Today we feature a big-caliber rifle used for the most prestigious Extreme Long Range (ELR) competition, the King of 2 Miles. This rifle was built for Derek Rodgers, a talented shooter with amazing credentials. An F-TR World Champion, Derek is the only shooter to have won the F-Open USA National Championship AND the F-TR USA National Championship. Derek also won the 2017 King of 2 Miles competition. Last Sunday GunDay we featured the 33XC rifle used by Clay Rhoden to capture the inaugural American King of 1 Mile competition. That story was quite popular, so this Sunday we offer an even more powerful rig, Derek’s .416 Barrett with a massive 40″ barrel.

Derek Rodgers won the King of 2 Miles competition in 2017, so he knows all about Extreme Long Range (ELR) shooting. While Derek won his 2017 KO2M title shooting the .375 CheyTac cartridge, Derek decided that something even bigger was in order. So Derek commissioned this impressive ELR rifle chambered for the jumbo .416 Barrett cartridge. This big round drives heavy Cutting Edge solid bullets from 475 to 550 grains in weight.

Here’s the Big Rig that delivers those .416-caliber projectiles. This monster rifle weighs 40+ pounds and sports a 40″ Bartlein barrel — more length for more velocity. Derek’s ELR rifle features a McMillan Beast 2 stock, BAT EX action, and Nightforce ATACR 7-35x56mm scope. Derek explained why he moved up to a bigger caliber: “I built a new rifle with the anticipation of seeing impacts easier. It was not just a larger caliber being more effective on hitting ELR targets, but rather hoping that a missed shot would have a much larger impact. Impacts beyond a mile become harder to see due to terrain and vegetation. So any added dust or splash erupting from the earth is a decisive benefit over an equally-accurate smaller caliber.” Here is Derek’s full report on his .416 Barrett rifle.

Derek Rodgers Campaigns a .416 Barrett

Report by Derek Rodgers
Cartridge Choice — I chose a standard .416 Barrett cartridge as it allows for bullets up to and slightly exceeding 550 grains. It really does bridge the gap between the .375 variants and a 50 BMG. There are several great solid ELR bullet options from manufactures like Cutting Edge that range from 475-550 grains. These offer a variety of extremely high BC options for barrels that have different twist rates. Most loads will utilize the slowest burn rate powders commercially available. Good options are Vihtavuori 20N29, RL50, H50BMG and other powders with a similar burn rate.

Shooting the .416 — Tamer than Expected
An initial observation is that the rifle is very controllable and feels much like a larger F-TR gun. The rifle weighs 40+ pounds, balanced and stays on target very well. The recoil is manageable and linear. This seems to give a straight rearward impulse that does not affect positioning. This allows for quick repositioning into battery and faster follow-up shots.

Image courtesy ELR competitor Corbin Shell.

Rifle Details — BAT EX Action, Bartlein 40″ Barrel, McMillan Beast 2 Stock
Derek’s .416 Barrett ELR Rig features a BAT EX action with a Bix’N Andy trigger. Out front is a gigantic 40″ long, 1:9″-twist Bartlein barrel fitted with a Terminator T5 muzzle brake. The handsome McMillan Beast 2 stock combines a lower center of gravity design with a higher butt location. Given that high butt geometry, McMillan cleverly fitted the higher buttpad with a port allowing the cleaning rod to pass through (see photo below). On top is a Nightforce ATACR 7-35x56mm scope in NF rings on a +60 MOA rail, with Holland 34mm bubble level. The stock is supported by a Phoenix bipod and rests in an Edgewood bag designed for the McMillan Xit F-TR stock.

Note the extended Buttpad height. That helps with recoil in prone position. This McMillan Beast 2 stock includes a pass-through hole for the cleaning rod.

Derek Rodgers Wins 2017 Ko2M with 3368-Yard Hit
Back in 2017, Derek Rodgers won the King of 2 Miles Competition at Raton, New Mexico. Derek, shooting with Team Applied Ballistics, was the first KO2M marksman in history to hit the target at the maximum 3368-yard (1.91 mile) distance. Here’s that historic shot:

At the 2017 K02M, with his McMillan-stocked .375 CheyTac rifle, Derek shot brilliantly from the start. He was perfect — without a miss — at the first three yardages: 1543, 1722, and 1888. He had some misses at 1953 and 2667 yards, but then he out-shot all competitors at 3028 yards, going two for five. No other shooter managed a single hit at 3028 yards. Then it all came down to the big one — the last (and greatest) challenge, the target at 3368 yards (1.91 miles). Derek nailed it… and the celebrations began.

