This week’s featured firearm belongs to John “SnakeEye” Seibel, founder of the VarmintsForFun website. In recent years, John has become a “true believer” in the little 20-Caliber cartridges. He says this light-recoiling 20 PPC, Rampro-actioned pistol is perfect for a quick shot on a critter, taken from the front seat of his truck. John tells us: “A long-range pistol is an ideal truck gun in my opinion. It stows in a small area and doesn’t take up the room a rifle does. Just keep ear protection near by at all times! I’ve taken varmints as far as 400+ yards with this 20 PPC pistol, so why would you need a rifle?”

Perspectives on Pistols for the Varmint Hunter

by John Seibel
I decided to try my hand at shooting varmints with a pistol one day when I grew tired of wrestling a rifle around in the truck for a quick shot. Many times when traveling around on the farm you’ll spy a groundhog or fox that usually isn’t more than 200 yards away. A single-shot pistol like the Thompson Contender could fit the bill. With its compact length, around 20 inches, a long-barrel pistol can lay on the truck’s passenger seat for easy access. I usually keep my two leather brick-style sandbags laying beside the console and seat. I have a box made from hard rubber that I lay across the top of the door. I then lay the two bags on top. This makes a nice platform to rest the pistol’s forearm. I like to use a forearm that is at least two inches wide. That lets the gun lay steady—almost like you are shooting from a bench rest. For the shooting hand, I prefer a pistol grip with finger grooves and a slight overhang or flare for the web of your hand.

As for optics, I tried long-eye-relief pistol scopes but they lacked the magnification you need for long-range target shooting or varminting. Those pistol scopes have really long eye-relief because they are designed to work with the pistol held at arm’s length. When shooting at the bench or from a truck that’s not what you want. By the time you find the target and get your eye in the exact location, the varmint has moved on or died of old age! After much fiddling around with pistol-type scopes, I finally decided to use rifle scopes on my long-range pistols. The minimum I use is a 4.5-14×40. Eye relief on a Leupold 4.5-14x40mm is about 3.5 inches at 4.5 power. Field of view is better with rifle scopes too and it’s easier to acquire your target. For this type of shooting a light-recoiling caliber is essential or you will have scope-eye bad! I currently have three long-range pistols and use them to shoot 17M4, 20 PPC, 22 BR, and .223 Rem. The featured gun may be the most accurate of my pistols, and your editor thinks it’s the most handsome of the three.

The Rampro Pistol Project — Working with John Illum
A couple of years ago I called John Illum of Rampro about building the ultimate long-range pistol. It just so happens that John was a big time long-range pistol shooter. I told him that I wanted a gun that didn’t recoil badly and wouldn’t torque when fired. As I am a quadriplegic, with no grip in my hands, the gun had to handle well under recoil so I didn’t drop it. Recoil had to be straight back–no twisting.

Well Illum listened to me and came up with a gun that performs just the way I wanted. Illum suggested a rear grip stock of his own design. It has a 2.25″ wide forearm and a rear grip with a slight palm swell that fits your hand perfectly. Another nice feature is the finger grips. It has an extended overhang or “beavertail” that fits comfortably in the web of your hand. Of course it had to be walnut! I chose Rampro’s STP small action with a PPC bolt. His bolt uses a Sako-type extractor. The action is a single-shot. Being right-handed, I chose a right bolt, left port configuration. This works really well in a pistol. You can load with your left hand and see the round laying in the action–that’s what you want in a pistol without a safety.

Gun Specifications
John Illum’s Rampro actions are chrome-moly steel. Commonly you’d see them blued, but I had him put a brushed nickel finish on the action and rings. From a few feet away it looks like stainless. The trigger is Illum’s own design set at 8 ounces, and there’s no creep that I can detect. The action has Remington barrel threads and will accept Remington type triggers. One neat thing is that the action was milled with an integral recoil lug (much like the current Surgeon Action). And the bolt is milled all in one piece–no soldered-on handles. My only gripe with this bolt handle is that it could be a tad longer, but it still is manageable for a single-shot. You’ll also note how slick and streamlined the scope rings are. Illum made those as well. His rings mount to the action via two screws from the inside of the ring, a very elegant set-up for sure. (I currently have a 6.5-20x40mm Nikon scope on this gun. If I had to do this project over again the only thing I would change would be installing a 30mm scope because I like ‘em!).

