Rifle accuracy is pointless unless you can see your target and aim precisely. That’s why good optics are so important for precision shooting — from 50 yards out to a mile and beyond. Top quality scopes can be very expensive — you’ll see optics costing $3000 or more on many competition F-Class and PRS rifles. Today’s video showcase covers important “Riflescope Knowledge”, including how to adjust for parallax, and how to properly sight-in your scoped rifle. In addition there’s a helpful video defining Minute of Angle (MOA) plus videos showing how to mount optics correctly (and avoid common scope-mounting mistakes).

Rifle Sight-In Process — Start to Finish

Here Ryan Cleckner shares his process for sighting in a scoped rifle. This helpful video covers the full process: bore-sighting, 25-yard shot confirmation, shooting groups, making adjustments at 100 yards, and finding mechanical zero. Looking for more valuable rifle instruction? Then check out Ryan Cleckner’s book, Long Range Shooting Handbook.

How to Adjust for Parallax

Most precision rifle scopes have parallax adjustment, but what is it and why do you need to adjust it? In this Shooting USA video, John Paul of JP Rifles defines parallax and explains why you need to set parallax correctly for the distance to your target. The video then show how to adjust parallax correctly, a process which should start with the scope’s ocular focus.

Understanding Minute of Angle (MOA)

In this video, Ryan Cleckner explains the measurement term “minute of angle” (MOA) and how to use MOA adjustments on your scope to compensate for bullet drop at varying distances. MOA is an angular measurement, used often in long range shooting, that is 1/60th of one degree of a circle. One MOA represents 1.047″ at 100 yards and 10.47″ at 1000 yards. Want to learn more? Read Ryan Cleckner’s article Understand and Using Minute of Angle.

Scope Mounting: Common Scope-Mounting Mistakes To Avoid

Mounting a scope isn’t a super-complex or highly technical job, but there are ways you can mess it up. This Brownells video explains common pitfalls to avoid when you’re mounting a rifle scope.

1. Make sure the rings don’t touch any part of the turret housing, objective bell, or eyepiece. Any one or combination of those will throw off your shot groups big time. Make sure those rings are clamping ONLY the scope’s main tube.

2. Ensure that the scope rings are properly clamped to the scope base. If you can grasp the scope with one hand and the rifle with the other and there’s play between them, your groups are going to be all over the place! Scope rings come with torque specs for a reason.

3. Make sure there’s clearance between the objective bell and the rifle. No part of the scope should touch the rifle itself. The only nexus between the scope and the rifle should be the scope rings — and they’re not actually part of the rifle. This also applies to a removable lens cover. When it’s on the scope, it should not touch any part of the gun.

4. Don’t mount the scope too low on an AR-15. On most rifles, you do want the centerline of the optic as close to the bore as you can get it. But the AR-15’s stock is on almost the same plane as the top of the receiver, so you need some height on the scope. Otherwise, it’ll be too low for you to look through it.

5. Overtightening the scope rings is VERY BAD. You can actually crush the scope tube and damage the optic beyond repair. Stick to those torque specs! If the rings come with a little wrench, that wrench is all you need to tighten them.

How to Sight In a Riflescope — Vortex Tech Talk

This popular video from Vortex Optics explains how to sight-in a rifle so that the reticle is aligned correctly and the scope is zeroed properly for your intended application/discipline. People need to remember that the sight height established by the rings will affect their zero, as the centerline of the scope is above the centerline of the barrel.

Scope Mounting — Proper Alignment and Torque Values

An improperly installed scope can cost you points at a match. In this video, MDT Pro Shooter Keith Baker explains the simple steps required to ensure your scope is secured properly with the reticle aligned correctly. The video centers on a typical Precision Rifle PRS/NRL optics installation, but the techniques will also work for hunting, varmint, and benchrest rifles.

Rifle accuracy is pointless unless you can see your target and aim precisely. That’s why good optics are so important for precision shooting — from 50 yards out to a mile and beyond. Top quality scopes can be very expensive — you’ll see optics costing $3000 or more on many competition F-Class and PRS rifles. Today’s video showcase covers important “Riflescope Knowledge”, including how to adjust for parallax, and how to properly sight-in your scoped rifle. In addition there’s a helpful video defining Minute of Angle (MOA) plus videos showing how to mount optics correctly (and avoid common scope-mounting mistakes).