Here’s Derek with his 2017 Ko2M-winning .375 CheyTac rifle. Now he’s stepped up in bore size.

Gunsmithing by Blake Barrel and Rifle in Arizona
Derek’s rifle was built and chambered by Bryan Blake of Blake Barrel and Rifle in Phoenix, Arizona. The chambering was done with a Manson Precision reamer. Derek explains: “Bryan and his family have been in the machine shop business for several generations and have the expertise and equipment to handle larger barrel diameters associated with F-Class to ELR-type rigs. I tried to consider all angles and potential pitfalls that might occur during the building process. However, Bryan added his own touches to make the project his own. He truly created a work of art and supplied a turn-key rifle that is meticulously built from the inside out and looks as great as the tolerances it holds.”

Berger Bullets has created some impressive solid bullets for Extreme Long Range (ELR) shooting. These ultra-long, lathe-turned solids were unveiled at SHOT Show 2019, and they should reach Berger dealers by Mid-April this year. To test their consistency and develop refined BC numbers, the Applied Ballistics test team has braved cold winter weather to test Berger’s new 379 grain solids. The results have been impressive.

Bryan Litz, Applied Ballistics founder, tests 379gr Bergers in .375 EnABLER rounds.

The Applied Ballistics testers have loaded the new Berger solids in an innovative .375-Caliber cartridge called the .375 EnABELR. This is slightly shorter than a .375 CheyTac so it allows the round to mag-feed. The brass is made by Peterson. The testers report: “We’ve been loading and shooting a pile of .375 EnABELR this month. The Berger 379gr Solids are proving to be incredibly consistent. Here’s a 10-shot string for one of our guns, shots number 931-940.”

The .375 EnABELR is achieving impressive velocities — 2990 FPS — with the 379-grainers from a 30″ barrel. The test team states: “We’ve been shooting [a 30″-long] 1:7″ twist which works good, but are going to try some 1:8″ and 1:9″ also”.

The .375 EnABELR Cartridge — Big and Fast
The .375 EnABELR cartridge was designed to offer .375 CheyTac performance in a slightly shorter package: “The problem with the .375 CheyTac is that, when loaded with the highest performance .375 caliber bullets (379-407 gr Berger Solids, and the 400-425 grain Cutting Edge Lazers) the round is not magazine feed-able in any action that’s sized for CheyTac cartridges.

“Knowing the .375 CheyTac produced substantial performance, and that it was just too long for magazine feeding, made it easy to converge on a design for the .375 EnABELR. We just had to make the case short enough to achieve magazine length with the desired bullets, while adding a little more diameter to keep the case capacity similar to the .375 CheyTac. The resulting basic shape is quite similar in proportions to the successful .338 Norma Magnum Cartridge which, interestingly, was selected as the cartridge for General Dynamics Lightweight Medium Machine Gun (LWMMG).”

Brass Source — Purchase the Peterson-made .338 EnABELR and .375 EnABELR brass through the Applied Ballistics WebStore. Price for both .338 EnABELR and .375 EnABELR is $125.00 for 50 cases.

Story based on report by Paul Phillips of Global Precision Group
Extreme Long Range (ELR) shooting continues to evolve, with new forms of competition “pushing the envelope” of marksmanship (and ballistics) at distances out to 4900 yards (2.8 miles) and beyond. The latest big-time ELR shooting match was the World’s Longest Shot Challenge (WLSC) in Texas. This match was held at the Valdina Ranch, 1700+ acres of gorgeous hill country property, located about 1.5 hours west of San Antonio, Texas. The event attracted 28 shooters competing in four classes. Each competitor could be supported by a spotter and a wind coach, shooting as a three-person team.

Key “Take-Aways” from the 2018 WLSC Match:

1. Prototype Berger .375 Caliber Bullet is a Winner
The new .375 caliber monolithic Berger bullet designed by Bryan Litz was used by the first and second place finisher in the above .338 Caliber class. It performed great and the ultra-high BC was confirmed.