The barrel is a PacNor Super-Match heavy taper with flutes milled by John Illum, who did all the gunsmithing on this pistol. Twist rate is 1 in 12 inches, with an 11° crown, polished to a mirror finish. The barrel was bead-blasted on the exterior to cut glare. I had Illum cut a 20 PPC minimum-spec chamber, with a .237″ neck. That way I don’t have to turn necks on the Lapua Brass (220 Russian necked down to .204). This is a varmint gun–there’s no need for turned necks. [Editor’s Note: Rampro is no longer in business. However, John tells us “I haven’t had any problems with the action so far. If I did, most competent gunsmiths could fix them easily.”]

Handgun Handling Tips
If you want to shoot a long-range pistol but have never have shot this kind of gun before, try to find a mentor — someone with a gun like this who can school you a bit in the correct technique. The first thing you notice is that you have no comb or cheek piece to help align your head and neck. And getting used to the optics takes some practice. Most people fit a pistol-type (long eye-relief) scope, but these can be awkward to use, and somewhat frustrating at first — the field of view is very restricted. Move your head very slightly and you can lose the sight picture completely. You can solve that problem by using a standard rifle scope, but that will put your head very close to the eye-piece — just three to four inches. With that arrangement, if you don’t hold the gun correctly … POW instant scope-eye!

Now once you get the hang of shooting a long-range pistol you will find it can be just as accurate as a rifle. But there is a trick to shooting them. Shooting a long-range pistol is a whole new world — you need to hold it just right. If you don’t let the gun roll back a little (i.e. if you grip too hard) you will get vertical stringing. I hold my hand against the back of the grip to guide the gun but let it almost free recoil. Looking at how compact the pistol is, you might think “Hey, this would make an ideal ‘walking-around’ varminter.” Well, that’s not really the case. For real precision shooting a solid benchrest type set-up is a must. You can attach a bipod to a long-range pistol, but you would need a flat surface. A fence-post top would work pretty well without a bipod if you carry a small light bag. Overall though, this type of pistol works best as a sandbag gun. For a walking-around gun, you’d be happier with a rifle I think.

Load Development and Accuracy
When I built this gun, Hornady had just released the 32gr V-Max (see footnote), a good match for my barrel’s 1:12″ twist. I choose the 20 PPC because of the very good Lapua brass (220 Russian parent case). I figured teaming Lapua brass with the little .204 bullet would offer excellent accuracy combined with very low recoil. My expectations were fulfilled. The brass proved to be excellent and the PacNor loved the little V-Max pills.

I tried quite a few different loads and most powders that I tried worked very well. These included: H322, Benchmark, AA 2460, and Reloader 7. Amazingly, with just 14″ of barrel, all of these powders delivered impressive velocities–ranging from 3914 to 4074 fps. I settled on 48 Harrell’s clicks of Accurate Arms (AA) 2460, which drives the 32gr V-Maxs to 3995 fps.

With AA 2460 the gun will shoot in the low 3s at 100 yards consistently — as long as I steer the gun right, which takes some practice. I think groups in the low 0.3″ range is excellent for a non-benchrest factory bullet. Despite having no buttstock to grab, recoil on my 20 PPC pistol is very minimal — it just rocks back into your hand. The main problem is to keep the scope from smacking you, since I used a rifle scope with short eye-relief. Muzzle flash and noise are tolerable but DO NOT shoot one of these without good ear protection. Your ears are very close to the muzzle.

I also have a 20 PPC rifle built on a BAT action with a Richard’s #008 laminated stock cut down in size. That gun’s 1:9″-twist Lilja barrel lets me shoot the Berger 50gr LTB bullets. In the wind, these perform quite a bit better than the 32s. My two favorite loads for the 50 grainers are: a) 26.0gr VV N135, CCI 450 primers, 3615 fps; and b) 27.3gr Hodgdon Varget, CCI 450s, 3595 fps. The BAT 20 PPC also shoots really well with the 40gr V-Max, pushed by N135 and Fed 205M primers.

