<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Daily Bulletin &#187; Reloading</title>
	<atom:link href="https://bulletin.accurateshooter.com/tag/reloading/feed/" rel="self" type="application/rss+xml" />
	<link>https://bulletin.accurateshooter.com</link>
	<description>from AccurateShooter.com</description>
	<lastBuildDate>Thu, 19 Nov 2026 19:07:01 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>hourly</sy:updatePeriod>
	<sy:updateFrequency>1</sy:updateFrequency>
	<generator>https://wordpress.org/?v=4.1.26</generator>
	<item>
		<title>For Friday the 13th &#8212; How to Avoid Train Wrecks at Matches</title>
		<link>https://bulletin.accurateshooter.com/2026/11/for-friday-the-13th-how-to-avoid-train-wrecks-at-matches/</link>
		<comments>https://bulletin.accurateshooter.com/2026/11/for-friday-the-13th-how-to-avoid-train-wrecks-at-matches/#comments</comments>
		<pubDate>Fri, 13 Nov 2026 08:22:37 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[- Articles]]></category>
		<category><![CDATA[Competition]]></category>
		<category><![CDATA[Shooting Skills]]></category>
		<category><![CDATA[Bryan Litz]]></category>
		<category><![CDATA[F-Class]]></category>
		<category><![CDATA[Friday 13th]]></category>
		<category><![CDATA[Mental Game]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Train Wrecks]]></category>
		<category><![CDATA[Wind Reading]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=73374</guid>
		<description><![CDATA[Today is Friday the 13th. For those of you who are superstitious — maybe you should avoid climbing ladders, playing the stock market, or using power tools today. When it comes to shooting, there are many things that shooters chalk up to “bad luck”. In fact, most of these instances of “bad fortune” just come [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img src="https://accurateshooter.net/pix/fri13th23.jpg" alt="train wreck Bryan Litz shooting tips ballistics friday 13 13th"></p>
<p>Today is <strong>Friday the 13th</strong>. For those of you who are superstitious — maybe you should avoid climbing ladders, playing the stock market, or using power tools today.</p>
<p>When it comes to shooting, there are many things that shooters chalk up to “bad luck”. In fact, most of these instances of “bad fortune” just come from a failure to anticipate problems. When you have a major, critical problem at a shooting match, i.e. a “train wreck”, this can be the end of your weekend. In this article, Ballistics Guru Bryan Litz talks about “train wrecks” and how to avoid them, even if you are shooting on Friday the 13th. As Bryan told us: “I don’t believe in superstition — we make our own luck!”</p>
<h2>How to Avoid &#8220;Train Wrecks&#8221; In Competition</h2>
<p>In any shooting competition, you must try to avoid major screw-ups that can ruin your day (or your match). In this article, past F-TR National Mid-Range and Long Range Champion Bryan Litz talks about &#8220;Train Wrecks&#8221;, i.e. those big disasters (such as equipment failures) that can ruin a whole match. Bryan illustrates the types of &#8220;train wrecks&#8221; that commonly befall competitors, and he explains how to avoid these &#8220;unmitigated disasters&#8221;.</p>
<blockquote><p><big>Urban Dictionary &#8220;Train Wreck&#8221; Definition: &#8220;<em>A total @#$&#038;! disaster &#8230; the kind that makes you want to shake your head</em>.&#8221;</big></p></blockquote>
<p><img hspace="6" class="alignright" hspace="6" src="http://accurateshooter.net/Blog/wreck07.jpg" alt="train wreck Bryan Litz shooting tips ballistics"><em><strong>Train Wrecks (and How to Avoid Them)</strong></em><br />
<em>by Bryan Litz of </em> <a href="http://appliedballisticsllc.com" target="_blank"><strong>Applied Ballistics LLC</strong></a>.</p>
<p>Success in long range competition depends on many things. Those who aspire to be competitive are usually detail-oriented, and focused on all the small things that might give them an edge. Unfortunately it’s common for shooters lose sight of the big picture &#8212; missing the forest for the trees, so to speak.</p>
<p>Consistency is one of the universal principles of successful shooting. The tournament champion is the shooter with the highest average performance over several days, often times not winning a single match. While you can win tournaments without an isolated stellar performance, <strong>you cannot win tournaments if you have a single train wreck performance</strong>. And this is why it’s important for the detail-oriented shooter to keep an eye out for potential &#8220;big picture&#8221; problems that can derail the train of success!</p>
<p>Train wrecks can be defined differently by shooters of various skill levels and categories. Anything from problems causing a miss, to problems causing a 3/4-MOA shift in wind zero can manifest as a train wreck, depending on the kind of shooting you’re doing.</p>
<p>Below is a list of common <strong>Shooting Match Train Wrecks</strong>, and suggestions for avoiding them.</p>
<p><strong>1. Cross-Firing.</strong> The fastest and most common way to destroy your score (and any hopes of winning a tournament) is to cross-fire. The cure is obviously basic awareness of your target number on each shot, but you can stack the odds in your favor if you’re smart. For sling shooters, establish your Natural Point of Aim (NPA) and monitor that it doesn’t shift during your course of fire. If you’re doing this right, you’ll always come back on your target naturally, without deliberately checking each time. You should be doing this anyway, but avoiding cross-fires is another incentive for monitoring this important fundamental. In F-Class shooting, pay attention to how the rifle recoils, and where the crosshairs settle. If the crosshairs always settle to the right, either make an adjustment to your bipod, hold, or simply make sure to move back each shot. Also consider your scope. Running super high magnification can leave the number board out of the scope&#8217;s field view. That can really increase the risk of cross-firing.</p>
<p><strong>2. Equipment Failure.</strong> There are a wide variety of equipment failures you may encounter at a match, from loose sight fasteners, to broken bipods, to high-round-count barrels that that suddenly &#8220;go south&#8221; (just to mention a few possibilities). Mechanical components can and do fail. The best policy is to put some thought into what the critical failure points are, monitor wear of these parts, and have spares ready. This is where an ounce of prevention can prevent a ton of train wreck. On this note, if you like running hot loads, consider whether that extra 20 fps is worth blowing up a bullet (10 points), sticking a bolt (DNF), or worse yet, causing injury to yourself or someone nearby.</p>
<p><img src="http://accurateshooter.net/Blog/wreck06.jpg" alt="train wreck Bryan Litz shooting tips ballistics"></p>
<p>[Editor&#8217;s Note: The 2016 F-Class Nationals will employ electronic targets so conventional pit duties won&#8217;t be required. However, the following advice does apply for matches with conventional targets.] </p>
<p><strong>3. Scoring/Pit Malfunction.</strong> Although not related to your shooting technique, doing things to insure you get at least fair treatment from your scorer and pit puller is a good idea. Try to meet the others on your target so they can associate a face with the shooter for whom they’re pulling. If you learn your scorer is a Democrat, it&#8217;s probably best not to tell Obama jokes before you go for record. If your pit puller is elderly, it may be unwise to shoot very rapidly and risk a shot being missed (by the pit worker), or having to call for a mark. Slowing down a second or two between shots might prevent a 5-minute delay and possibly an undeserved miss.</p>
