Daily Bulletin » Ring Reducers https://bulletin.accurateshooter.com from AccurateShooter.com Thu, 18 Jun 2026 16:53:55 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.26 Ring Reducers Adapt 30mm Rings to Fit 1″ Scope Tubes https://bulletin.accurateshooter.com/2015/06/ring-reducers-adapt-1-scope-tubes-for-30mm-rings/ https://bulletin.accurateshooter.com/2015/06/ring-reducers-adapt-1-scope-tubes-for-30mm-rings/#comments Sat, 27 Jun 2015 06:30:56 +0000 http://accurateshooter.wordpress.com/2007/11/03/ring-reducers-adapt-1-scope-tubes-for-30mm-rings/ Forum member Jacob spotted this simple, but effective set of scope ring inserts on the Brownells’ Website. With these inserts, you can use a scope with 1″-diameter body in 30mm rings. Non-marring, matte black Delrin sleeves surround the scope tube so it can fit larger-diameter rings. Each sleeve comes in two parts for easy installation around your scope tube. Ring Reducers are sold as front/rear kits. Cost is $14.99 for the 30mm to 1″ ring adapters, item 084-000-091.

Brownells Ring Reducers

Note: These Brownells units simply function as plastic bushings. Unlike Burris Signature Ring inserts, they do not allow you to “pre-load” windage or elevation. If your rings are misaligned, the Brownells Ring Reducers won’t correct that problem.

]]> https://bulletin.accurateshooter.com/2015/06/ring-reducers-adapt-1-scope-tubes-for-30mm-rings/feed/ 0