Useful reloading gear does not have to be costly. Here are ten handy (and very inexpensive) items that belong on your loading bench or in your range kit.

Readers who have just recently discovered the Daily Bulletin may not realize that AccurateShooter.com has hundreds of reference articles in our archives. These authoritative articles are divided into mutiple categories, so you can easily view stories by topic (such as competition, tactical, rimfire, optics, shooting skills etc.). One of the most popular categories is our Technical Articles Collection. On a handy index page (with thumbnails for every story), you’ll find over 120 articles covering technical and gunsmithing topics. These articles can help you with major projects (such as stock painting), and they can also help you build more accurate ammo. Here are five popular selections from our Technical Articles archive.

	Stress-Free Pillar Bedding. Richard Franklin explains how to do a top-quality bedding job, start to finish.
	OnTarget Software Review. Our Editors test free software that measures shot groups with great precision. We explain how to use the program and configure advanced features.
	Savage Action Tuning. Top F-TR shooter Stan Pate explains how to enhance the performance of your Savage rifle by optimizing the torque settings of the action screws.
	Complete Precision Case Prep. Jake Gottfredson covers the complete case prep process, including brass weight sorting, case trimming, primer pocket uniforming, neck-sizing, and, case-neck turning.
	Stock Painting Instructions. Step-by-step guide for stock painting by expert Mike Ricklefs. Mike shows both simple coverage and fancy effects.

German Salazar has written a very thorough guide to measuring nearly all the critical dimensions of cartridge brass. In his Measuring the Case article, on his Rifleman’s Journal website, German reviews the tools and techniques required to measure everything from case overall length to case neck concentricity. Step-by-step, German shows how to measure: Case Length, Case Body length (below neck), Neck Diameter, Headspace, Base Diameter, Neck Thickness, and Case Neck Concentricity.

If you are an “advanced reloader” or want to be, you should read German’s article. Not only does German explain the most common measuring procedures, he highlights some alternative methods you might not have tried yet. The article also links to related discussions of more complex measurement tasts, such as determining case body wall thickness variation.

Even if you’re not a competitive shooter, measuring your brass can provide important safety benefits. As German explains in the conclusion of his article: “There are obviously a lot of measurements that can be taken on the cartridge case and in some cases, more than one way to take them. However, the first two that any new reloader must learn are case length and neck clearance, these two are safety concerns and if overlooked can results in serious damage to the rifle and injury to you.”

• Shell-Holder — If you don’t have calipers, you can use a shell-holder to check for excessive case expansion from hot loads. If a fired case doesn’t slip into the shell-holder easily, your load is definitely TOO HOT.

• Extra Earplugs — Always use ear protection when shooting. We bring a 35mm film canister with extra sets of foam earplugs.

• Hex Wrench or Screwdriver for action screws — Action screws can work loose with time. Always bring the appropriate hex wrench or screwdriver whenever you go to the range.

• Small Wrench for Scope Rings — Check the tension of your scope base and ring fasteners before you go. Bring along a small Torx wrench for the ring screws (or other tool that fits your fasteners).

• Normal and Under-sized Jags — It is often wise to use one-caliber undersize jags when applying solvent with cotton patches. You should have a couple sizes in your range kit.

• Extra Batteries — Bring extra batteries for all your electronic gear — which can include chronograph, windmeter, digital camera, GPS etc.

• Small Notebook and Pen or Pencil — Use the notebook to record chron data, log group sizes, and make notes about wind and weather conditions.

• Adhesive dots — Bring a few sheets of adhesive dots (sold at office supply stores). Use small white or black dots as target pasters. Use larger red or orange dots as aiming points (target centers).

• Folding Chair or Camp Stool — This comes in handy if you’re spotting for another shooter, or if you reload away from the firing line.

• Water Bottle — You can’t shoot well if you’re dehydrated. Bring at least two quarts of water with you and keep a bottle at the bench.

• Surveyors’ Tape and Wood Stakes — You can make inexpensive wind indicators using surveyors’ tape attached to the top of wood stakes.

• Small Plastic Ruler — Use this to measure your group sizes. A transparent (see-through) ruler works best. Rulers are also useful for drawing lines on targets.

This list is not intended to be exclusive. There are many other items you may wish to include. Obviously bring safety glasses, and Sharpie-type pens are always handy to mark targets. We invite our readers to add other “essentials” to the list. The important thing is to plan ahead, packing your key items before you drive to the range.