<p><img class="alignright" hspace="6" src="http://accurateshooter.net/Blog/wreck09.jpg" alt="train wreck Bryan Litz shooting tips ballistics"><strong>4. Wind Issues.</strong> Tricky winds derail many trains. A lot can be written about wind strategies, but here’s a simple tip about how to take the edge off a worse case scenario. You don’t have to start blazing away on the command of “Commence fire”. <strong>If the wind is blowing like a bastard when your time starts, just wait!</strong> You’re allotted 30 minutes to fire your string in long range slow fire. With average pit service, it might take you 10 minutes if you hustle, less in F-Class. Point being, you have about three times longer than you need. So let everyone else shoot through the storm and look for a window (or windows) of time which are not so adverse. Of course this is a risk, conditions might get worse if you wait. This is where judgment comes in. Just know you have options for managing time and keep an eye on the clock. Saving rounds in a slow fire match is a costly and embarrassing train wreck.</p>
<p><strong>5. Mind Your Physical Health.</strong>  While traveling for shooting matches, most shooters break their normal patterns of diet, sleep, alcohol consumption, etc.  These disruptions to the norm can have detrimental effects on your body and your ability to shoot and even think clearly. If you’re used to an indoor job and eating salads in air-conditioned break rooms and you travel to a week-long rifle match which keeps you on your feet all day in 90-degree heat and high humidity, while eating greasy restaurant food, drinking beer and getting little sleep, then you might as well plan on daily train wrecks. If the match is four hours away, rather than leaving at 3:00 am and drinking five cups of coffee on the morning drive, arrive the night before and get a good night’s sleep.&#8221;</p>
<blockquote><p>Keep focused on the important stuff. You never want to lose sight of the big picture. Keep the important, common sense things in mind as well as the minutia of meplat trimming, weighing powder to the kernel, and cleaning your barrel &#8217;til it’s squeaky clean. Remember, all the little enhancements can’t make up for one big train wreck!</p></blockquote>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/11/for-friday-the-13th-how-to-avoid-train-wrecks-at-matches/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>With Coated Bullets You Should Adjust Loads Conservatively</title>
		<link>https://bulletin.accurateshooter.com/2026/11/with-coated-bullets-you-should-adjust-loads-conservatively/</link>
		<comments>https://bulletin.accurateshooter.com/2026/11/with-coated-bullets-you-should-adjust-loads-conservatively/#comments</comments>
		<pubDate>Tue, 10 Nov 2026 06:12:47 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[- Articles]]></category>
		<category><![CDATA[Bullets, Brass, Ammo]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Boron Nitride]]></category>
		<category><![CDATA[Coated Bullets]]></category>
		<category><![CDATA[Danzac]]></category>
		<category><![CDATA[HBN]]></category>
		<category><![CDATA[Moly]]></category>
		<category><![CDATA[Moly Coated]]></category>
		<category><![CDATA[Molybdenum Disulfide]]></category>
		<category><![CDATA[WS2]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=73364</guid>
		<description><![CDATA[Coating bullets with a friction-reducing compound such as Molybdenum Disulfide (Moly) offers potential benefits, including reduced barrel heat, and being able to shoot longer strings of fire between bore cleanings. One of the effects of reduced friction can be the lessening of internal barrel pressures. This, in turn, means that coated bullets MAY run slower [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img src="https://bulletin.accurateshooter.com/wp-content/uploads/2015/11/molytip1501.jpg" alt="Moly Danzac Bullet Coating Anti-friction HBN" width="600" height="277" class="alignnone size-full wp-image-57371" /></p>
<p><big>Coating bullets with a friction-reducing compound such as Molybdenum Disulfide (Moly) offers potential benefits, including reduced barrel heat, and being able to shoot longer strings of fire between bore cleanings. One of the effects of reduced friction can be the lessening of internal barrel pressures. This, in turn, means that coated bullets MAY run slower than naked bullets (with charges held equal).</p>
<p>To restore velocities, shooters running coated bullets are inclined to &#8220;bump up&#8221; the load &#8212; but you <strong>need to be cautious</strong>.</big></p>
<p><b>Be Careful When Increasing Loads for Coated Bullets</b><br />
We caution shooters that when your start out with coated bullets in a &#8220;fresh barrel&#8221; you should NOT immediately raise the charge weight. It may take a couple dozen coated rounds before the anti-friction coating is distributed through the bore, and you really start to see the reduced pressures. Some guys will automatically add a grain or so to recommended &#8220;naked&#8221; bullet charge weights when they shoot coated bullets. That&#8217;s a risky undertaking.</p>
<p><img src="https://accurateshooter.net/pix/molychron22x1.jpg" alt="moly coated bullets friction chronograph"></p>
<blockquote><p><big>We recommend that you use &#8220;naked&#8221; bullet loads for the first dozen coated rounds through a new barrel. Use a chronograph and monitor velocities. It may take up to 30 rounds before you see a reduction in velocity of 30-50 fps that indicates that your anti-friction coating is fully effective.</big></p></blockquote>
<p>We have a friend who was recently testing moly-coated 6mm bullets in a 6-6.5&#215;47. Moly had not been used in the barrel before. Our friend had added a grain to his &#8220;naked&#8221; bullet load, thinking that would compensate for the predicted lower pressures. What he found instead was that his loads were <strong>WAY too hot initially</strong>. It took 30+ moly-coated rounds through the bore before he saw his velocities drop &#8212; a sign that the pressure had lowered due to the moly. For the rounds fired before that point his pressures were too high, and he ended up tossing some expensive Lapua brass into the trash because the primer pockets had expanded excessively.</p>
<p><b>LESSON: Start low, even with coated bullets. Don&#8217;t increase your charge weights (over naked bullet loads) until you have clear evidence of lower pressure and reduced velocity.</b></p>
<p><img src="https://accurateshooter.net/pix/danzac18a.jpg" alt="danzac moly coated coat bullets"></p>
<p><img src="https://accurateshooter.net/pix/danzac19a.jpg" alt="danzac moly coated coat bullets"></p>
<p><b>Procedure After Barrel Cleaning</b><br />
If you shoot Moly, and clean the barrel aggressively after a match, you may want to shoot a dozen coated &#8220;foulers&#8221; before starting your record string. Robert Whitley, who has used Moly in some of his rifles, tells us he liked to have 10-15 coated rounds through the bore before commencing record fire. In a &#8220;squeaky-clean&#8221; bore, you won&#8217;t get the full &#8220;benefits&#8221; of moly immediately.</p>
<p><a href="https://www.accurateshooter.com/technical-articles/guide-to-bullet-coating/" target="_blank"><img border="0" align="left" hspace="5" src="http://accurateshooter.net/100pix/bulletcoatx100.png"></a>To learn more about the properties of dry lubricants for bullets, read our <a href="https://accurateshooter.com/technical-articles/guide-to-bullet-coating/" target="_blank">Guide to Coating Bullets</a>. This covers the three most popular bullet coatings: Molybdenum Disulfide (Moly), Tungsten Disulfide (WS2 or &#8216;Danzac&#8217;), and Hexagonal Boron Nitride (HBN). The article discusses the pros and cons of the different bullet coatings and offers step-by-step, illustrated instructions on how to coat your bullets using a tumbler.</p>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/11/with-coated-bullets-you-should-adjust-loads-conservatively/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>Sort Brass By Neck-Wall Thickness with Case Neck Sorting Tool</title>
		<link>https://bulletin.accurateshooter.com/2026/11/sort-brass-by-neck-wall-thickness-with-case-neck-sorting-tool/</link>
		<comments>https://bulletin.accurateshooter.com/2026/11/sort-brass-by-neck-wall-thickness-with-case-neck-sorting-tool/#comments</comments>
		<pubDate>Fri, 06 Nov 2026 09:10:57 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[Gear Review]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Brass]]></category>
		<category><![CDATA[Case Neck]]></category>
		<category><![CDATA[Dial Indicator]]></category>
		<category><![CDATA[Neck sorting]]></category>
		<category><![CDATA[Neck-Turning]]></category>
		<category><![CDATA[neckwall thickness]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=72237</guid>