Rifle Sight-In Process — Start to Finish

Here Ryan Cleckner shares his process for sighting in a scoped rifle. This helpful video covers the full process: bore-sighting, 25-yard shot confirmation, shooting groups, making adjustments at 100 yards, and finding mechanical zero. Looking for more valuable rifle instruction? Then check out Ryan Cleckner’s book, Long Range Shooting Handbook.

How to Adjust for Parallax

Most precision rifle scopes have parallax adjustment, but what is it and why do you need to adjust it? In this Shooting USA video, John Paul of JP Rifles defines parallax and explains why you need to set parallax correctly for the distance to your target. The video then show how to adjust parallax correctly, a process which should start with the scope’s ocular focus.

Understanding Minute of Angle (MOA)

In this video, Ryan Cleckner explains the measurement term “minute of angle” (MOA) and how to use MOA adjustments on your scope to compensate for bullet drop at varying distances. MOA is an angular measurement, used often in long range shooting, that is 1/60th of one degree of a circle. One MOA represents 1.047″ at 100 yards and 10.47″ at 1000 yards. Want to learn more? Read Ryan Cleckner’s article Understand and Using Minute of Angle.

Scope Mounting: Common Scope-Mounting Mistakes To Avoid

Mounting a scope isn’t a super-complex or highly technical job, but there are ways you can mess it up. This Brownells video explains common pitfalls to avoid when you’re mounting a rifle scope.

1. Make sure the rings don’t touch any part of the turret housing, objective bell, or eyepiece. Any one or combination of those will throw off your shot groups big time. Make sure those rings are clamping ONLY the scope’s main tube.

2. Ensure that the scope rings are properly clamped to the scope base. If you can grasp the scope with one hand and the rifle with the other and there’s play between them, your groups are going to be all over the place! Scope rings come with torque specs for a reason.

3. Make sure there’s clearance between the objective bell and the rifle. No part of the scope should touch the rifle itself. The only nexus between the scope and the rifle should be the scope rings — and they’re not actually part of the rifle. This also applies to a removable lens cover. When it’s on the scope, it should not touch any part of the gun.

4. Don’t mount the scope too low on an AR-15. On most rifles, you do want the centerline of the optic as close to the bore as you can get it. But the AR-15’s stock is on almost the same plane as the top of the receiver, so you need some height on the scope. Otherwise, it’ll be too low for you to look through it.

5. Overtightening the scope rings is VERY BAD. You can actually crush the scope tube and damage the optic beyond repair. Stick to those torque specs! If the rings come with a little wrench, that wrench is all you need to tighten them.

How to Sight In a Riflescope — Vortex Tech Talk

This popular video from Vortex Optics explains how to sight-in a rifle so that the reticle is aligned correctly and the scope is zeroed properly for your intended application/discipline. People need to remember that the sight height established by the rings will affect their zero, as the centerline of the scope is above the centerline of the barrel.

Scope Mounting — Proper Alignment and Torque Values

An improperly installed scope can cost you points at a match. In this video, MDT Pro Shooter Keith Baker explains the simple steps required to ensure your scope is secured properly with the reticle aligned correctly. The video centers on a typical Precision Rifle optics installation, but the techniques will also work for hunting, varmint, and benchrest rifles.

Today, October 20, 2021 Shooting USA TV features the Talladega 600 held this past January. Shooting USA notes: “Competition is back, as America gets back to normal again. For the Civilian Marksmanship Program … the Talladega 600 brought competitors from across the country — all glad to be back shooting. Dozens of competitors are on the line at the Talladega Marksmanship Park, the impressive home range of the CMP.”

Shooting USA noted that this event was a welcome return to normalcy: “After a year of cancelled competition, the Talladega 600 offered days of shooting in matches for most everything you might own, from rimfire to High Power. That had shooters from across the country emptying their gun-safes, and driving down to Alabama to shoot.” After being postponed due to storm damage from Hurricane Zeta, the CMP’s 2020 Talladega 600 event was rescheduled to January 2021.