Pistol Action Legal Issues
One important thing to remember if you build a pistol is to make sure the receiver came from the factory as a pistol and was titled as a pistol. Rifle actions are illegal to use as a pistol. Yes, that’s a nonsensical law, but it’s still on the books. You can use factory pistol actions such as the XP 100.

If you want a new custom action such as a BAT (my favorite), you can order it as a pistol action and when you get it, register it as a pistol. Note, in some states there may be additional fees, waiting periods, or restrictions for pistol actions (as opposed to rifle actions). Check your local laws before ordering the action.

WARNING: For your own safety, ALWAYS reduce all starting charges by 10% and work up carefully! Ambient temperature changes, powder lot variations, and differences in barrel friction can result in significantly increased pressures.

Footnote: When first manufactured, the small Hornady 20-Caliber V-Max bullet was actually 33 grains, not 32 grains as sold currently. I still have some of the 33-grainers. I’ve observed no functional difference between the 33s and the current 32-grainers.

Never had a chance to hunt prairie dogs in the American west? Then check out this video. Dan Eigen, host of the We Love It Outdoors Television series, ventured to South Dakota for some varmint hunting. Dan teamed up with Varmint Hunter Association President Jeff Rheborg to patrol some South Dakota Dogtowns where things get serious. In the video, you’ll see p-dog hits at distances from 70 yards to roughly 450 yards. The hunters were shooting from portable, wood-topped swivel rests, using AR-platform rifles on X-type sandbag rest. (Rifle zeroing session is shown at the 5:30+ mark.)

Multiple cameras were employed so you can see both the shooter’s POV and close-ups of the prairie dogs downrange. Watch the shooters having fun with a prairie dog cut-out and some Tannerite at the 9:00-minute mark. This guys are having a grand old time sending critters to Prairie Dog Heaven — we think you’ll enjoy the video.

Prairie Dog Hunting Starts at 2:20 Time-Mark in Video:

NOTE: This video actually covers three sequences: 1) Three-gun training; 2) Prairie Dog Hunting; and 3) Coyote Hunting. The Prairie Dog segment runs from 2:20 to 15:15. If you wish, you can slide the controls forward or back to watch the other segments.

A varmint shooter’s target is not conveniently placed at a fixed, known distance as it is for a benchrester. The varminter must repeatedly make corrections for bullet drop as he moves from closer targets to more distant targets and back again. Click HERE to read an interesting AccurateShooter Varrmint Forum discussion regarding the best method to adjust for elevation. Some shooters advocate using the scope’s elevation adjustments. Other varminters prefer to hold-over, perhaps with the assistance of vertical markers on their reticles. Still others combine both methods–holding off to a given yardage, then cranking elevation after that.

Majority View — Click Your Elevation Knob
“I zero at 100 yards — I mean really zero as in check the ballistics at 200 and 300 and adjust zero accordingly — and then set the scope zero. For each of my groundhog guns I have a click chart taped into the inside of the lid of the ammo box. Then use the knobs. That’s why they’re there. With a good scope they’re a whole lot more accurate than hold-over, with or without hash marks. This all assumes you have a good range finder and use it properly. If not, and you’re holding over you’re really just spraying and praying. Try twisting them knobs and you’ll most likely find that a 500- or 600- or 700-yard groundhog is a whole lot easier than some people think.”
– Gunamonth

“I have my elevation knob calibrated in 100-yard increments out to 550. Range-find the critter, move elevation knob up…dead critter. The problem with hold-over is that it is so imprecise. It’s not repeatable because you are holding over for elevation and for wind also. Every time you change targets 50 yards, it seems as if you are starting over. As soon as I got completely away from the hold over method (I used to zero for 200), my hit ratios went way up.” — K. Candler

“When I first started p-dog shooting, I attempted to use the hold-over method with a 200-yard zero with my 6mm Rem. Any dog much past 325-350 yards was fairly safe. I started using a comeups table for all three of my p-dog rifles (.223 Rems and 6mm Rem). 450-yard hits with the .223s are fairly routine and a 650-yard dog better beware of the 6mm nowadays. An added benefit (one I didn’t think of beforehand) with the comeups table (elevation only), is that when the wind is blowing, it takes half of the variables out of the equation. I can concentrate on wind, and not have to worry about elevation. It makes things much more simple.” — Mike (Linefinder).