		<description><![CDATA[He who dies with the most toys wins &#8212; right? Well Sinclair has another interesting gadget you can add to your reloading bench. The Sinclair Case Neck Sorting Tool lets you quickly sort brass by neck-wall thickness. For those who shoot &#8220;no-turn&#8221; brass, this can improve neck-tension consistency. Large variances in neck-wall thickness can cause [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><a href="https://alnk.to/2Qu9THb" target="_blank"><img src="https://accurateshooter.net/pix/sorttool1901x600.jpg" alt="Sinclair Case Neck Sorting tool reloading benchrest neck-turning"></a></p>
<p><img class="alignright" hspace="6" src="https://accurateshooter.net/Blog/necksorttool01.jpg" alt="Case Neck thickness sorting gauge Sinclair accurateshooter.com">He who dies with the most toys wins &#8212; right? Well Sinclair has another interesting gadget you can add to your reloading bench. The Sinclair <a href="https://alnk.to/faEGhV9" target="_blank">Case Neck Sorting Tool</a> lets you quickly sort brass by neck-wall thickness. For those who shoot &#8220;no-turn&#8221; brass, this can improve neck-tension consistency. Large variances in neck-wall thickness can cause inconsistent neck &#8220;grip&#8221; on the bullet. Generally, we&#8217;ve found that more consistent neck tension will lower ES and (usually) improve accuracy. We know some guys who shoot no-turn 6mmBR brass in competition with considerable success &#8212; but their secret is pre-sorting their brass by neck-wall thickness. Cases that are out-of-spec are set aside for sighters (or are later skim-turned).</p>
<p><b>Watch Case Neck Sorting Tool Operation in Video</b><br />
<iframe width="600" height="340" src="https://www.youtube.com/embed/YMREA34-vD0" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></p>
<p><b>How the Case Neck Sorting Tool Works</b><br />
Here&#8217;s how the Sinclair tool works. Cases are rotated under an indicator tip while they are supported on a case-neck pilot and a support pin through the flash hole. The unit has a nice, wide base and low profile so it is stable in use. The tool works for .22 through .45 caliber cases and can be used on .17- and .20-caliber cases with the optional carbide alignment rod. The MIC-4 pin fits both .060 (PPC size) and .080 (standard size) flash holes. Sinclair&#8217;s <a href="https://alnk.to/8tMphPQ" target="_blank">Case Neck Sorting Tool</a> can be ordered with or without a dial indicator. The basic unit without dial indicator (item <a href="https://alnk.to/faEGhV9" target="_blank">item 749006612</a>) is priced at $59.99. With this standard tool you can use your own dial indicator with standard specifications. You can also buy the tool complete with dial indicator (item <a href="https://alnk.to/6bY2gke" target="_blank">749007129</a>) for $89.99. IMPORTANT: This sorting tool requires caliber-specific <strong>Case Neck Pilots</strong> which must be ordered separately.</p>
<p>Editor&#8217;s Comment: <em>The purpose of this Sinclair tool is rapid, high-quantity sorting of cartridge brass to ascertain significant case-neck-wall thickness variations. Consider this a rapid culling/sorting tool. If you are turning your necks, you will still need a quality <a href="https://alnk.to/60XNysL" target="_blank">ball micrometer</a> tool to measure neck-wall thickness (to .0005) before and after neck-turning operations.</em></p>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/11/sort-brass-by-neck-wall-thickness-with-case-neck-sorting-tool/feed/</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>Switching Primer Types CAN Change Pressure and Velocity</title>
		<link>https://bulletin.accurateshooter.com/2026/11/switching-primer-types-can-change-pressure-and-velocity/</link>
		<comments>https://bulletin.accurateshooter.com/2026/11/switching-primer-types-can-change-pressure-and-velocity/#comments</comments>
		<pubDate>Thu, 05 Nov 2026 09:35:34 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[Bullets, Brass, Ammo]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Tech Tip]]></category>
		<category><![CDATA[.308 Win]]></category>
		<category><![CDATA[CCI BR2]]></category>
		<category><![CDATA[Primer Velocity]]></category>
		<category><![CDATA[Primers and Pressure]]></category>
		<category><![CDATA[Varget]]></category>
		<category><![CDATA[Wolf Primer]]></category>

		<guid isPermaLink="false">http://bulletin.accurateshooter.com/?p=69439</guid>
		<description><![CDATA[We are often asked &#8220;Can I get more velocity by switching primer types?&#8221; The answer is &#8220;maybe&#8221;. The important thing to know is that changing primer types can alter your load&#8217;s performance in many ways &#8212; velocity average, velocity variance (ES/SD), accuracy, and pressure. Because there are so many variables involved you can&#8217;t really predict [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img src="https://accurateshooter.net/pix/primerchange1502.jpg" alt="Primer Wolf CCI Federal Muzzle velocity FPS reloading"></p>
<p>We are often asked &#8220;Can I get more velocity by switching primer types?&#8221; The answer is &#8220;maybe&#8221;. The important thing to know is that changing primer types can alter your load&#8217;s performance in many ways &#8212; velocity average, velocity variance (ES/SD), accuracy, and pressure. Because there are so many variables involved you can&#8217;t really predict whether one primer type is going to be better or worse than another. This will depend on your cartridge, your powder, your barrel, and even the mechanics of your firing pin system.</p>
<blockquote><p>BE SAFE: Be cautious when changing primer types. Glen Zediker recommended <strong>decreasing your load ONE FULL GRAIN</strong> when changing to a different primer type, one that you haven&#8217;t used before.</p></blockquote>
<p>Interestingly, however, a shooter on another forum did a test with his .308 Win semi-auto. Using Hodgdon Varget powder and <a href=https://www.sierrabullets.com/product/30-cal-7-62mm-155-gr-hpbt-matchking/" target="_blank">Sierra 155gr MatchKing</a> bullets, he found that <em>Wolf Large Rifle primers gave slightly higher velocities than did CCI-BR2s</em>. Interestingly, the amount of extra speed (provided by the Wolfs) increased as charge weight went up, though the middle value had the largest speed variance. The shooter observed: &#8220;The Wolf primers seemed to be obviously hotter and they had about the same or possibly better ES average.&#8221; See table:</p>
<table border='1' width='600' cellpadding='4'>
<tr align="middle" bgcolor='FFFDC6'>
<td><strong>Varget .308 load</strong></td>
<td><strong>45.5</strong> grains</td>
<td><strong>46.0</strong> grains</td>
<td><strong>46.5</strong> grains</td>
</tr>
<tr align="middle">
<td><strong>CCI BR2 Primers</strong></td>
<td>2751 fps</td>
<td>2761 fps</td>
<td>2783 fps</td>
</tr>
<tr align="middle">
<td><strong>Wolf LR Primers</strong></td>
<td>2757 fps</td>
<td>2780 fps</td>
<td>2798 fps</td>
</tr>
<tr align="middle">
<td><strong>Speed Delta</strong></td>
<td>6 fps</td>
<td>19 fps</td>
<td>15 fps</td>
</tr>
</table>
<p>You can&#8217;t extrapolate too much from the table above. This describes just <strong>one gun, one powder, and one bullet</strong>. Your Mileage May Vary (YMMV) as they say. However, this illustration does show that <strong>by substituting one component you may see significant changes</strong>. Provided it can be repeated in multiple chrono runs, an increase of 19 fps (with the 46.0 grain powder load) is meaningful. An extra 20 fps or so may yield a more optimal accuracy node or &#8220;sweet spot&#8221; that produces better groups. (Though faster is certainly NOT always better for accuracy &#8212; you have to test to find out.)</p>
<p><big><strong>WARNING: When switching primers, you should exercise caution.</strong> More speed may be attractive, but you have to consider that the &#8220;speedier&#8221; primer choice may also produce more pressure. Therefore, you must <strong>carefully monitor pressure signs</strong> whenever changing ANY component in a load. In his books, the late Glen Zediker recommended <strong>decreasing your load ONE FULL GRAIN</strong> when changing to a different primer type, one that you haven&#8217;t used before.</big></p>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/11/switching-primer-types-can-change-pressure-and-velocity/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>Case Grip on Bullets — Why Neck Bushing Size is Just ONE Factor</title>
