Thanks to our Forum members, we’ve found sources for some of the most popular reloading powders for rifle accuracy cartridges. Handloaders know that powders such as Varget, H4350, H4895, H4831SC, H1000, Reloder 16, Reloder 23, and N150 are often in short supply. And it seems like Varget has been near impossible to find in recent months. As of Friday, August 28, 2020, here are some sources for many of these hard-to-find powders.

Hodgdon Varget 1-pound
Source: Powder Valley
NOTE: Varget 1-lb in stock; 8-pounders still out of stock
UPDATE 8/29/20: SOLD OUT — Our Members got the last of it.

Hodgdon H4350, 1-pound and 8-pound
Source: Powder Valley
Source: Midsouth Shooters
NOTE: Powder Valley has BOTH the 1-lb and 8-lb H4350 containers in stock. Midsouth has the 1-lb H4350 only.

Alliant Reloder 16 1-pound
Source: Powder Valley
NOTE: Reloder 16 1-lb in stock; RL16 8-pounders still out of stock

Hodgdon H4831SC, 1-pound and 8-pound
Source: Powder Valley
NOTE: Powder Valley has BOTH the 1-lb and 8-lb H4831SC containers in stock.

Hodgdon H1000 1-pound
Source: Powder Valley
NOTE: H1000 1-lb in stock; H1000 8-pounders still out of stock

Vihtavuori N150 1-pound and 8-pound
Source: Powder Valley
Source: Midsouth Shooters
NOTE: Powder Valley has N150 1-lb and 8-lb in stock. Midsouth has the 1-lb N150 only.

Forum members are lamenting that they can’t find Hodgdon H4350 at local gunstores or through major online Vendors. There ARE a few shops that do have H4350 (and Varget) on the shelves. But the nearest H4350 may be in another state, far away. Therefore, you may want to consider using Alliant Reloder 16 (RL16). We highly recommend Reloder 16 for shooters who can’t find H4350. RL16 has a very similar burn rate, excellent accuracy, and is VERY temp stable. Some ace F-Class shooters (among Top 10 at Nationals) tell us that, with hot ambient temps (80-100+° F), RL16 is even more temp stable than H4350.

*This is available in-store only at a few locations. You need to search store locations near you for availability. For example, H4350 8-pounders are available in a couple locations including Show Low, AZ and Midvale, UT. Varget 8-pounders are available in AZ, NM, and WY and a couple other states.

Do You Like H4350? Then You Should Try Reloder 16 — It Is Accurate and Temp Stable
Alliant Reloder 16 is used now by many top shooters for cartridges that work well with Hodgdon H4350. In fact, we’d say that Reloder 16 is the best substitute for H4350 on the market. Alliant’s RL 16 is very temp stable, offers good velocity, and the accuracy is top tier. Some guys report slightly better accuracy than H4350 in the .284 Win, .260 Rem, 6.5 Creedmoor, 6mm Creedmoor, and 6XC cartridges. If you currently use H4350, you should definitely give Alliant Reloder 16 a try. The powder also boasts excellent lot-to-lot consistency and contains a proprietary de-coppering additive.

This is NOT just a slower version of Alliant’s double-based Reloder 15 (which words great in the 6mmBR and Dasher cartridges). Reloder 16 is a completely new formulation, produced in Sweden by Bofors for Alliant. Reloder 16 utilizes TZ technology, which manipulates the response of the propellant and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures. As a result, Alliant’s Reloder 16 offers truly outstanding temperature stability.

Reloder 16 Load Recipes »

Reloder 16 Load Data PDF »

Do You Like H4350? Then You Should Try Reloder 16 — It Is Accurate and Temp Stable
Alliant Reloder 16 is used now by many top shooters for cartridges that work well with Hodgdon H4350. In fact, we’d say that Reloder 16 is the best substitute for H4350 on the market. Alliant’s RL 16 is very temp stable, offers good velocity, and the accuracy is top tier. Some guys report slightly better accuracy than H4350 in the .284 Win, .260 Rem, 6.5 Creedmoor, 6mm Creedmoor, and 6XC cartridges. If you currently use H4350, you should definitely give Alliant Reloder 16 a try. The powder also boasts excellent lot-to-lot consistency and contains a proprietary de-coppering additive.

This is NOT just a slower version of Alliant’s double-based Reloder 15 (which words great in the 6mmBR and Dasher cartridges). Reloder 16 is a completely new formulation, produced in Sweden by Bofors for Alliant. Reloder 16 utilizes TZ technology, which manipulates the response of the propellant and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures. As a result, Alliant’s Reloder 16 offers truly outstanding temperature stability.