2. Team Applied Ballistics Dominated
The combined Applied Ballistics Team made first-round impacts at 1760, 2000, 2200, and 2400 yards. Also, 11 out of the 12 impacts total at 2200 yards belonged to Team AB. And Team AB’s Chris Palka had the top score overall, in his first-ever major ELR competition. That demonstrates how well the AB ballistics solutions work. By yardage, Chris recorded 68280 points total, as follows: 1760×6, 2000×10, 2200×9, 2400×3, 2680×4.

Christopher Palka (Team AB), shooting his first-ever ELR match, finished First Overall. Tactiholics Photo.

3. Got Doppler? Advanced Radar Technology for ELR
To shoot at these extreme ranges, you need rock-solid BC information on your projectiles. Luckily Applied Ballistics brought a Doppler Radar and allowed competitors to shoot their ammo to give them personalized ballistic information.

NOTE: There was also a fourth class at the WLSC, the “Above .338 Factory Class” (.50 BMG) with Jay Divorsky scoring 14560.

WLSC Match Procedures and Scoring:
Competitors shot with time limits at each distance: 5 minutes to make 5 shots at each plate. Hits on steel scored points, with a big premium on first-round hits. The point values (for hits) were based upon standard ELR practice: 5 times the distance on the first shot, 4 times the distance on the second shot, and so on. In this ELR match each team may have three members: Shooter, Wind Coach, and Spotter.

Paul Phillips reported: “After drawing names randomly for shooting order, on Day One we shot 36″ metal plates at 1760, 2000, 2200, and 2400 yards. The second day was elimination day — you had to make impact on each target at least once to advance to the next distance. These targets started at 2680 ranging out to 4900 yards. We had winds from 4-8 mph on the first day and 6-15 mph on the second day which made it very challenging.”

Proof in the Shooting — AB Solvers and Berger Bullets
Bryan Litz of Applied Ballistics stated: “This event was a successful test of several new things. Berger’s prototype .375 caliber solid bullets worked well in numerous guns and tracked perfectly to the most distant targets. Radar measurements of these new bullets indicate extraordinary performance as well. The AB Team also had a couple new staff members shooting their first ELR competition (Chris Palka and Chris Wiencke) who both did well with Chris Palka actually winning the event. This match was a successful demonstration of the science of accuracy being used to put rounds on target. The thing about science, is that it works the same for everyone. The ballistic software and Custom Drag Model (CDM) data that we used to put first-round hits on targets out to 2400 yards is the same software that’s available to everyone in the AB devices (Kestrel, Sig Kilo, Garmin Fortrex) and Mobile Apps.”

The AB ELR Team dominated the Podium in the above .338 Non-Factory Class. Chris Palka was high scorer followed by Paul Phillips (Second) and Chase Stroud (Third). The top two finishers were using Applied Ballistic Weapon Division Rifles sending the new Berger .375-Cal solid bullets designed by Bryan Litz. The third place finisher shot a .375 CheyTac with 400 grain Cutting Edge Laser bullets.

In the .338 and under Factory Class there were mostly .338 Lapua Magnums. These .338s did very well and two out of the three shooters made it to the two-mile plate. The final standings in the 338 and under Factory Class: Peter Contacos (first), Paul Phillips (second), Chris Wiencke (Third). Both Paul and Chris were shooting 300 grain Berger bullets.

Title Sponsor ELRHQ, a McMillan company, brought tables full of gear. Everything was on display: scopes, bipods, mats, bags, triggers, actions, brakes, stocks, LabRadars, TargetVision target cams, and more. ELRHQ.com is a great one-stop online vendor with the latest and greatest gear for those interested in the ELR discipline and precision shooting.