		<link>https://bulletin.accurateshooter.com/2026/11/case-grip-on-bullets-why-neck-bushing-size-is-just-one-factor/</link>
		<comments>https://bulletin.accurateshooter.com/2026/11/case-grip-on-bullets-why-neck-bushing-size-is-just-one-factor/#comments</comments>
		<pubDate>Tue, 03 Nov 2026 06:30:06 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[Bullets, Brass, Ammo]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Tech Tip]]></category>
		<category><![CDATA[Bushings]]></category>
		<category><![CDATA[Neck Tension]]></category>
		<category><![CDATA[Neck-wall]]></category>
		<category><![CDATA[Seating Detph]]></category>
		<category><![CDATA[Sizing Die]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=72636</guid>
		<description><![CDATA[Many novice hand-loaders believe that neck bushing Inside Diameter (ID) size is the only important factor in neck tension. In fact, many different things will influence the grip on your bullet and its ability to release from the case neck. To learn more about neck tension and &#8220;case grip&#8221;, take the time to read this [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img src="https://bulletin.accurateshooter.com/wp-content/uploads/2016/10/casegrip1601.jpg" alt="case neck bushing reloading die tension bullet release"></p>
<p><font size="2"><em>Many novice hand-loaders believe that neck bushing Inside Diameter (ID) size is the only important factor in neck tension. In fact, <strong>many different things will influence the grip on your bullet</strong> and its ability to release from the case neck. To learn more about neck tension and &#8220;case grip&#8221;, take the time to read this article carefully. We bet you&#8217;ll gain knowledge that will let you load more accurate ammo, with better ES/SD.</em></font></p>
<p>Editor: <em>Guys, this is a VERY important article. You really should read it over carefully, twice. Variations in the force required to release a bullet can significantly affect accuracy and ES/SD. You really need to know how the grip on bullet can be altered by many different factors.</em></p>
<h2>Neck Tension (i.e. Grip on Bullets) Is a Complex Phenomenon</h2>
<p>While we certainly have considerable control over neck tension by using tighter or looser bushings (with smaller or bigger Inside Diameters), bushing size is only one factor at work. It&#8217;s important to understand the multiple factors that can <strong>increase or decrease the resistance to bullet release</strong>. Think in terms of overall brass-on-bullet &#8220;grip&#8221; instead of just bushing size (or the internal neck diameter in non-bushing full-length sizing dies).</p>
<h3>Bullet grip is affected by many things, such as:</h4>
<p style="font-size:14px;line-height:150%"">1. Neck-wall thickness.<br />
2. Amount of bullet bearing surface (shank) in the neck.<br />
3. Surface condition inside of neck (residual carbon can act as a lubricant; ultrasonic cleaning makes necks &#8220;grabby&#8221;).<br />
4. Length of neck (e.g. 6mmBR neck vs. 6mm Dasher).<br />
5. Whether or not the bullets have an anti-friction coating.<br />
6. The springiness of the brass (which is related to degree of work-hardening; number of firings etc.)<br />
7. The bullet jacket material.<br />
8. The outside diameter of the bullet and whether it has a pressure ridge.<br />
9. Time duration between bullet seating and firing (necks can stiffen with time).<br />
10. How often the brass is annealed.<br />
11. Amount (length) of neck sized (e.g. you can size only half the neck).<br />
12. Interior diameter of bushing, or neck section of non-bushing die.<br />
</br><em>&#8211; and there are others&#8230;</em></p>
<blockquote><p><big>One needs to understand that bushing size isn&#8217;t the beginning and end of neck tension questions, because, even if bushing size is held constant, the amount of <strong>bullet &#8220;grip&#8221; can change dramatically as the condition of your brass changes</strong>. Bullet &#8220;grip&#8221; can also change if you alter your seating depth, and it can even change if you ultrasonically clean your cases.</big></p></blockquote>
<p>6-time U.S. National Long-Range Champion John Whidden adds: &#8220;Our tests show us that the condition of the necks in regards to lubed or not, carbon inside or not, squeaky clean or not, etc., matter even more than the size of the bushing used. An ultrasonically cleaned or brand new dry case neck make for some quite high seating force.&#8221;</p>
<p><img class="alignright" hspace="10" src="https://accurateshooter.net/Blog/reddingbushings.jpg" alt="Redding neck bushings" />In our <a href="https://forum.accurateshooter.com/" target="new">Shooters&#8217; Forum</a> a reader asked: &#8220;How much neck tension should I use?&#8221; This prompted a lengthy <a href="https://forum.accurateshooter.com/threads/neck-tension-how-much-do-you-like-and-why.3748485/" target="_blank">Forum discussion</a> in which other Forum members recommended a specific number based on their experience, such as .001&#8243;, .002&#8243;, or .003&#8243;. These numbers, as commonly used, correspond to the difference between case-neck OD after sizing and the neck OD of a loaded round, with bullet in place. In other words, the numbers refer to the nominal amount of interference fit (after sizing).</p>
<p>While these commonly-used &#8220;tension numbers&#8221; (of .001&#8243;, .002&#8243; etc.) can be useful as starting points, neck tension is actually a fairly complex subject. The actual amount of &#8220;grip&#8221; on the bullet is a function of many factors, of which neck-OD reduction during sizing is just one. Understanding these many factors will help you maintain consistent neck tension as your brass &#8220;evolves&#8221; over the course of multiple reloadings.</p>
<p><strong>Seating Depth Changes Can Increase or Decrease Grip on Bullet</strong><br />
You can do this simple experiment. Seat a boat-tail bullet in your sized neck with .150&#8243; of bearing surface (shank) in the neck. Now remove the bullet with an impact hammer. Next, take another identical bullet and seat it with .300&#8243; of bearing surface in another sized case (same bushing size/same nominal tension). You&#8217;ll find the deeper-seated bullet is gripped much harder.</p>
<p><img class="alignright" hspace="10" src="https://accurateshooter.net/Blog/ppcthinneck.jpg" alt="PPC lapua brass"><strong>Neck-Wall Thickness is Important Too</strong><br />
I have also found that thinner necks, particularly the very thin necks used by many 6mm PPC benchrest shooters, require more sizing to give equivalent &#8220;grip&#8221;. Again, do your own experiment. Seat a bullet in a case turned to .008&#8243; neckwall thickness and sized down .003&#8243;. Now compare that to a case with .014&#8243; neckwall thickness and sized down .0015&#8243;. You may find that the bullet in the thin necks actually pulls out easier, though it supposedly has more &#8220;neck tension&#8221;, if one were to consider bushing size alone.</p>
<p>In practical terms, because thick necks are less elastic than very thin necks, when you turn necks you may need to run tighter bushings to maintain the same amount of actual grip on the bullets (as compared to no-turn brass). Consequently, I suspect the guys using .0015&#8243; &#8220;tension&#8221; on no-turn brass may be a lot closer to the guys using .003&#8243; &#8220;tension&#8221; on turned necks than either group may realize.</p>
<p><strong>Toward a Better Definition of Neck Tension</strong><br />
As a convenient short-cut, we tend to describe neck tension by bushing size alone. When a guy says, &#8220;I run .002 neck tension&#8221;, that normally means he is using a die/bushing that sizes the necks .002&#8243; smaller than a loaded round. Well we know something about his post-sizing neck OD, but do we really have a reliable idea about how much force is required to release his bullets? Maybe not&#8230; This use of the term &#8220;neck tension&#8221; when we are really only describing the amount of neck diameter reduction with a die/bushing is really kind of incomplete.</p>