“I dial for elevation and hold for wind. Also use a mil-dot reticle to make the windage holds easier. For windage corrections, I watch for the bullet strike measure the distance it was “off” with the mil-dot reticle, then hold that much more the other way. Very fast once you get used to it.” — PepeLP

Minority View–Hold-Over is Better
“I try to not touch my knobs once I’m zeroed at 200 meters. Most of my varmint scopes have duplex reticles and I use the bottom post to put me on at 300 meters versus turning knobs. The reason I try to leave my knobs alone is that I have gone one complete revolution up or down [too far] many times and have missed the varmint. This has happened more than once and that is why I try not to change my knobs if at all possible.” — Chino69

“I have been using the hold over method and it works for me most of the time but the 450 yards and over shots get kinda hard. I moved to a 300 yard zero this year and it’s working well. I do want to get into the click-up method though; it seems to be more fool-proof.” — 500YardHog

Compromise View–Use Both Methods
“I use both [methods] as well — hold over out to 250, and click up past that.” — Jack (Wolf)

“I use the target knobs and crank-in elevation. I also use a rangefinder and know how far away they are before I crank in the clicks. I have a scope with drop dots from Premier Recticle and like it. No cranking [knobs] out to 600.” –Vmthtr

At SHOT Show 2017, Nosler showcased a new .22-caliber cartridge designed for AR-platform rifles. Called the 22 Nosler, the new cartridge resembles a 6.8 SPC necked down to .22 caliber. Comparing Nosler’s ammo specs with Hodgdon load data, it looks like the 22 Nosler can deliver about 250-300 fps more velocity than the standard .223 Rem cartridge. That’s significant for varminters looking for higher performance from an AR15-type rifle. With a 55-grain bullet, highest possible velocity is 3500+ fps with a max load of Hodgdon CFE 223 powder, based on this Nosler Load Chart:

MORE LOAD DATA for 22 Nosler (Click tabs after jump)

22 Nosler LOAD PDFs:
https://load-data.nosler.com/nosler-load-data/pdf/22-nosler/22-nosler-55gr.pdf
https://load-data.nosler.com/nosler-load-data/pdf/22-nosler/22-nosler-64gr.pdf
https://load-data.nosler.com/nosler-load-data/pdf/22-nosler/22-nosler-69gr-70gr.pdf
https://load-data.nosler.com/nosler-load-data/pdf/22-nosler/22-nosler-77gr.pdf

Nosler will produce 22 Nosler ammunition in various bullet weights, starting with 55 grain and 77 grain. To run the 22 Nosler, an AR owner will need a new upper and 6.8 SPC type magazines. This video explains how to convert your AR-platform rifle to run the 22 Nosler.

“Everything Old Is New Again…”

Examining the 22 Nosler cartridge, our friend Grant Ubl had a case of “deja vu”. He thinks the new 22 Nosler bears a striking resemblance to a wildcat from the 1960s: “The .22 Nosler looks like a throwback to the 1963-vintage .224 Winchester E5 experimental cartridge, right down to the rebated rim.” Here is an old Winchester print:

Another poster said this cartridge resembles the “.220 Thunderbolt” a wildcat devised by John Scandale in 2004. Posting on Facebook, Mr. Scandale said the designs were very similar. According to Keystone Accuracy, the .220 Thunderbolt’s “design origin came from the now largely popular 6mm Hagar in its infancy stage back in 2003.” While it looks very similar to a 6.8 SPC necked to .224, the .220 Thunderbolt is different because the 6mm Hagar brass is 0.100″ longer than 6.8 SPC. Read History of .220 Thunderbolt.

Neck-up the 22 Nosler to .25 Caliber?