SHOOTING USA TV Air Times
View Shooting USA on the Outdoor Channel: Wednesdays 9:00 PM (Eastern and Pacific); 8:00 PM Central.
NOTE: If you miss the 10/20/2021 broadcast, you can still view the show on Vimeo for a small 99-cent fee, or just $1.99 per month unlimited. LINK HERE: Shooting USA on Vimeo.

About the Talladega 600 — Southern Classic

The Talladega 600, “A Southern Classic”, is held annually. Though typically fired in November, the 2020 Talladega 600 was rescheduled to January 2021, due to storm damage from Hurricane Zeta. This year, matches included Garand, Springfield, M1A, Carbine and Vintage/Modern rifle events, and versions of prestigious National Trophy Rifle Matches. There was also an Excellence-In-Competition (EIC) match, 4-Man Team match, and .22 Rimfire Sporter match.

NEW Garand Benchrest and Rimfire Sporter Benchrest Matches
Two new types of matches were conducted at January’s Talladega 600: a Benchrest Garand Match and a Rimfire Sporter Benchrest Match. Competitors at these events can use sandbags to support their rifles. The Benchrest Garand match was very popular, and is likely to become a regular event.

Pistol Matches Were Popular
The Talladega 600 included .22 Rimfire EIC and Service Pistol EIC matches, along with As-Issued 1911 and Military & Police matches.

State-of-the-art Kongsberg target systems are used at the CMP’s Talladega Marksmanship Park.

About Talladega Marksmanship Park
The 500-acre CMP Talladega Marksmanship Park is one of the most advanced outdoor shooting facilities in the Western Hemisphere. The facility includes a 600-yard rifle range, a 100-yard multi-purpose range, and a 50-yard pistol range, equipped with Kongsberg electronic targets and scoring monitors. Since the 54 targets at each line register hits and calculate the scores instantly, no pit duty is required at Talladega. The park regularly hosts rifle, pistol and shotgun events throughout the year.

Today, Wednesday April 7, 2021, Shooting USA TV features the Hornady Precision Hunter Steel Challenge. This is a unique, one-of-a-kind match set in 2000 acres of natural terrain at the Cameo Shooting Complex in Colorado. The match replicates long-range hunting challenges, with steel targets sized to simulate the vitals of western game animals. Some 135 competitors engaged steel targets in 20 challenging stages.

Match Director Scott Satterlee says, “This is as close as it can get to mountain hunting. We have vital-sized targets out there. They are 12-inch squares turned to diamonds which are really difficult to hit”.

SHOOTING USA TV Air Times
View Shooting USA on the Outdoor Channel: Wednesdays 9:00 PM (Eastern and Pacific); 8:00 PM Central.
NOTE: If you miss the 1/13/2021 broadcast, you can still view the show on Vimeo for a small 99-cent fee, or just $1.99 per month unlimited. LINK HERE: Shooting USA on Vimeo.

The inaugural Hornady Precision Hunter Steel Challenge took place in Colorado August 8 and 9. This unique competition involved lots of hiking with various shooting positions in challenging natural terrain. The unique match was hosted at the Cameo Shooting Complex near Grand Junction, CO.

There were 135 registered competitors — quite a turn-out for a physically demanding match in a fairly remote location. Congrats to Heavy Class and Overall Winner Brian Black who topped the field with 140 Match points (100% of possible). Brian shot a 6.5×47 Lapua with Berger 6.5mm 140gr Hybrids. Brian’s winning rig featured a Lone Peak Arms Fuzion action, Benchmark barrel, and XLR Element chassis.

The Hornady Precision Hunter Steel Challenge tests a rifleman’s fitness and skills as marksman and hunter. The stages were blind with a 4-minute time limit to move to the shooting area, locate, range, and engage targets. Shooters could choose between two rifle weight classes (light or heavy) and had to meet a minimum power factor cartridge requirement that helped even the playing field. The match featured a diverse course of fire with a good mix of prone and natural terrain shooting positions.