<p>My point here is that it is overly simplistic to ask, &#8220;should I load with .001 tension or .003?&#8221; In reality, an .001&#8243; reduction (after springback) on a thick neck might provide MORE &#8220;grip&#8221; on a deep-seated bullet than an .003&#8243; reduction on a very thin-walled neck holding a bullet with minimal bearing surface in the neck. Bushing ID is something we can easily measure and verify. We use bushing size as a descriptor of neck tension because it is convenient and because the other important factors are hard to quantify. But those factors shouldn&#8217;t be ignored if you want to maintain consistent neck tension for optimal accuracy.</p>
<p>Consistency and accuracy &#8212; that&#8217;s really what this all about isn&#8217;t it? We want to find the best neck tension for accuracy, and then maintain that amount of grip-on-bullet over time. To do that you need to look not only at your bushing size, but also at how your brass has changed (work-hardened) with time, and whether other variables (such as the amount of carbon in the neck) have changed. <strong>Ultimately, optimal neck tension must be ascertained experimentally</strong>. You have to go out and test empirically to see what works, in YOUR rifle, with YOUR bullets and YOUR brass. And you may have to change the nominal tension setting (i.e. bushing size) as your brass work-hardens or IF YOU CHANGE SEATING DEPTHS.</p>
<blockquote><p><big><strong>Remember that bushing size alone does not tell us all we need to know about the neck&#8217;s true &#8220;holding power&#8221; on a bullet, or the energy required for bullet release</strong>. True bullet grip is a more complicated phenomenon, one that is affected by numerous factors, some of which are very hard to quantify.</big></p></blockquote>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/11/case-grip-on-bullets-why-neck-bushing-size-is-just-one-factor/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>Bullet Sorting: Overall Length vs. Base-to-Ogive vs. Weight</title>
		<link>https://bulletin.accurateshooter.com/2026/10/bullet-sorting-overall-length-vs-base-to-ogive-vs-weight/</link>
		<comments>https://bulletin.accurateshooter.com/2026/10/bullet-sorting-overall-length-vs-base-to-ogive-vs-weight/#comments</comments>
		<pubDate>Thu, 29 Oct 2026 10:24:26 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[- Articles]]></category>
		<category><![CDATA[Bullets, Brass, Ammo]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Bryan Litz]]></category>
		<category><![CDATA[Bullet Sorting]]></category>
		<category><![CDATA[OAL Sorting]]></category>
		<category><![CDATA[USAMU]]></category>
		<category><![CDATA[Weight Sort Bullets]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=73331</guid>
		<description><![CDATA[The USAMU has published a &#8220;how-to&#8221; article about bullet sorting. While many of us may sort bullets by base-to-ogive length (and/or weight), the USAMU story explores the &#8220;how and why&#8221; of sorting bullets by Overall Length (OAL). Read the article highlights below, and make your own decision as to whether OAL sorting is worth the [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img src="https://accurateshooter.net/pix/bulloal1501.jpg" alt="Bullet, Sort, Jacket, Sierra, USAMU, Sort, Bell Curve, Distribution, OAL"></p>
<p><em>The <a href="https://www.facebook.com/USAMU1956" target="_blank">USAMU</a> has published a &#8220;how-to&#8221; article about bullet sorting. While many of us may sort bullets by base-to-ogive length (and/or weight), the USAMU story explores the &#8220;how and why&#8221; of sorting bullets by Overall Length (OAL). Read the article highlights below, and make your own decision as to whether OAL sorting is worth the time and effort. Bryan Litz of Applied Ballistics says that sorting by OAL is not a bad idea, but <strong>base-to-ogive bullet sorting</strong> probably represents a better investment of your time.</em></p>
<p><img src="https://accurateshooter.net/Blog/sortbull1503.png" alt="USAMU bullet sorting tips"></p>
<h3><b>Bullet Sorting by Overall Length</b></h3>
<p>We&#8217;d like to share a specialized handloading technique which we&#8217;ve long found beneficial to our long-range (600 yards and beyond) accuracy. Sorting of bullets for extreme long range (LR) accuracy is not difficult to do, but some background in theory is needed.</p>
<p>Here at USAMU&#8217;s Handloading Shop, we only sort individual bullets for the most demanding Long-Range applications and important competitions. Only the most accurate rifles and shooters can fully exploit the benefits of this technique. The basic sorting process involves measuring the Overall Length (OAL) of the bullets, and grouping them in 0.001&#8243; increments. It&#8217;s not unusual to find lots of match bullets that vary as much as 0.015&#8243;-0.020&#8243; in length throughout the lot, although lots with much less variation are seen as well. Even in bullet lots with 0.015&#8243; OAL variation, the bullet base-to-ogive length will show much less variation. Hence, our basic sort is by bullet OAL. One obvious benefit of sorting is easily seen in the attached photo. The few <strong>bullets that are VERY different from the average are culled out</strong>, reducing probable fliers.</p>
<p>How does one know what OAL increments to use when sorting? The answer is simple. As each lot of bullets is unique in its OAL distribution, it&#8217;s best to <strong>sample your bullet lot</strong> and see how they are distributed. In the attached photo, you will see a set of loading trays with a strip of masking tape running along the bottom. Each vertical row of holes is numbered in 0.001&#8243; increments corresponding to the bullets&#8217; OAL. A digital caliper makes this task much easier. As each bullet is measured, it is placed in the line of holes for its&#8217; OAL, and gradually, a roughly bell-shaped curve begins to form.</p>
<p>Note that near the center, bullets are much more plentiful than near the edges. At the extreme edges, there are a few that differ markedly from the average, and these make great chronograph or sighting-in fodder. We recommend using a <strong>sample of 200 bullets</strong> from your lot, and 300 is even better. Some bullet lots are very consistent, with a tall, narrow band of highly-uniform bullets clustered together over just a few thousandths spread. Other lots will show a long, relatively flat curve (less uniform), and you may also see curves with 2 or more &#8220;spikes&#8221; separated by several 0.001&#8243; OAL increments.</p>
<p><img src="https://accurateshooter.net/Blog/bryanbday02.jpg" alt="Bryan Litz Applied Ballistics Bullet Sorting AccurateShooter.com"></p>
<blockquote><h2> Bullet Sorting &#8212; OAL vs. Base-to-Ogive vs. Weight</h2>
<p><big><b>Expert advice from Bryan Litz, Applied Ballistics</b></big><br />
I’m often asked what is a the best measure to sort bullets by, and the answer (to this and many other questions in ballistics) is: it depends.</p>
<p>Choosing to sort by overall length (OAL), base to ogive (BTO), bearing surface, weight, etc. can get overwhelming. Shooters typically look for something they can measure, which shows a variation and sort by that. It’s common for dimensional variations to correlate. For example, bullets which are longer in OAL are typically also shorter in BTO, and have longer noses. All these are symptoms of a bullet that was pushed a little further into the pointing die, or possibly had more than average lube while being swaged. So in essence, if you sort by BTO, you’re measuring one symptom which can indicate a pattern in the bullets shape.</p>
<p>So, the question still stands &#8212; what should you measure?  You’ll always see more variation in OAL than BTO, so it’s easier to sort by OAL.  But sometimes the bullet tips can be jagged and have small burrs which can be misleading. <strong>Measuring BTO will result in a lower spread, but is a more direct measure of bullet uniformity</strong>.</p>