Reloder 16 Load Recipes »

Reloder 16 Load Data PDF »

Match and Hunting Cartridge Applications:
Alliant tells us that Reloder 16 “is ideal for traditional hunting cartridges, such as .30-06 Springfield and .270 Winchester, as well as 6.5mm target loads and tactical applications wherein temperature stability is required.” We also think the powder will work well in these popular match cartridges: 6XC, 6mm Creedmoor, .243 Win, 6.5×47 Lapua, 6.5 Creedmoor, .260 Rem, .284 Win, and .300 WSM. For example, Alliant’s Reloder 16 Load Data Page shows a 2932 FPS load with Berger 130 grain Hybrid bullet in the 6.5 Creedmoor.

Alliant Reloder 16 Load DATA for 6.5 Creedmoor:

Alliant Reloder 16 Load DATA for .243 Winchester:

NOTE: This is a partial .243 Win Data set. More loads available HERE.

Here’s an important announcement for anyone who uses a powder in the 4350 range. Alliant is now shipping the all-new Reloder 16 powder. The burn rate is slightly faster than Reloder 17, and a bit slower than Varget or Reloder 15. Notably, this new Reloder 16 powder is very temp stable. AccurateShooter.com was shown “top secret” test results comparing Reloder 16 with other popular propellants, including Hodgdon Extreme series powders. The results for Reloder 16 were remarkable. Reloder 16 showed extremely constant velocities even with very high ambient temps — so this is a powder you can shoot even on hot Arizona summer days.

This is NOT just a slower version of Alliant’s double-based Reloder 15 (which words great in the 6mmBR and Dasher cartridges). Reloder 16 is a completely new formulation, produced in Sweden by Bofors for Alliant. Reloder 16 utilizes TZ technology, which manipulates the response of the propellant and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures.

As a result, Reloder 16 offers outstanding temperature stability. Based on the test results we’ve seen, if you are using H4350 or IMR 4451 currently, you should definitely give Reloder 16 a try. The powder also boasts excellent lot-to-lot consistency and contains a proprietary de-coppering additive.

Match and Hunting Cartridge Applications:
Alliant tells us that Reloader 16 “is ideal for traditional hunting cartridges, such as .30-06 Springfield and .270 Winchester, as well as 6.5mm target loads and tactical applications wherein temperature stability is required.” We also think the powder may work very well in these popular match cartridges: 6XC, .243 Win, 6.5×47 Lapua, 6.5 Creedmoor, .260 Rem, .284 Win, and .300 WSM. For example, Alliant’s Load Data Sheet shows a 2772 FPS load with 142gr SMKs in the .260 Rem.

You can see scores of new-for-2016 products in the free January digital edition of Shooting Industry magazine. The new product offerings are found in a 28-page feature article starting on page 76 and ending on page 104. In those pages you’ll find new items from leading companies such as: Alliant, Browning, Hodgdon, Hornady, Lyman, Nikon, Ruger, Vortex, and Weaver Optics.

Important New Products
You can also see the new products in Shooting Industry magazine’s regular website, on the New Product Showcase Page. As a teaser, here are three new products from that page — new Alliant Reloder 16 powder, a new Bench-top primer tool from Lee, and a handy Lyman maintenance mat. We are VERY interested in new Reloder 16 propellant. Alliant says RL16 has a burn rate similar to H4350/IMR4350, which would make RL16 ideal for many popular match cartridges.

NEW Product — Alliant Reloder 16 Powder

Alliant Powder Reloder 16 is a propellant that performs consistently across temperature extremes. Its burn rate is slightly faster than Reloder 17’s — well within the 4350 burn speed band. This makes it ideal for traditional hunting cartridges as the .30-06 and .270 Win. It will work as well with 6.5mm target loads and tactical applications where temperature stability is required. The Alliant Powder Reloder 16 contains a de-coppering additive but no toxic DNT or DBP.

NEW Product — Lee Auto Bench Prime

The new Auto Bench Prime from Lee Precision is an easy-to-use bench-mounted priming tool with a large lever that provides good “feel” with plenty of mechanical advantage. The symmetrical design allows for right- or left-hand operation. The Auto Bench Prime includes priming assemblies for large and small primers and a folding tray with a built-in primer-flipping feature. This allows direct filling from large primer boxes. The unit uses special, but inexpensive priming tool shell holders.

NEW Product — Lyman Maintenance Mat

The new Essential Rifle Maintenance Mat from Lyman Products is a smart item that any gun-owner can use. This 10″ x 36″ cleaning/assembly mat features small compartments for tools, parts, and cleaning item. The mat’s firm yet cushioned synthetic rubber surface protects your firearms. The Mainteance Mat’s molded-in compartments keep small parts and screws handy, yet out of the way. The Lyman mat is chemically resistant and cleans up easily.