CLICK HERE for 100 More Match Photos (Facebook Album) »

Hunting Ammo Tested by Shooting USA
In this same episode, Shooting USA tests a variety of Hornady hunting ammo offerings on the G.A. Precision private gun range in Missouri. (We’d love to have our own private range like that!) Jason Hornady says his company starts the design of all hunting ammunition with bullet selection: “For us it started with the bullet … for us the bullet still makes the cartridge.”.

For decades, ShootingUSA has been a leading video resource for the shooting sports and hunting. This popular cable TV show covers shooting matches, and provides expert information on precision shooting, gun maintenance, optics, and defensive firearms use. Here are five interesting videos all worth watching. Learn about wind-reading, gun maintenance, and optics.

1. Reading the Wind — SGT Sherri Jo Gallagher of USAMU

Sergeant Sherri Jo Gallagher of the U.S. Army Marksmanship Unit (USAMU) shows us how to read the wind in given conditions, and how to apply your wind assessment when aiming down-range. During her time with the USAMU, Sherri won the National High Power Championship, and was the first woman in history to earn the U.S. Army “Soldier of the Year” honors. Sherri comes from a legendary family of shooters — she was raised by Ace Marksman Mid Tompkins and mother Nancy Tompkins, the first female to win the NRA National High Power Championship.

2. Field-Stripping and Cleaning AR-Platform Rifles

Let’s face it — Black Rifles run dirty. On AR-platform rifles, the gas system blows carbon and powder residues back into the action and bolt carrier group. Accordingly, you need to clean ARs early and often, and you should fully disassemble the bolt carrier to access parts and recesses which accumulate greasy lube and hard carbon. This helpful video shows how to field-strip and clean AR-platform rifles. If you own an AR, this is definitely worth viewing. With over 1.9 million views, this is the #1 most-watched video on Shooting USA’s YouTube Channel.

2. MOA Defined — Jim Scoutten Explains Minute of Angle

Minute of Angle (MOA) — this is the most common measurement of group size, and hence rifle accuracy. You hear about shooters hoping to shoot 1 MOA or “half-MOA”, but many folks could not give you a precise definition. In fact MOA is an angular measurement that equates to one-sixtieth of one degree of Arc. In this video, host John Scoutten defines MOA. He then demonstrates how MOA translates to accuracy on target. He demonstrates one-half-MOA accuracy with a Les Baer Custom rifle. This company offers a three-shot, half-MOA guarantee for its rifles.

4. How to Adjust for Parallax

Most precision rifle scopes have parallax adjustment, typically a knob on the left side of the scope. but what exactly is “Parallax” and why do you need to adjust optics to ensure the parallax setting is optimal? In this Shooting USA video, John Paul of JP Rifles defines parallax and explains why you need to set parallax correctly for the distance to your target. The video then shows how to adjust parallax correctly, a process which should start with the scope’s ocular focus.

5. How to Mount a Riflescope

When mounting a scope you want to use quality rings, and ensure that the scope is leveled properly. In addition, you need to adjust the fore/aft position of the scope so that eye relief is correct. Ideal scope position may be different when shooting from the bench vs. shooting prone. In this Shooting USA video John Paul of JP Rifles reviews scope mounting basics.

Rifle accuracy is pointless unless you can see your target and aim precisely. That’s why good optics are so important for precision shooting — from 50 yards out to a mile and beyond. Today’s premium scopes can be very expensive — you’ll see optics costing $3000 or more on many competition F-Class and PRS rifles. This article covers important “Riflescope Knowledge”, including how to adjust for parallax, and how to properly sight-in your scoped rifle. In addition there’s a helpful video defining Minute of Angle (MOA) plus two videos showing how to mount scopes.

Rifle Sight-In Process — Start to Finish

Here Ryan Cleckner shares his process for sighting in a scoped rifle. This helpful video covers the full process: bore-sighting, 25-yard shot confirmation, shooting groups, making adjustments at 100 yards, and finding mechanical zero. Looking for more valuable rifle instruction? Then check out Ryan Cleckner’s book, Long Range Shooting Handbook.