<p>Then there&#8217;s the question of how much variation is too much, or, how many bins should you sort into? Shooters who see 0.025” variation in BTO may choose to sort into 5 bins of 0.005”.  But if you have only 0.005” variation in the box, you’ll still sort into 5 bins of 0.001”.  What’s correct? You have to shoot to know. Live fire testing will answer more questions, and answer them more decisively than any amount of discussion on the subject.  The test I recommend is to identify bullets on the extreme short end of the spectrum, and some on the extreme long end.  Load at least 10 rounds of each, and take turns shooting 5-shot groups with them.  If there is a difference, it will be evident. The results of the testing will answer your question of: should I sort based on X, Y, or Z?”</p>
<p>You can read more discussions on this and other similar subjects in our Accurateshooter.com Shooters&#8217; Forum. Here&#8217;s a link to a thread discussing bullet sorting: <a href="https://forum.accurateshooter.com/threads/purpose-of-bullet-sorting.3911067/#post-36845513" target="_blank">Bullet Sorting Thread</a></p></blockquote>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/10/bullet-sorting-overall-length-vs-base-to-ogive-vs-weight/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>How to Evaluate Pesky Fliers During Load Development</title>
		<link>https://bulletin.accurateshooter.com/2026/10/how-to-evaluate-pesky-fliers-during-load-development/</link>
		<comments>https://bulletin.accurateshooter.com/2026/10/how-to-evaluate-pesky-fliers-during-load-development/#comments</comments>
		<pubDate>Wed, 28 Oct 2026 09:04:00 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[- Articles]]></category>
		<category><![CDATA[Bullets, Brass, Ammo]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Shooting Skills]]></category>
		<category><![CDATA[Fliers]]></category>
		<category><![CDATA[Group Size]]></category>
		<category><![CDATA[Load Development]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=73328</guid>
		<description><![CDATA[by Sierra Bullets Ballistic Technician Gary Prisendorf Occasionally someone will ask, “Why did I get a flyer that didn’t go in with the rest of my group?” If I had an answer that would stop flyers from happening, I would be rich. There are many reasons why this can happen. Everything from gripping a forearm [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img src="https://bulletin.accurateshooter.com/wp-content/uploads/2017/08/flyer1703.jpg" alt="Sierra Bullets Reloading Flier Flyer load development groups"></p>
<p><i>by Sierra Bullets Ballistic Technician Gary Prisendorf</i><br />
Occasionally someone will ask, “Why did I get a flyer that didn’t go in with the rest of my group?”  If I had an answer that would stop flyers from happening, I would be rich.</p>
<p>There are many reasons why this can happen. Everything from gripping a forearm differently to variations in the brass casing, the list goes on and on. Most of the time the <strong>flyer is usually shooter induced</strong> and sometimes what you may think is a flyer, is just part of your group. There are a lot of shooters, that go out and test a load and they may shoot a 3/8” group at 100 yards and think that load is good. But I have seen far too many times that you can shoot another group, same load, same rifle and the next time you may get a 1 ¼” group.</p>
<p><img src="https://bulletin.accurateshooter.com/wp-content/uploads/2017/08/flier1701.png" alt="Sierra bullets load development flyer group measurement target"></p>
<p>The total opposite can also occur. You may shoot a 1 ¼&#8221; group and turn around and follow it with a 1/2&#8243; group without changing anything. If you only shot the one group, you might decide that load wasn’t any good and move on to something else without really knowing what that load was capable of.</p>
<p>To really determine how a particular load is performing we <strong>need to shoot multiple groups and take an average of the group sizes</strong> to really see what that rifle/load combination is really capable of.</p>
<p>I suggest shooting a minimum of three 5-shot groups and averaging the group sizes before deciding if the load is acceptable or not. Obviously the more rounds you shoot for a group and the more groups that you shoot, you will get a much better representation of what that particular combination can do.</p>
<p>Now I’m not saying to go out and shoot 30 groups with 50 rounds in each group to determine how well your load is shooting. That would be a bit pointless, in some cases it would be time to re-barrel your rifle before your load development was finished.</p>
<p>In most cases, I feel that three to five, 5-shot groups will give you a pretty good representation of how a load will perform in that specific firearm.</p>
<p><a href="https://sierrabullets.com/" target="_blank" rel="noopener"><img border="0" src="https://accurateshooter.net/Blog/sierrawhy01op.jpg" alt="Sierra Bullets reloading advice tips information"></a></p>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/10/how-to-evaluate-pesky-fliers-during-load-development/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>Avoid Having a ‘Train Wreck’ at the 2026 F-Class Nationals</title>
		<link>https://bulletin.accurateshooter.com/2026/10/avoid-having-a-train-wreck-at-the-2026-f-class-nationals/</link>
		<comments>https://bulletin.accurateshooter.com/2026/10/avoid-having-a-train-wreck-at-the-2026-f-class-nationals/#comments</comments>
		<pubDate>Tue, 27 Oct 2026 10:44:04 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[Competition]]></category>
		<category><![CDATA[Shooting Skills]]></category>
		<category><![CDATA[Tech Tip]]></category>
		<category><![CDATA[Ben Avery]]></category>
		<category><![CDATA[Bryan Litz]]></category>
		<category><![CDATA[F-Class]]></category>
		<category><![CDATA[F-Open]]></category>
		<category><![CDATA[F-TR]]></category>
		<category><![CDATA[Mental Game]]></category>
		<category><![CDATA[NRA F-Class Nationals]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Train Wrecks]]></category>
		<category><![CDATA[Wind Reading]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=73325</guid>
		<description><![CDATA[The 2026 NRA F-Class National Championships for F-TR and F-Open classes are underway at the Ben Avery range in Phoenix, Arizona. The Mid-Range F-Class Nationals commenced Sunday, October 25 and run through October 28th. The 1000-yard Long Range F-Class Championships commence on October 29 and conclude on Sunday, November 1st. How to Avoid &#8220;Train Wrecks&#8221; [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img src="https://accurateshooter.net/Blog/wreck01.jpg" alt="train wreck Bryan Litz shooting tips ballistics"></p>
<p><em>The 2026 NRA F-Class National Championships for F-TR and F-Open classes are underway at the Ben Avery range in Phoenix, Arizona. The Mid-Range F-Class Nationals commenced Sunday, October 25 and run through October 28th. The 1000-yard Long Range F-Class Championships commence on October 29 and conclude on Sunday, November 1st.</em></p>
<p><img src="https://accurateshooter.net/pix/fnats26oct1.jpg" alt="2022 NRA F-Class Nationals Ben Avery AZ train wreck Bryan Litz shooting tips ballistics"></p>
<h2>How to Avoid &#8220;Train Wrecks&#8221; In Competition</h2>
<p>In any shooting competition, you must try to avoid major screw-ups that can ruin your day (or your match). In this article, past F-TR National Mid-Range and Long Range Champion Bryan Litz talks about &#8220;Train Wrecks&#8221;, i.e. those big disasters (such as equipment failures) that can ruin a whole match. Bryan illustrates the types of &#8220;train wrecks&#8221; that commonly befall competitors, and he explains how to avoid these &#8220;unmitigated disasters&#8221;.</p>
<blockquote><p><big>Urban Dictionary &#8220;Train Wreck&#8221; Definition: &#8220;<em>A total @#$&#038;! disaster &#8230; the kind that makes you want to shake your head</em>.&#8221;</big></p></blockquote>
<p><img hspace="6" class="alignright" hspace="6" src="http://accurateshooter.net/Blog/wreck07.jpg" alt="train wreck Bryan Litz shooting tips ballistics"><em><strong>Train Wrecks (and How to Avoid Them)</strong></em><br />
<em>by Bryan Litz of </em> <a href="http://appliedballisticsllc.com" target="_blank"><strong>Applied Ballistics LLC</strong></a>.</p>
<p>Success in long range competition depends on many things. Those who aspire to be competitive are usually detail-oriented, and focused on all the small things that might give them an edge. Unfortunately it’s common for shooters lose sight of the big picture &#8212; missing the forest for the trees, so to speak.</p>