Dan Z. has inspected in the 22 Nosler ammunition and he’d like to see a .25 Caliber version. On Facebook, Dan posted: “I got my hands on some of the ammo a couple weeks ago. It does look like a .223 that has its body diameter expanded to that of a 6.8. Consequently, it is longer than the 6.8 overall and in the body. I necked a piece of fired brass to 6.8 and it looked like it would provide some improvement in velocity. A more interesting idea might be to neck it to .25 as a .250 Savage performance clone in an AR-15 platform.”

Varminter.com recently released a First Hunt Report on the new Savage A17 rifle. Savage’s new semi-auto .17 HMR has caused quite a stir. Accurate and affordable, the Savage A17 is also the first .17 HMR to feature a delayed blow-back action. We think the A17 may be the most important new rimfire rifle of 2015, so we were pleased to see that Eric Mayer, Editor of Varminter.com, put the new semi-auto Savage through its paces.

CLICK HERE for Savage A17 First Hunt Report on Varminter.com

Mayer wanted to see how the new Savage would perform, accuracy-wise, and he also wanted to see how the A17 fared in the field. Mayer achieved one-MOA accuracy with the Savage A17 using the latest CCI-brand ammo, and he demonstrated the A17 is wickedly effective on ground squirrels. Below we’ve provided highlights from Varminter.com’s Savage A17 First Hunt Report.

“I [collected] as many versions of the currently available .17 HMR ammunition as I could get my hands on. I had already picked-up and tested the new CCI A17 ammunition, so I filled up my ammo safe with other CCI ammunition, as well as Hornady and Winchester, including the lead free 15.5 grain NTX versions, also from Hornady and Winchester. After spending some time at the bench, I saw that this rifle shot the CCI A17 ammunition best, with most groups hovering right around 1″ to 1.20″ at one hundred yards, and some of the other ammo choices in the 1.25″ to 1.50″ range. This was with a warm barrel and in-between cleanings during the break-in process.”

Mayer found the A17 was easy to maintain: “I was very impressed by the ease of pulling the rifle apart for cleaning out in the field. Even with the scope mounted, I was able to quickly and easily remove the parts needed to give me complete access to the barrel through the breach, so cleaning was a breeze.”

A17 Reliability Lessons — Seat Those Rotary Magazines Correctly Folks
Some early A17 purchasers have noted occasional failures to feed. We believe this is because the magazine was not fully seated (and locked in place) in the firearm. The experience of Varminter.com’s Editor seems to confirm this. Mayer reports “As I began to shoot the rifle, I experienced what a few others have reported, with the magazine falling out while shooting. I quickly realized that I was not snapping the magazine into place every time. I found that popping in the magazine while the bolt was pulled, or locked back, resolved the issue. I did have a few failures to feed, but only on some of the older ammunition I was shooting, namely the first year Hornady ammo and the lead free ammo (which is about 3-4 years old). The newer ammo did not have any issues and functioned well, even while shooting some 10-round ‘mag-dumps’. The trigger is on the heavy side.”

A17 Reliability Shown in Video
The Savage A17 went through a very thorough manufacturer’s testing process before it was released to the market. In fact Savage put over 500,000 test rounds through A17 prototypes. When AccurateShooter.com tested the A17 at Media Day — it worked flawlessly, so long as you make sure the magazine is fully seated. We had zero issues, making us think that reported issues may be related to “driver error”; specifically not seating the magazine properly. Watch AccurateShooter.com video with rapid fire sequence.

Varminter.com recently released a First Hunt Report on the new Savage A17 rifle. Savage’s new semi-auto .17 HMR has caused quite a stir. Accurate and affordable, the Savage A17 is also the first .17 HMR to feature a delayed blow-back action. We think the A17 may be the most important new rimfire rifle of 2015, so we were pleased to see that Eric Mayer, Editor of Varminter.com, put the new semi-auto Savage through its paces.

