NOTE: If you have the PDF reader installed in your browser, the Graf’s Chart may open in a new tab when you click on the image above. To save the three-page PDF file to your computer or device, click the Floppy Disc icon that appears in the lower right (after the PDF file opens). Here is the direct link: http://www.grafs.com/uploads/technical-resource-pdf-file/12.pdf.

Note: There are a few issues which arise from brass sources. For example, if you are making 22 BR from Lapua brass, you’ll want a small rifle primer. And the 6.5 Creedmoor is not listed (it uses Large Rifle primers for most brass, but Small Rifle primers for Lapua brass). There are a couple other oversights, so we recommend that you double-check your brass before you buy a truckload of primers.

6.5 Creedmoor vs. Other Mid-Sized 6.5mm Cartridges
The 6.5 Creedmoor is a very popular cartridge with the tactical and PRS crowd. This mid-size cartridge offers good ballistics, with less recoil than a .308 Winchester. There’s an excellent selection of 6.5mm bullets, and many good powder choices for this cartridge. When compared to the very accurate 6.5×47 Lapua cartridge, the 6.5 Creedmoor offers similar performance with less expensive brass options. For a tactical shooter who must sometimes leave brass on the ground, brass cost is a factor to consider. Here’s a selection of various 6.5mm mid-sized cartridges. Left to right are: 6.5 Grendel, 6.5×47 Lapua, 6.5 Creedmoor with 120gr A-Max, 6.5 Creedmoor with 142gr Sierra MK, and .260 Remington.

When asked to compare the 6.5 Creedmoor to the 6.5×47 Lapua, Rifleshooter.com’s Editor stated: “If you don’t hand load, or are new to precision rifle shooting, get a 6.5 Creedmoor. If you shoot a lot, reload, have more disposable income, and like more esoteric cartridges, get a 6.5×47 Lapua. I am a big fan of the 6.5×47 Lapua. In my personal experience, the 6.5×47 Lapua seems to be slightly more accurate than the 6.5 Creedmoor. I attribute this to the quality of Lapua brass.” But now that Lapua is producing top-quality 6.5 Creedmoor brass with small primer pockets, we could have a “second generation” 6.5 Creedmoor that rivals ANY mid-sized cartridge for efficiency AND accuracy. We will soon know how well the 6.5 Creedmoor cartridge performs with Lapua brass.

The first shipment of Lapua 6.5 Creedmoor brass has arrived in the USA. It features a small flash hole and small primer pocket. We have some for testing…

New Lapua 6.5 Creedmoor Brass Field Tests Soon
Our friends at 65Guys.com will be testing the new Lapua 6.5 Creedmoor brass next week. The goal will be to determine if Lapua’s new Small Primer Pocket/Small Flash Hole brass allows higher velocities than American-made brass (Hornady specifically). In addition the 6.5 Guys want to see how well the new Lapua brass holds up after dozen (or more) firing cycles. They’ll hammer the new brass pretty hard to see how it fares with repeated stout loads. Stay tuned…

Here are three tables from the Sierra Bullets Reloading Manual (5th Edition). IMPORTANT — This is just a sample!! Sierra has load data for many other 6.5mm bullet types, including FB, Spitzer, SBT, HPBT, and Tipped MK from 85 grains to 142 grains. To view ALL 6.5 Creedmoor DATA, CLICK HERE.

INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.

INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.

INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.

The most hotly-anticipated cartridge brass, the new-for-2017 6.5 Creedmoor cases from Lapua, arrived late last week at Graf & Sons. With the strength and uniformity for which Lapua brass is famous, this new brass should definitely “raise the bar” for 6.5 Creedmoor and 6mm Creedmoor shooters. Note — the new Lapua 6.5 Creedmoor brass features a small flash hole and small primer pocket. As of 9:00 am Monday morning this brass is in stock at Grafs.com priced at $119.99 per 100-ct box, with a max order of five (5) boxes.

UPDATE: The 6.5 Creedmoor brass sold out after we posted this story. But there will be more coming. You can ask Graf’s to be notified as soon as the next shipment arrives.

TECH TIP: For those who have been loading Hornady or other-brand 6.5 Creedmoor brass with large primer pockets and large flash holes, you may need to reconfigure your reloading tools. Check your sizing die — you may need to change to a smaller-diameter decapping rod. In addition you’ll need to use a small primer size “pusher” on your priming tool.