How to Adjust for Parallax

Most precision rifle scopes have parallax adjustment, but what is it and why do you need to adjust it? In this Shooting USA video, John Paul of JP Rifles defines parallax and explains why you need to set parallax correctly for the distance to your target. The video then show how to adjust parallax correctly. a process which should start with the scope’s ocular focus.

Understanding Minute of Angle (MOA)

In this video, Ryan Cleckner explains the measurement term “minute of angle” (MOA) and how to use MOA adjustments on your scope to compensate for bullet drop at varying distances. MOA is an angular measurement, used often in long range shooting, that is 1/60th of one degree of a circle. One MOA represents 1.047″ at 100 yards and 10.47″ at 1000 yards. Want to learn more? Read Ryan Cleckner’s article Understand and Using Minute of Angle.

How to Mount a Riflescope

When mounting a scope you want to use quality rings, and ensure that the scope is leveled properly. In addition, you need to adjust the fore/aft position of the scope so that eye relief is correct. Ideal scope position may be different when shooting from the bench vs. shooting prone. In this Shooting USA video John Paul of JP Rifles reviews scope mounting basics.

Scope Mounting on a PRS Precision Rifle

Here the MasterPiece Arms (MPA) Academy experts show how to mount a scope on a PRS-type tactical rifle. Special considerations for tactical shooters are discussed. The video also shows recommended tools for scope mounting operations.

Want to see the best semi-auto pistol and revolver shooters on the planet in action? Then check out Shooting USA TV later today. Today’s broadcast features in-depth coverage of the 2017 Bianchi Cup. Shooting USA’s John Scoutten and Julie Golob report from the NRA Action Pistol Championship, better known as the Bianchi Cup, after one of its founders, John Bianchi.

ShootingUSA AIR TIMES FOR 2018 (Outdoor Channel)
Wednesday 9:00 PM Eastern and Pacific, 8:00 PM Central
NOTE: Shooting USA is listed as a one-hour show in your cable menu.

In the past 30 years the Bianchi Cup has become the richest handgun event in the world, with cash and prizes for the best scores on four stages of fire. Shooting USA will spotlight top male and female Bianchi Cup competitors in both wheelgun and and semi-auto pistol divisions. Along with North American shooters, the Bianchi Cup draws top handgun competitors from around the globe.

In 2017 shooters from as far away as Australia, New Zealand, and Japan traveled to Columbia, Missouri in search of the perfect 1920 match score. Each round is the aggregate of the four (4) fired events: Practical, Barricade, Falling Plate, and Moving Target Events. Each of the four events requires 48 shots to complete. 480 points possible on each event. Three of the four are scored on the NRA tombstone P1 target. You must hit in the 10-ring or inner X-Ring on EVERY shot to shoot a “clean” 1920.

27 Years ago Doug Koening set the standard with a 1920. Since then, every Open shooter knows that he or she must “clean” this match (i.e. score a “1920”) to have a chance to take the title of “Champion”. The X-Count is the tie-breaker.

In this video, 18-Time Bianchi Cup Winner Doug Koenig demonstrates Fast Follow-up Shots

Here are the top four women shooting the Practical Event during the Colt Championship Final. From top: 2017 Bianchi Women’s Champion Cherie Blake, third place SFC Katie Bahten, second place Anita Mackiewicz, and fourth place Jessie Duff. Shooting Sports USA Photo

This Bianchi Cup Preview offers the perspective of newcomers to the game…

Varmint Benchrest Silhouette Basics
In 2010, the Ridgway Rifle Club combined Metallic Silhouette and 1000-yard Bench Rest into one exciting new discipline. Steel targets are arrayed in banks of five at four distances. The targets are set up as follows: Crows at 850 yards, Ground Hogs at 900 yards, Bobcats at 950 yards, and Coyotes at 1000 yards. Just dinging a target is not enough — to count as a “hit”, the target must fall down.

Ridgeway allows two classes of guns, Heavy Class with a maximum weight of 17 pounds, and Standard Class with a maximum weight of 12 pounts. Both classes must otherwise conform to the Light Gun rules for the Original 1000-Yard Bench Rest Club in Williamsport, PA.