CLICK HERE for Savage A17 First Hunt Report on Varminter.com

Mayer wanted to see how the new Savage would perform, accuracy-wise, and he also wanted to see how the A17 fared in the field. Mayer achieved one-MOA accuracy with the Savage A17 using the latest CCI-brand ammo, and he demonstrated the A17 is wickedly effective on ground squirrels. Here are some highlights from Varminter.com’s Savage A17 First Hunt Report:

“I [collected] as many versions of the currently available .17 HMR ammunition as I could get my hands on. I had already picked-up and tested the new CCI A17 ammunition, so I filled up my ammo safe with other CCI ammunition, as well as Hornady and Winchester, including the lead free 15.5 grain NTX versions, also from Hornady and Winchester. After spending some time at the bench, I saw that this rifle shot the CCI A17 ammunition best, with most groups hovering right around 1″ to 1.20″ at one hundred yards, and some of the other ammo choices in the 1.25″ to 1.50″ range. This was with a warm barrel and in-between cleanings during the break-in process.”

Mayer found the A17 was easy to maintain: “I was very impressed by the ease of pulling the rifle apart for cleaning out in the field. Even with the scope mounted, I was able to quickly and easily remove the parts needed to give me complete access to the barrel through the breach, so cleaning was a breeze.”

A17 Reliability Lessons — Seat Those Rotary Magazines Correctly Folks
Some early A17 purchasers have noted occasional failures to feed. We believe this is because the magazine was not fully seated (and locked in place) in the firearm. The experience of Varminter.com’s Editor seems to confirm this. Mayer reports “As I began to shoot the rifle, I experienced what a few others have reported, with the magazine falling out while shooting. I quickly realized that I was not snapping the magazine into place every time. I found that popping in the magazine while the bolt was pulled, or locked back, resolved the issue. I did have a few failures to feed, but only on some of the older ammunition I was shooting, namely the first year Hornady ammo and the lead free ammo (which is about 3-4 years old). The newer ammo did not have any issues and functioned well, even while shooting some 10-round ‘mag-dumps’. The trigger is on the heavy side.”

A17 Reliability Shown in Video
The Savage A17 went through a very thorough manufacturer’s testing process before it was released to the market. In fact Savage put over 500,000 test rounds through A17 prototypes. When AccurateShooter.com tested the A17 at Media Day — it worked flawlessly, so long as you make sure the magazine is fully seated. We had zero issues, making us think that reported issues may be related to “driver error”; specifically not seating the magazine properly. Watch AccurateShooter.com video with rapid fire sequence.

.

The first MVP Series Varminters were recently unveiled at the 2011 NRA Convention in Pittsburgh, PA. Two MVP versions will be offered initially. The first is a standard rifle with 10-round mag and factory-installed, Weaver-style bases. The second is a combo package which includes the rifle, 4-16x50mm scope (mounted), bipod, and 10-round magazine. Both guns have 24″ fluted, medium-contour barrels, with 1:9″ twist rates. MVP rifles will ship from the factory with sling swivel studs and factory-installed Weaver-style scope bases. Without scope, the MVP varminter weighs roughly 7.25 pounds. Mossberg claims its MVP rifles can deliver “MOA accuracy right from the box!”. We’ll see…

MVP Rifles Feature Adjustable Triggers
MVP rifles are fitted with Mossberg’s LBA “Lightning” Adjustable Trigger System, which adjusts from 2 to 7 lbs. pull weight. The LBA trigger, like the Savage Accutrigger, features a central blade that blocks sear movement unless fully depressed.

Nice Laminated Stock with Wide Fore-End
One of the best features of the MVP rifles is the stock, which comes with factory-fitted pillars. Mossberg fitted the MVPs with a nice, laminated stock that should work well either on sandbags or when shot from bipod. To ride the bags better, the fore-end is wider than typical hunting stocks, with a flat bottom. Stippling on the fore-end and pistol grip provide for positive hand placement. We think this stock is a pretty good design for the rifle’s intended uses.

Mossberg MVP Series Varmint Rifle Specifications:

Barry reports: “Here is my 300WSM Varminter built by Richard Franklin of Richards Custom Rifles. This is one awesome piece of work — And YES, it shoots! I expected a lot when I asked Richard to build this gun, and believe me; I got more than I expected. I am not a machinist, nor am I an engineer, but I can tell you for certain that this is the finest quality work you can expect from a gun builder.