<p>Consistency is one of the universal principles of successful shooting. The tournament champion is the shooter with the highest average performance over several days, often times not winning a single match. While you can win tournaments without an isolated stellar performance, <strong>you cannot win tournaments if you have a single train wreck performance</strong>. And this is why it’s important for the detail-oriented shooter to keep an eye out for potential &#8220;big picture&#8221; problems that can derail the train of success!</p>
<p>Train wrecks can be defined differently by shooters of various skill levels and categories. Anything from problems causing a miss, to problems causing a 3/4-MOA shift in wind zero can manifest as a train wreck, depending on the kind of shooting you’re doing.</p>
<p>Below is a list of common <strong>Shooting Match Train Wrecks</strong>, and suggestions for avoiding them.</p>
<p><strong>1. Cross-Firing.</strong> The fastest and most common way to destroy your score (and any hopes of winning a tournament) is to cross-fire. The cure is obviously basic awareness of your target number on each shot, but you can stack the odds in your favor if you’re smart. For sling shooters, establish your Natural Point of Aim (NPA) and monitor that it doesn’t shift during your course of fire. If you’re doing this right, you’ll always come back on your target naturally, without deliberately checking each time. You should be doing this anyway, but avoiding cross-fires is another incentive for monitoring this important fundamental. In F-Class shooting, pay attention to how the rifle recoils, and where the crosshairs settle. If the crosshairs always settle to the right, either make an adjustment to your bipod, hold, or simply make sure to move back each shot. Also consider your scope. Running super high magnification can leave the number board out of the scope&#8217;s field view. That can really increase the risk of cross-firing.</p>
<p><strong>2. Equipment Failure.</strong> There are a wide variety of equipment failures you may encounter at a match, from loose sight fasteners, to broken bipods, to high-round-count barrels that that suddenly &#8220;go south&#8221; (just to mention a few possibilities). Mechanical components can and do fail. The best policy is to put some thought into what the critical failure points are, monitor wear of these parts, and have spares ready. This is where an ounce of prevention can prevent a ton of train wreck. On this note, if you like running hot loads, consider whether that extra 20 fps is worth blowing up a bullet (10 points), sticking a bolt (DNF), or worse yet, causing injury to yourself or someone nearby.</p>
<p><img src="http://accurateshooter.net/Blog/wreck06.jpg" alt="train wreck Bryan Litz shooting tips ballistics"></p>
<p>[Editor&#8217;s Note: The 2016 F-Class Nationals will employ electronic targets so conventional pit duties won&#8217;t be required. However, the following advice does apply for matches with conventional targets.] </p>
<p><strong>3. Scoring/Pit Malfunction.</strong> Although not related to your shooting technique, doing things to insure you get at least fair treatment from your scorer and pit puller is a good idea. Try to meet the others on your target so they can associate a face with the shooter for whom they’re pulling. If you learn your scorer is a Democrat, it&#8217;s probably best not to tell Obama jokes before you go for record. If your pit puller is elderly, it may be unwise to shoot very rapidly and risk a shot being missed (by the pit worker), or having to call for a mark. Slowing down a second or two between shots might prevent a 5-minute delay and possibly an undeserved miss.</p>
<p><img class="alignright" hspace="6" src="http://accurateshooter.net/Blog/wreck09.jpg" alt="train wreck Bryan Litz shooting tips ballistics"><strong>4. Wind Issues.</strong> Tricky winds derail many trains. A lot can be written about wind strategies, but here’s a simple tip about how to take the edge off a worse case scenario. You don’t have to start blazing away on the command of “Commence fire”. <strong>If the wind is blowing like a bastard when your time starts, just wait!</strong> You’re allotted 30 minutes to fire your string in long range slow fire. With average pit service, it might take you 10 minutes if you hustle, less in F-Class. Point being, you have about three times longer than you need. So let everyone else shoot through the storm and look for a window (or windows) of time which are not so adverse. Of course this is a risk, conditions might get worse if you wait. This is where judgment comes in. Just know you have options for managing time and keep an eye on the clock. Saving rounds in a slow fire match is a costly and embarrassing train wreck.</p>
<p><strong>5. Mind Your Physical Health.</strong>  While traveling for shooting matches, most shooters break their normal patterns of diet, sleep, alcohol consumption, etc.  These disruptions to the norm can have detrimental effects on your body and your ability to shoot and even think clearly. If you’re used to an indoor job and eating salads in air-conditioned break rooms and you travel to a week-long rifle match which keeps you on your feet all day in 90-degree heat and high humidity, while eating greasy restaurant food, drinking beer and getting little sleep, then you might as well plan on daily train wrecks. If the match is four hours away, rather than leaving at 3:00 am and drinking five cups of coffee on the morning drive, arrive the night before and get a good night’s sleep.&#8221;</p>
<blockquote><p>Keep focused on the important stuff. You never want to lose sight of the big picture. Keep the important, common sense things in mind as well as the minutia of meplat trimming, weighing powder to the kernel, and cleaning your barrel &#8217;til it’s squeaky clean. Remember, all the little enhancements can’t make up for one big train wreck!</p></blockquote>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/10/avoid-having-a-train-wreck-at-the-2026-f-class-nationals/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>Reduce Run-Out by Rotating Cases During Bullet Seating</title>
		<link>https://bulletin.accurateshooter.com/2026/10/reduce-run-out-by-rotating-cases-during-bullet-seating/</link>
		<comments>https://bulletin.accurateshooter.com/2026/10/reduce-run-out-by-rotating-cases-during-bullet-seating/#comments</comments>
		<pubDate>Sun, 18 Oct 2026 05:20:10 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[Bullets, Brass, Ammo]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Tech Tip]]></category>
		<category><![CDATA[30 BR]]></category>
		<category><![CDATA[Case Run-out]]></category>
		<category><![CDATA[Concentricity]]></category>
		<category><![CDATA[Dies]]></category>
		<category><![CDATA[Hand Die]]></category>
		<category><![CDATA[Rotate Seating Die]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=73283</guid>
		<description><![CDATA[Here is a simple technique that can potentially help you load straighter ammo, with less run-out (as measured on the bullet). This procedure costs nothing and adds only a few seconds to the time needed to load a cartridge. Next time you&#8217;re loading ammo with a threaded (screw-in) seating die, try seating the bullet in [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><img src="https://accurateshooter.net/pix/rotatedie1901.png" alt="Bullet Seating Reloading rotate cartridge Run-out TIR"></p>
<p>Here is a simple technique that can potentially help you load straighter ammo, with <strong>less run-out</strong> (as measured on the bullet). This procedure costs nothing and adds only a few seconds to the time needed to load a cartridge. Next time you&#8217;re loading ammo with a threaded (screw-in) seating die, try seating the bullet in <strong>two stages</strong>. Run the cartridge up in the seating die just enough to seat the bullet half way. Then lower the cartridge and <strong>rotate it 180°</strong> in the shell-holder. Now raise the cartridge up into the die again and finish seating the bullet.</p>