The match was organized by Travis Walla who did a great job. The event ran smoothly and shooters say the Texas BBQ was great. Travis posted: “We had an awesome event, thanks to all of our sponsors that helped make this event a huge success. We also had a awesome opportunity for those that shot this match — they were able to shoot across the Oehler Research 88 and Applied Ballistics LLC radar at the same time out to 2400 yards on Saturday afternoon. Thanks again…”

Getting started in long-range shooting? Need some pointers on gun set-up and hardware options? Bryan Litz of Applied Ballistics has created a helpful series of videos for the NSSF covering long range shooting. Bryan, a past F-TR Long-Range National Champion and Chief Ballistician for Berger Bullets, knows his stuff. His Applied Ballistics squad was the winning team at the 2016 King of 2 Miles event. Here are four (4) videos, each covering a topic of interest for long-range shooters. Running 3-4 minutes each, these videos can help you get started, and invest wisely when acquiring your next long-range rifle, scope, and accessories.

Long Range Precision — The Keys to Success

TIP for Plotting Long Range Trajectories: You want to know the true, actual ballistic coefficients of your loads. The BCs listed by manufacturers for their projectiles may be somewhat unreliable — the real BC could be higher or lower (and BC can change with velocity). That can result in problems at longer distances. Using sophisticated equipment, Applied Ballistics has measured true BCs for hundreds of projectiles. Plugging these verified numbers into your Ballistics App can improve your hit percentage at long range.

Tools of Choice — Purpose-Built Long Range Rifles

TIP for Choosing a Rifle: When you’re selecting a rifle for long range shooting, it’s important to understand your application and objectives. The applications for long-range shooting can be very refined. You have to select all the details of your application to select the correct rifle. Here are two examples — a semi-auto AR-platform rifle with scope and a bolt-action Fullbore (Palma) rifle with aperture sights. There are many other long range disciplines — F-TR for example. The F-TR rig uses a bipod and rear bag and a scope. To be competitive, a modern F-TR rig should shoot well under half-MOA.

Equipment Advice — Upgrading Your Hardware

TIP for Upgrading Your Rifle: At some point factory rifle owners will recognize weak links in the equipment chain. You can run that factory rifle for quite some time, but the barrel is eventually what’s going to hold you back. The twist-rate may not be high enough to stabilize the high-BC bullets. So the first thing you’re going to want to upgrade is the barrel. You want to get a fast twist-rate barrel with a chamber that is optimized for the bullet you’ll be shooting. A good-quality, custom barrel will be easier to clean, and it will improve the overall accuracy and precision of your shooting.

Big Boomers — Large-Caliber Rifles for Long Range

TIP for Shooting Hard-Recoiling Rifles: Bryan Litz defines “Large Caliber” as .338 caliber and bigger. These rifles can shoot heavy bullets with high BCs. However there are some trade-offs. It can be hard to maintain good fundamentals of marksmanship (trigger control, sight alignment) when you’re fighting heavy recoil and burning 100+ grains of powder. You’re dealing with the challenges that high energy brings. You want a muzzle brake with any cartridge .338 or above. Also, when considering lathe-turned solid bullets, remember that these typically have less sectional density compared to lead-cored bullets with similar profiles. This affects ballistics as well as recoil energy.

Warner Tool Company (WTC) has introduced a new series of “Flat Line” ultra-high-BC bullets. These sleek, lathe-turned solids are some of the most perfectly-streamlined projectiles ever sold. The Ballistic Coefficients (BCs) of Flat Line projectiles are as much as 20% higher than other match bullets of similar caliber and weight. For example, the .30-caliber 200gr Flat Line bullet has a claimed G1 BC of 0.780. Compare that to 0.555 for the Sierra 200gr MatchKing and 0.622 for the Berger 200gr Hybrid.

The new Flat Line bullets all show extremely high Ballistic Coefficients for their weights:

WTC also claims that Flat Line bullets can be launched at faster velocities than other bullets of similar caliber and weight. In its marketing materials, WTC says that Flat Line bullets deliver “Higher velocities when compared with projectiles in its weight class [and] much higher velocity when compared with projectiles of similar BC.” For example, WTC claims that “the 155.5gr .30-caliber bullet has the velocity of a 125-135gr bullet [with] the BC of a 185-200gr bullet.” It will be interesting to see if these claims can be verified in field tests.

Here are comparative G1 BCs for a variety of large .30-caliber bullets:

Cal Zant of the Precision Rifle Blog has obtained some early-production Flat Line bullets from their designer, Josh Kunz. Zant has written a lengthy article explaining the design and features of the new Flat Line bullets. If you are considering ordering some of these new lathe-turned solids, you should definitely read Zant’s report.

