Can you hit an egg at 600+ yards? We mean hit it reliably — not just by luck. To do that you’ll need good shooting skills and a very accurate rifle. How accurate? Well, a chicken egg is, on average, 2 1/4 inches (57 mm) long and 1 3/4 inches (44.5 mm) in diameter. That means to hit an egg (on demand) at 600 yards, you’ll need a rifle capable of 1/3-MOA accuracy (or better). Forum member DukeDuke has such a gun, and he demonstrated its egg-busting prowess in this short video. DukeDuke’s rifle is chambered in 6BRX (a 30° 6BR Improved) and it’s loaded with DTAC 115gr bullets pushed by Alliant Reloder 17. In the video, the eggs are placed on top of poles set 616 yards from the firing line.

See Egg Hit at 38 second mark…

As you can see in the video, that’s a heck of a nice shooting range where DukeDuke scrambled those eggs at 616 yards. The range is situated just outside of Lake Jackson, Texas. As for the gun… the action is a Rem 700 SA BDL, blueprinted and bedded in a Rem/HS Precision PSS stock. The 31″ barrel is 1:8″-twist Broughton. The “P3″ on the barrel stands for Porter’s Precision Products, Lake Jackson, TX. The rifle was built by Kenneth Porter. The load was 33.5 grains of RL-17 at 2950 fps, with 115gr DTAC bullets touching the lands. Cartridge OAL is 2.400″.

The 6mm BRX was developed by Bob Crone. Retaining the 30° shoulder of the parent 6mmBR case, the BRX has a little less capacity than a 6mm Dasher. Bob told us that his original design for the 6mm BRX always had a .100″ longer head space than a 6mmBR Norma and that he never deviated from that. But after Bob developed the first 6mm BRX, Bill Shehane made a 6mm BRX version that had a .120″ longer head space, and thus some confusion started. In truth, the original 6mm BRX always was (and still is) a chambering with a head space .100″ longer than a 6mm BR Norma.

Reamer Print provided by AR-X Enterprises LLC, www.6mmAR.com.

Can you hit an egg at 600+ yards? We mean hit it reliably — not just by luck. To do that you’ll need good shooting skills and a very accurate rifle. How accurate? Well, a chicken egg is, on average, 2 1/4 inches (57 mm) long and 1 3/4 inches (44.5 mm) in diameter. That means to hit an egg (on demand) at 600 yards, you’ll need a rifle capable of 1/3-MOA accuracy (or better). Forum member DukeDuke has such a gun, and he demonstrated its egg-busting prowess in this short video. DukeDuke’s rifle is chambered in 6BRX (a 30° 6BR Improved) and it’s loaded with DTAC 115gr bullets pushed by Alliant Reloder 17. In the video, the eggs are placed on top of poles set 616 yards from the firing line.

See Egg Hit at 38 second mark…

As you can see in the video, that’s a heck of a nice shooting range where DukeDuke scrambled those eggs at 616 yards. The range is situated just outside of Lake Jackson, Texas. As for the gun… the action is a Rem 700 SA BDL, blueprinted and bedded in a Rem/HS Precision PSS stock. The 31″ barrel is 1:8″-twist Broughton. The “P3″ on the barrel stands for Porter’s Precision Products, Lake Jackson, TX. The rifle was built by Kenneth Porter. The load was 33.5 grains of RL-17 at 2950 fps, with 115gr DTAC bullets touching the lands. Cartridge OAL is 2.400″.

The 6mm BRX was developed by Bob Crone. Retaining the 30° shoulder of the parent 6mmBR case, the BRX has a little less capacity than a 6mm Dasher. Bob told us that his original design for the 6mm BRX always had a .100″ longer head space than a 6mmBR Norma and that he never deviated from that. But after Bob developed the first 6mm BRX, Bill Shehane made a 6mm BRX version that had a .120″ longer head space, and thus some confusion started. In truth, the original 6mm BRX always was (and still is) a chambering with a head space .100″ longer than a 6mm BR Norma.

Reamer Print provided by AR-X Enterprises LLC, www.6mmAR.com.

Specialty Pistols — Report from Ernie Bishop in Wyoming

For those who know of me in the shooting world, you would probably know me in one of two ways: Dealer for SEB Rests or someone who does most of his competing, varminting, and or hunting with specialty pistols. These are typically bolt-action, single-shot rigs that can be used with a bipod. They can seem very similar to a pistol-grip rifle, but without a conventional buttstock.

My interest in all things specialty pistols (Remington XP-100, TC Contender, MOA Maximum, Pachmayr Dominator, H-S Precision HSP, etc.) goes back to the early 1980s. Most of the specialty pistols listed are no longer made, so when I discovered that Kauger Arms was making two, I was excited. I have not had much time to shoot my new Kauger “Black Widow” chambered in 6.5×47 Lapua. But so far, the experience has been fun, even though I have not taken it prairie dog shooting yet or hunted big game with it. For this report, I went to my friend Dan’s place as one can load in the house, and simply shoot off his back porch.