Varmint Silhouette West of the Mississipi
Clubs in other states also host Varmint Silhouette matches (or some variant thereof). One of the longest-running and most popular Varmint Silhouette matches is held the first weekend of every month at the Pala Range, in San Diego County, California. At Pala, competitors shoot at “critter” targets placed at five yardages: 200 Meters – Field Mice (“pikas”); 300 meters – Crows; 385 meters – Ground Squirrels; 500 meters – Jack Rabbits; 600 yards – Prairie Dogs

Fun Weekend for the Whole Family
At Pala, there’s a deluxe Indian Casino/Spa nearby. So don’t hesitate to bring the wife. If she’s not a shooter, she can enjoy a fancy brunch or spa treatment while you’re having fun mowing down metal critters. Pala is a 30 minutes from the Pacific Ocean and beautiful beaches, so you can make this a weekend holiday for the whole family — kids love sand and surf.

World’s Best Wheelgunners
The IRC, held May 31 through June 2, 2013, was the highlight of this year’s revolver shooting season. More than 240 of the world’s top revolver shooters negotiated their way through 12 stages of fire putting more than 70,000 rounds down range. Competition at the IRC is divided into three divisions: Classic, Iron Sights, and Open. Classic Division competitors use six shot revolvers and speed loaders, no moon clips allowed. In the Iron Sight Division, shooters are allowed up to eight rounds in the gun, with moon clips to speed reloads. Traditional iron sights are required. The Open Division includes eight-shot cylinders, moon clips, barrel porting, or compensators, and electronic optics.

VIEW 2013 IRC Results

Along with the adult classifications, the IRC features divisions for Junior shooters. The junior events are always crowd-pleasers. Some of these youngsters are definitely future champions in the making. The video below shows the 2009 IRC Junior Shoot-Off for the overall Junior Title.

Trevor Baucom’s story is the focus of this week’s episode of Shooting USA, which airs tonight, June 13th, on the Outdoor Channel. This episode covers Baucom’s journey from a Blackhawk pilot/flight leader flying assault missions, to become the shooting industry’s first professionally-sponsored disabled shooter.

While serving with the Army’s 5th Battalion, 101st Combat Aviation Brigade in Afghanistan, Baucom was paralyzed (from the waist down) in a helicopter crash. He was then medically discharged after 13 years of distinguished service. During his rehabilitation process, Baucom got involved in the shooting sports (Read Full Story). In short order, Baucom showed remarkable results, and now he is a sponsored member of Team Smith & Wesson. The first pro shooter who competes from a wheelchair, Baucom has also earned sponsorship from Atlanta Arms and Ammo, Ithaca Gun Company, Safariland, and Nevco Targets.

Baucom now serves as an inspiration for other wounded warriors as well as all disabled shooters. Trevor has competed in the Bianchi Cup, NRA Action Pistol events, the USPSA-operated Steel Challenge, and the IDPA Indoor Nationals. More shooting sports are on his schedule in the months ahead, including Trap and Sporting Clays, and NRA Bullseye Competition. Through this Shooting USA “Special Edition”, viewers will witness the positive impact Baucom has had on those around him. From Baucom’s return to the air as part of a special honor flight at Fort Campbell, KY, to his first competition at the NRA Bianchi Cup, this story gives credence to the “never-say-quit” attitude that is the hallmark of every United States serviceman and servicewoman. Watch Baucom’s passage from combat veteran to professional shooter today, June 13th on the Outdoor Channel. The show airs at 3 pm, 8 pm, and midnight EST.

Jim Scoutten Explains the Back-Story
To learn more about Trevor Baucom, read The Story Behind Trevor’s Story by Jim Scoutten. Jim explains: “The credit for this story really goes to an accident of our office / studio location. We share a large office-warehouse building with a high-end physical therapy company. That’s where Chief Warrant Officer Trevor Baucom was heading in his wheelchair when we first struck up a conversation. I invited Trevor and his flying buddy, Apache Pilot CW3 Jeff Lamprecht, who had driven Trevor down from Clarksville, TN, in to tour our studio and offices and have a look at our inventory of firearms.” READ MORE…