READ Flat Line Bullets Product Report in Precision Rifle Blog.

These bullets were designed by Aerospace engineer Josh Kunz using advanced computational fluid dynamics (CFD) to simulate supersonic air flow around the bullets. Through the use of advanced modeling and precision CNC machining, Kunz has developed extremely uniform, ballistically “slippery” bullets that fly faster and flatter than other projectiles of similar weight/caliber.

Premium Pricing: Flat Line Bullets Cost $125 to $165 per Hundred
These new Flat Line solid bullets are pricey. The 155s cost $1.25 per bullet and the price goes up from there. If you need large quantities of projectiles for a week-long match, the cost can be daunting. One hundred fifty of the 200-grainers will set you back $435.00! Here is a price list for the new Flat Line bullets. All quantities are in boxes of 50. Pricing is introductory and subject to change.

Is the cost worth it? When you look at the overall expense of attending a major match, and the fact that the top places in big matches are sometimes are decided by a single point (or X-Count), some competitors will spend the extra money for these ultra-high BC solids.

For more details or to place an order, visit Warner-Tool.com, call WTC at (603) 352-9521, or email info [at] warner-tool.com. CLICK HERE for WTC Flat Line Bullets Data Sheet (PDF).

Photos and Comparison Chart copyright PrecisionRifleBlog.com. Story tip from EdLongrange.

The coverage of the Bullet Database is amazing. Manufacturers in the database include: A-Square, Barnaul, Barnes, Berger, Brenneke, Calhoon, CDP, CheyTac, ColoradoBonded, CT, DAG, David Tubb, Delsing, DEWC, DKT, DTK, DYN, Federal, Fiocchi, FMJ, FN, Fortek, FP, Freedom, Frontier, GECO, Gian-Marchet, GPA, GS-Custom, H&N, Hawk, HeviShot, Hirtenberger, Hornady, HP, Igman, IMI, IMI-Samson, Impala, JDJ, JLK, Klimovsk, Lapua, LEADEx, LEE, Lehigh, LIMA, LostRiver, LYM, MEN, Mil, Norinco, Norma, NorthFork, Nosler, PMC, PMP, Powell, PrviPartizan, Rainier, RCBS, Reichenberg, Remington, RN, RNFP, RUAG, RWS, Sako, Sellier-Bellot, Shilen, Sierra, Sinterfire, Speer, Stoklossa, SWC, Swift, Swiss, The Gun Haus, TMJ, WestCoast, Winchester, WM-Bullets and Woodleigh.

The database is great if you’re looking for an unusual caliber, or you want a non-standard bullet diameter to fit a barrel that is tighter or looser than spec. You’ll find the popular jacketed bullets from major makers, plus solids, plated bullets, and even cast bullets. For those who don’t already own QuickLOAD software, this is a great resource, providing access to a wealth of bullet information.

The new Barnes Match Burner bullets are designed for competitive target shooting. The new Match Burners for 2011, listed below, are slated to ship to vendors in March.

New Long-Range X Bullets Based on Tipped Triple-Shock Design
The all-new Long-Range X Bullet® (LRX) line includes four new bullets. Designed after the best-selling Tipped Triple-Shock™ X Bullet® (TTSX), the new LRX bullet design increases B.C. values by increasing ogive and boat tail lengths to improve the bullets’ long-range ballistic performance. LRX bullets are manufactured with the proven 100-percent copper, lead-free bodies. The bullet’s polymer tip initiates expansion, causing the nose cavity to open instantly on contact, doubling the bullet’s original diameter. Barnes claims the LRX bullets allow clean, quick kills even at extreme ranges.

Solid Bullets with Drive Bands
Barnes Banded Solids are made from free-machining brass. A series of bands cut into the bullet’s shank moderate engraving pressure and help reduce barrel wear. Weight-matched with Triple-Shock X Bullets of the same caliber, Banded Solids can be interchanged with expanding TSX bullets without varying point of impact.

Precision machined from the same tough material, Banded Solid Spitzers deliver maximum concentricity, consistent density and match-grade accuracy. According to Barnes, the Banded Solid Spitzers, provide deep penetration without deformation. Barnes says these bullets can “Kill fur-bearing animals cleanly with minimal damage to valuable pelts”.