In addition to the quality calipers you keep at home, every shooter have a “range kit” caliper set. This can be used to quickly measure Cartridge OAL, check base-to-ogive lengths of loaded ammo (with a comparator placed on the jaws), measure group size, and perform a myriad of other tasks at the range. You don’t want to spend a fortune on your range calipers — in the event that they are inadvertently left behind (or loaned to a fellow shooter and never returned).

Right now, Midsouth Shooters Supply is selling Electronic Digital Calipers for under $10.00 that fill the “range kit” role very nicely. Constructed with carbon fiber components, these Altraco calipers are light-weight and rust-resistant. Measurements are displayed in large, easy-to-read, high contrast numbers. And with the flick of a button you can switch between English (inch) and Metric (mm) read-outs. For $9.66 these are a bargain “back-up” set of calipers to be kept in a glove compartment or range kit. No they will not replace your Mitutoyo calipers, but you won’t cry if they get lost!

Danny observed: “I consider this still the best book out there on the subject. I’ve bought a lot of other books only to be sorely disappointed after spending $30-$40 of my hard-earned cash. This book is not one of those! I’ve read and re-read Zediker’s treatise at least four times and refer to it often for advice while reloading. My number one suggestion for those who buy the book is to sit down with a highlighter and read it cover to cover. It’s well-written with a bit of humor and it is not boring.”

Extremely comprehensive, Zediker’s book covers nearly all of the key factors involved in accurate reloading: case sorting, brass prep, load development, neck-sizing, full-length sizing, bushing selection/use, tool selection, priming, powder measurement, and bullet seating. The book also explains how to test and evaluate your ammo, and how to monitor and interpret pressure signs.

There are many “must-read” sections in Zediker’s book, according to Danny: “The section beginning on page 161 dealing with concentricity (and how to achieve it) is excellent. Likewise the Load Limits section discussing pressures offers very valuable advice and info. You should also read Zediker’s commentaries about load testing, powders (burn characterics etc.), and the effects of temperature.”

CLICK HERE to view book contents and sample pages. Zediker has conveniently provided a detailed summary of his book on the web, complete with table of contents, sample pages (PDF format), and dozens of illustrations. Shown above is just one small section that covers ejectors. Overall, we recommend Glen Zediker’s Handloading for Competition, though the book definitely could use some updating. Danny says: “Plunk down the $34.95 and buy this book, you won’t be sorry.” Zediker’s book is available from Amazon.com, Sinclair Int’l, and Zediker Publishing.

One cool feature of these 6″ SE calipers is that you can instantly switch between Metric and SAE (English) display. These asian-made calipers are hardly Mitutoyo quality, but we’ve used them and they work fine for most tasks: measuring neck diameters, Cartridge OAL, bullet diameters, and even the group sizes on your targets. Click the link below to get the $10.50 price:

BUY IT HERE: SE Caliper, Electronic Stainless Steel Body

Note: The vast majority of customers who have purchased these calipers have rated them highly for the price. However a few buyers complained that the display was faulty. The unit we used worked fine and measurements were consistent with a $25.00 Lyman dial caliper. But if you want a serious “last a lifetime” set of calipers, you’ll want to spend more than $10.50 obviously. We see these as an inexpensive alternative for a “back-up” set to be kept in a vehicle or tool kit.

Handgun mats are offered for 8 handguns, including 1911, Browning High Power, Colt Python, Sig 220, Sig P225, Glock, HK USP, and Springfield XDM. Long gun mats include: AK47, AR15, Ruger 10/22, Rem 700, SKS, Winchester ’94, plus Mossberg and Rem 870 scatterguns.

Inexpensive Work Mat from Brownells.com
If you just need a durable work-mat and don’t care about the printed diagrams, Brownells.com offers an 8.75″ x 16.5″ plain black neoprene work mat for just $7.99. The Brownell’s mat is item 084-000-228, found on page 292 of Brownell’s catalog.

	Black & Decker WM425 Workmate 425-550 Pound Capacity Portable Work Bench On Sale $119.99, marked down from $163.92. FREE Shipping.
	Dremel 300-1/24 300 Series Variable-Speed Rotary Tool Kit On Sale $64.37, marked down from $110.36. FREE Shipping.
	Makita BDF452HW 18-Volt Compact Lithium-Ion Cordless 1/2-Inch Driver-Drill Kit On Sale $178.20, marked down from $378.00. FREE Shipping.

There are many, many other Fathers’ Day Bargains, including deep discounts on Multi-Tools, Tool Cabinets, Flashlights, and Wood-working tools.