<p>Steve, aka &#8220;Short Range&#8221;, one of our Forum members, recently inquired about run-out apparently caused by his bullet-seating process. Steve&#8217;s 30BR cases were coming out of his neck-sizer with good concentricity, but the run-out nearly doubled after he seated the bullets. At the suggestion of other Forum members, Steve tried the process of rotating his cartridge while seating his bullet. Steve then measured run-out on his loaded rounds. To his surprise <em>there was a noticeable reduction in run-out on the cases which had been rotated during seating</em>. Steve explains: &#8220;For the rounds that I loaded yesterday, I seated the bullet half-way, and turned the round 180 degrees, and finished seating the bullet. That reduced the bullet runout by almost half on most rounds compared to the measurements from the first test.&#8221;</p>
<h2><a href="https://forum.accurateshooter.com/threads/how-much-runout-is-acceptable.3746155/" target="_blank"><strong>READ Bullet Seating Forum Thread &#187;</strong></a></h2>
<p><img title="Bullet Seating Concentricity" src="https://accurateshooter.net/Blog/runoutchart01a.png" alt="run-out bullet" /></p>
<p><img title="Bullet Seating Concentricity" src="https://accurateshooter.net/Blog/runoutchart02.png" alt="run-out bullet" /></p>
<p>Steve recorded run-out measurements on his 30 BR brass using both the conventional (one-pass) seating procedure, as well as the two-stage (with 180° rotation) method. Steve&#8217;s measurements are collected in the two charts above. As you can see, the run-out was less for the rounds which were rotated during seating. Note, the change is pretty small (less than .001&#8243; on average), but every little bit helps in the accuracy game. If you use a threaded (screw-in) seating die, you might try this two-stage bullet-seating method. Rotating your case in the middle of the seating process won&#8217;t cost you a penny, and it just <em>might</em> produce straighter ammo (nothing is guaranteed). If you do NOT see any improvement on the target, you can always go back to seating your bullets in one pass. <a href="https://forum.accurateshooter.com/threads/how-much-runout-is-acceptable.3746155/" target="_blank"><strong>READ Forum Thread.</strong></a></p>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/10/reduce-run-out-by-rotating-cases-during-bullet-seating/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>LEE Breech Lock Hand Press &#8212; Versatile, Portable, Affordable</title>
		<link>https://bulletin.accurateshooter.com/2026/10/lee-breech-lock-hand-press-versatile-portable-affordable/</link>
		<comments>https://bulletin.accurateshooter.com/2026/10/lee-breech-lock-hand-press-versatile-portable-affordable/#comments</comments>
		<pubDate>Wed, 07 Oct 2026 08:13:59 +0000</pubDate>
		<dc:creator><![CDATA[Editor]]></dc:creator>
				<category><![CDATA[- Videos]]></category>
		<category><![CDATA[Gear Review]]></category>
		<category><![CDATA[Reloading]]></category>
		<category><![CDATA[Breechlock Press]]></category>
		<category><![CDATA[Compact Press]]></category>
		<category><![CDATA[Field loading]]></category>
		<category><![CDATA[Lee Breech Lock]]></category>
		<category><![CDATA[Lee Hand Press]]></category>
		<category><![CDATA[Reload at Range]]></category>

		<guid isPermaLink="false">https://bulletin.accurateshooter.com/?p=73250</guid>
		<description><![CDATA[The LEE Breech Lock Hand Press is a useful addition to any reloader&#8217;s tool collection. This Hand Press allows you to resize brass or seat bullets while at the range or away from your loading room. No it won&#8217;t replace your Co-Ax or Rockchucker, but this is a handy piece of gear. And it&#8217;s VERY [&#8230;]]]></description>
				<content:encoded><![CDATA[<p><a href="https://www.midsouthshooterssupply.com/item/00999006blhlkit/lee-precision-breech-lock-handloader-kits" target="_blank"><img src="https://accurateshooter.net/pix/leebreech25x1.jpg" alt="Lee breech lock hand press kit"></a></p>
<p><a href="https://www.midsouthshooterssupply.com/item/00999006blhlkit/lee-precision-breech-lock-handloader-kits" target="_blank"><img class="alignright" hspace="6" src="https://accurateshooter.net/pix/leebreech25x2.jpg" alt="Lee breech lock hand press kit"></a>The <a href="https://alnk.to/8PH2sdL" target="_blank">LEE Breech Lock Hand Press</a> is a useful addition to any reloader&#8217;s tool collection. This Hand Press allows you to resize brass or seat bullets while at the range or away from your loading room. No it won&#8217;t replace your Co-Ax or Rockchucker, but this is a handy piece of gear. And it&#8217;s VERY affordable. The LEE Breech Lock Hand Press (by itself) is <a href="https://alnk.to/8PH2sdL" target="_blank">$52.99 at MidwayUSA</a> &#8212; a great deal. Or, for <a href="https://www.midsouthshooterssupply.com/item/00999006blhlkit/lee-precision-breech-lock-handloader-kits" target="_blank">$73.99 at Midsouth</a> you can get a complete Lee Hand Press Kit including Breech Lock Hand Press, Reloading Die Set, Lock Ring Wrench, Breach Lock Ram Prime, and Storage Box. Choose one of four cartridge types for the provided dies: .223 Remington, 9mm Luger, .38 SPL/.357 Mag, and .45 ACP.</p>
<p><iframe width="600" height="340" src="https://www.youtube.com/embed/S2u6Zb6VFR4" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe></p>
<p><img class="alignright" hspace="6" src="https://accurateshooter.net/pix/leehand21x3.jpg" alt="Lee breech lock hand press kit"></a><b>LEE Hand Press Quick-Change Die Functionality</b><br />
This LEE Press includes the Breech Lock Quick-Change Die Feature, so you can instantly change dies with just a twist of the wrist. One Breech Lock Quick Change Bushing is included. The Breech Lock Hand Press is light and compact. It tips the scale at a mere 1 3/4 pounds and overall product length is 11.5&#8243;. Note: the maximum overall length cartridge the LEE Hand Press can accept is 3.650 inches.</p>
<p>While we don&#8217;t recommend the Hand Press for major full-length sizing chores, it does a good job seating bullets. This makes it a handy &#8220;field expedient&#8221; tool when doing load development at the range. For example you can experiment with seating depth by loading a batch of cartridges at home with the bullets deliberately seated long. Then, at the range, you can re-seat the bullets progressively shorter (in a series of rounds), until you find the optimal Cartridge OAL.</p>
<p><iframe width="600" height="340" src="https://www.youtube.com/embed/48aEp-SNWCw?si=9CXoApZnsAlSuXn4" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></p>
<p>LEE&#8217;s Hand Press is also great for decapping operations. One verified buyer reports: &#8220;I mostly use it for decapping while watching TV, with a universal decapper die. Of course it is also useful for other operations. I wouldn&#8217;t love sizing large rifle cases with it, but if you&#8217;ve prepped your cases on a bigger press you could comfortably take it to the range for load development, one round at a time, working right there at the line instead of making a bunch of loads at home that you&#8217;ll have to disassemble later. It&#8217;s smaller and more lightweight than it looks[.]&#8221;</p>
<p><iframe width="600" height="340" src="https://www.youtube.com/embed/w2TeFVvw6Cc?si=kaUfvWW_ANExgH1-" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></p>
<p><big><b>Using LEE Hand Press to Load at the Range</b></big><br />
To learn more about using the LEE Hand Press in the field with a compact scale, read <a href="https://www.gunsamerica.com/digest/reloading-without-a-bench/" target="_blank">Reloading Without a Bench</a> on <a href="https://www.gunsamerica.com/" target="_blank">GunsAmerica.com</a>. Author Christopher Mace explains: &#8220;Whether you want a better way to do load development, the capability to reload out of your &#8216;bugout bag&#8217;, or you’re short of space but wanting to get into reloading, the LEE Loaders and the LEE Hand Press offer you some options.&#8221;</p>
<p><a href="https://www.gunsamerica.com/digest/reloading-without-a-bench/" target="_blank"><img src="https://accurateshooter.net/pix/leetool1801.jpg" alt="Reloading Lee hand press review GunsAmerica"></a></p>
]]></content:encoded>
			<wfw:commentRss>https://bulletin.accurateshooter.com/2026/10/lee-breech-lock-hand-press-versatile-portable-affordable/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
	</channel>
</rss>