As you can imagine, my reason for building this gun was for long range varminting. I had read articles about the flat-shooting 300 WSM Varminter on AccurateShooter.com, and how it could launch a projectile at over 4000 fps with great accuracy. I also read some of the brutal articles on other sites from the nay-sayers. So, I had to have one. Simply put: THE NAY-SAYERS ARE WRONG! You CAN launch a 125gr Ballistic Tip bullet over 4000 fps and terrorize those little fury creatures way far away. I love this thing… I think I’ll ask Richard to build me another!” [Editor’s Note: Anyone wanting Richard Franklin to build a custom rifle had better act quickly. Richard is retiring and he will not work on any orders submitted after January 1, 2011.]

Franklin 300 WSM Vaminter Specifications:

BAT Machine SS Model ‘B’ action, RB/RP, Diamond fluted bolt
BARTLEIN 30″ SS str. 1.25″-diam. barrel (polished) 1:16″ tw, .337 neck
BAT Machine polished aluminum trigger guard
HOLLAND recoil lug
JEWELL BR trigger set at 1.5 oz.
HARRELL’s muzzle brake
UNDERTAKER stock in Quilted Maple, clearcoated
RCR polished SS pillar bedding
LIMBSAVER recoil pad (I hate recoil)
BAT Machine SS 20moa scope base
NIGHTFORCE 30mm scope rings
NIGHTFORCE 8x32x56 NSX with NP-2DD reeticle
NIGHTFORCE angle meter
U.S OPTICS cant indicator

Richard Franklin To Retire — Final Order Deadline Announced
Richard Franklin, builder of the beautiful rifle shown above, has announced his retirement. He will be taking orders for custom rifles through January 1, 2011, but that’s it — he’s giving up the business. Orders received after January 1st will be built by Richard’s protégé Tommy Shurley. Read on…

Leupold’s CDS system is a user-friendly invention that can really simplify shooting at multiple yardages. The big single-digit Arabic numerals on the elevation dial correspond to 100-yard intervals, while the smaller numbers show 50-yard intervals. (Click values are otherwise 1/4-MOA.) No longer do you have to remember specific come-ups for particular distances. For the CDS system to work correctly however, your load’s ballistics must match a set of master loads that Leupold uses to calibrate the dial scales. Hunters using most common cartridges should find a calibrated load that matches their muzzle velocity and bullet BC. CDS turrets are available on these scopes: VX-3 3.5-10x40mm, VX-3 3.5-10x50mm, VX-3 4.5-14x40mm, VX-3L 3.5-10x50mm and VX-3L 4.5-14x50mm.

Free CDS Calibrated Dials with Purchase of VX-3 Scopes
Leupold’s CDS system is explained at www.leupold.com/VX-3CDS. Visitors to the VX-3 CDS webpage will find an educational video and graphics, an overview of how the system works and its advantages, and details on a special offer. With the purchase of any VX-3 CDS riflescope, shooters receive two customized, ballistically-matched adjustment dials ($100 retail value) at no extra cost. This offer ends December 31, 2010. Click the image below to learn more (turn down your speakers before clicking as a loud video will auto-play).

Behind the action there is a comfortable pistol grip carved at a good angle for shooting from the bench. It has a nice palm swell at the bottom but is narrow enough at the top that you can get your thumb around for secure, properly aligned grip. I tried out this stock and it was very comfortable. The slightly raised comb was shaped nicely and the grip really felt good in the hand. The middle section of the stock is completely carved away (presumably to save weight). However on the last 5″ or so, the stock has a conventional section on the bottom. This provides a solid platform to ride the bags.

The new Howa 1500 Thumbhole Varminter will cost between $695 and $830 depending on chambering. It will be offered in both short action and long action versions. Available chamberings are: 204 Ruger, 223 Rem, 22-250, 243 Win, 6.5×55, 25-06, 270 Win, 308 Win, 30-06, 300 Win Mag, 7mm Rem Mag, and 338 Win Mag. For more information, contact Legacy Sports Int’l, USA Distributor for Howa rifles.