC has changed the minimum requirements of bullet weight and velocity. There may be a 2% variance in bullet weight or velocity. Numbers in BOLD indicate the 2% variance. Only ammunition which produces these results, or better, and only rifles that have long-range sights will be permitted for use in the Creedmoor Championships. See the BPTR Nationals Ballistic Velocity Chart below for minimum requirements.

ACCOMMODATIONS: There are many motels in the town of Raton, about 10 miles from the Range. In additions, there are accommodations on the grounds of the Whittington Center: 90 beds in Competitors Housing and 100 beds in Log Cabins. These facilities fill up quickly — call the Whittington Center right away at (575) 445-3615 to reserve.

The 2017 King of 2 Miles match has concluded, and we have a new monarch. F-Class Ace Derek Rodgers is the new King of 2 Miles. Shooting with Team Applied Ballistics, Derek delivered a dominant performance, scoring nearly twice as many points as his nearest rival, Ronnie Wright. And Derek was the first KO2M marksman in history to hit the target at the maximum 3368-yard (1.91 mile) distance.

With his McMillan-stocked .375 CheyTac rifle, Derek shot brilliantly from the start. He was perfect — without a miss — at the first three yardages: 1543, 1722, and 1888. He had some misses at 1953 and 2667 yards, but then he out-shot all competitors at 3028 yards, going two for five. No other shooter managed a single hit at 3028 yards. Then it all came down to the big one — the last (and greatest) challenge, the target at 3368 yards (1.91 miles).

This would require superior shooting skills, a masterful wind call (by Emil Praslick), and nerves of steel. Derek tried four shots without success. It looked like the two-mile hit would continue to be an impossible goal. But then, on his fifth and very last shot, Derek did it — he hit the 3368-yard target.

After Derek made the (nearly) two-mile shot, cheers erupted on the firing line — what an achievement! Derek is the first (and only) shooter to make the 3368-yard shot at K02M. Watch him do it in this video:

Derek Rodgers Hits Target at 3368 Yards on his Final Shot:

Derek Rodgers K02M-Winning Hardware and Ammunition

Factory Rifle Finishes in Second Place
With so many full-custom rifles on the firing line, many were surprised to see a factory rifle finishing second overall. Ronnie Wright shot superbly with his stock Barrett M99 chambered in .416 Barrett. Ronnie’s impressive second-place performance proved the effectiveness of the .416 Barrett cartridge (and the build quality of the M99). For ammo, Ronnie used Cutting Edge 472gr MTAC projectiles loaded in Barrett-stamped .416 cases. The powder was Alliant Reloder 50 ignited by CCI #35 50 BMG primers. The rifle had a Barrett factory 32″ barrel fitted with an Accuracy 1st level.

INTERVIEW with DEREK RODGERS:

Q: What do you believe contributed to your success at this match?

Derek: This match was truly a team effort from the entire Applied Ballistics Team. Emil Praslick and Paul Phillips are world class wind-readers and spotters. They have the ability to make decisive decisions and trust that I (as the shooter) will put a bullet on target every time a command is given. We posses a dynamic team background with a lot of history and experience under our belt. Our positive team synergy is hard to find. The addition of vital tools played a huge role in our success. A few of the tools we used were the AB Kestrel and Garmin Foretrex 701 AB Elite to give absolutely crucial and accurate ballistic solutions. The new McMillan ELR Beast stock was stable and the NF ATACR scope is robust and clear. The Bartlein barrel used was top notch! However, one of the most important pieces of the ELR puzzle and the only thing that separates the target is — the bullet. We chose Cutting Edge (CE) bullets due to their high level of precision. These bullets proved to be invaluable in connecting every piece of steel at the KO2M competition. The CE 400gr Lazer Max bullet was selected and was tremendously accurate. This bullet transitioned into a sub-sonic velocity without any loss of precision at ELR distances. Our success would not be possible if the projectile did not fly correctly for 7+ seconds of flight time. CE has outstanding designs and several quality choices to choose from.

Q: How many hours would you say you practiced for this match?

Derek: It is hard to calculate practice time in hours. ELR is a program that we work on every chance we get — day and night for months prior to the event. We have an extremely strong background of team shooting and long range shooting. A lot of time has been invested on and off the range, but does not stop there. The combined range time from other disciplines really helped me to be successful in transitioning from long range to ELR. It really is a compilation of 10 years of trials and tribulations. Some would say, “the Devil is in the details”. Our team tries very hard to not overlook any small detail. Practice and training is always scrutinized for improvements. Our Applied Ballistics team has a love and passion that goes beyond measurable amounts of time. We were fortunate to get together for two days a month prior to the Ko2M event to review our program and practice as a team. Bryan Litz had a plan, and we discovered as a team we had flaws in our program. Each one of us contributed from years of experience on improving our technique until we had a winning solution.

Q: Why did you choose the .375 CheyTac cartridge?

Derek: When I was asked to join the AB Team, I needed to get an ELR rifle built in a short period of time. I was under a very tight time schedule to get the project complete. In an effort to eliminate variables, I decided to keep things standard and as simple as possible. I chose the .375 CheyTac for the ease of getting components. The larger rifles are more difficult to get components quickly and I felt like the .375 CheyTac had enough attributes to be competitive at ELR distances.

The Cutting Edge 400gr bullets are milled from solid copper bar stock on a CNC Swiss-style lathe.

New ELR Hardware and Software on Display at K02M
This marks the second straight year that Team Applied Ballistics has won the K02M event. Last year, Team AB shooter Mitchell Fitzpatrick won the coveted “King of 2 Miles” title (Fitzpatrick finished fourth this year, just off the podium). In the past year, there has been considerable evolution in Extreme Long Range hardware and software, and projectiles are constantly being improved.

Bryan Litz (center) conferring with Team AB members Emil Praslick (L) and Doc Beech (R).

We asked Bryan Litz, founder of Applied Ballistics, to summarize developments in the ELR game. Here are Bryan’s observations:

“Each year the KO2M sees advancements and shooters converging on those tools and processes that have proven effective in prior years. It’s rather apparent, for example, that spotting impacts is a crucial part of success in this match. This was improved by the match directors/organizers placing the targets in very good locations for spotting impacts. We’re seeing less set-ups with adjustable bases, and more with solid/fixed scope mounts. One of the exciting new pieces of equipment is the periscope device made by TACOMHQ (John Baker). This device provides an optical shift to the image which allows you to get more elevation for those long shots. Also, the refinement of fire control (ballistic) solutions has really played a role in getting shooters centered up for their first shots.”

“This tournament highly favors first-round impacts with the scoring system, so the approach of ‘walking the shots on’, isn’t a winning strategy. Those who employed accurate ballistics solvers were able to score more first round hits, and pile up the points. First and second place (at least) were using Applied Ballistics solvers to center their shots. We’re looking forward to even more advancements and making these ELR shots even out to two miles more commonplace in the future thru systematically applying the Science of Accuracy.”

The winning Applied Ballistics Team:

Bonus Video — Interview with David Tubb at KO2M