When thinking of a precision shooting platform, most of you would not consider a wood back porch as ideal. But we managed a 0.179″ 3-shot group at 100 yards using a Harris bipod and a small leather bag. Yes the Black Widow can shoot! My load was Lapua brass, Federal 205M primers, Varget powder, and the Hornady 123gr A-Max, with a MV of 2514 fps. I selected the Hornady 123s with prairie dogs in mind. As shown in the top photo, the scope on the Black Widow is a Sightron S-III 6-24 with a Holland’s scope level. The Black Widow also sports a Holland’s Radial Baffle brake.

Here is the Black Widow with a different scope base and scope, ready to go on Dan’s porch.

The day we planned to shoot prairie dogs was windy, so we headed to public land nearby and set up steel to get ballistics drop info and simply to play at distance. We had 5″ steel at 220 yards, 10″ steel (diamond) at 510 yards, and 10″ steel (square) at 650 yards. Wind was from 8 mph to just over 20 mph, so the little 123 grainer was getting tossed about, while keeping us humble all at the same time. Regardless of the gusty winds, I considered the session a success!

Kauger Arms has been making parts for a number of companies in the firearm industry for over 20 years. In 2014 when things slowed down for them, they decided to start building rifles and decided to make their own actions. Good decision — these actions, which are machined in a single process to keep everything true to the bore, are great. Bolt manipulation with Kauger’s action is the smoothest I have ever experienced.

Tim Kauger explained features of his actions to me. The Kauger cock-on-opening action has a Rem 700 footprint for action holes and trigger shoe. The semi-coned bolt features a floating bolt head which is slightly smaller than the bolt body. The firing pin assembly is 1/4-turn removable. There are user-changeable bolt body and knob options. There is a side bolt release above the stock line. All moving surfaces are nitrided. This can be ordered single shot, feed rails or DBM cut. Also the long action will accept up to a .338 Lapua/.300 Norma Mag if ordered that way (with 1.25″ barrel cylinder).

Kauger Arms offers a right-hand or left-hand grip, which is very comfortable. I shot the Black Widow both right-handed and left-handed with no problems whatsoever. Kauger Arms can build the Black Widow in many more chamberings than the two that are listed on the KaugerArms.com website.

New left-bolt/left port action from Kauger Arms — To the specialty pistol shooters reading and to those considering entering the SP world, Kauger Arms has listened to your requests and is working on a left bolt/left port short action that will be offered either as a single-shot action or with bottom metal. You grip the pistol with your right hand, then run the bolt with your left-hand.

Specialty Pistol 2 — The Camo .223 Remington HSP

Here is another one of Ernie Bishop’s specialty pistols. This eye-catching camo-stocked rig was crafted by H-S Precision. Sadly, H-S Precision is not making these HSP pistols anymore. This .223 Remington features a 1:7″-twist, 15-inch-long H-S barrel fitted with the “H” Brake. On top is a Burris XTR-III 5.5-30x56mm scope with SCR 2 MIL reticle and Burris rings.

Great Results with Varget + 77gr Sierra TMKs
Ernie tells us: “For a load, I have been running Lapua brass, Rem 7.5 primers, Varget, and the 77 grain Sierra TMK. Muzzle Velocity is 2675 FPS. As you can see, it shoots pretty well. Shown at right is a measured 0.265″ 3-shot group at 100 yards, shot from Harris bipod and small field bag.

Previous to this, I was shooting Federal Match ammo with the 77 grain SMK (MV was 2500 fps), with prairie dog kills past 600 yards, and have played on steel out to 1000 yards. This H-S specialty pistol is great for young or old alike, for novice shooters or experienced shooters. Everyone needs a fast twist .223 Remington!”

Here is my friend Dan shooting the .223 Rem HSP with factory ammo during a prairie dog trip.

Precision rifle shooters don’t have to hit a big-league fastball, or launch a top-fuel dragster in the blink of an eye. Nonetheless, reaction times are important in our sport — both for competitive shooters and hunters. Want to catch that prairie dog before he slips down his hole? You’ll need to be quick. Want to win at short-range benchrest? Then you’ll need to watch your windflags and respond quickly to a change. Miss a major wind-shift and you could ruin your whole weekend.

Here’s a fun test of reaction times from HumanBenchmark.com. The way it works is that, after clicking “Start”, you wait until the background color changes from red to green. The instant you see green, immediately click your mouse. The average (median) reaction time is 215 milliseconds.

Tips for Faster Times
Here are three tips to speed up your reaction times:

1) Respond to the color change, rather than wait to read “CLICK!”.
2) Try focusing at the corner of the colored box, rather than the center.
3) Have your index finger “poised and ready” over the left button–you can shave milliseconds by very slightly depressing the button before you actually click.