In the ELR game, particularly the King of 2 Miles (KO2M), it’s “go big or go home”. The top shooters run large-capacity cartridges that push large-caliber, ultra-high BC bullets at very high velocities. Bullets launched by cartridges such as the .416 Barrett can sustain supersonic velocities at Extreme Long Ranges — and that’s what it takes to win. The .416 Barrett can launch a 550-grain solid bullet at 3000+ FPS.

Photo from ELR Competitor Corbin Shell.

2018 and 2019 Kings of 2 Miles Loaded on RCBS Presses
So how do you load jumbo cartridges such as the .416 Barrett? It takes a big, heavy, super-strong reloading press. We’ve learned that two recent King of 2 Miles champions, Paul Phillips (2019) and Robert Brantley (2018) both loaded their KO2M ammo on RCBS AmmoMaster .50 BMG presses. Phillips loaded .416 Barrett ammo, while Brantley loaded a similar .416 MCS cartridge.

In 2018, Robert Brantley topped the field using his custom .416 MCS cartridge. Then in 2019, Paul Phillips won the K02M competition shooting a .416 Barrett, with Brantley a close second. Both Phillips and Brantley use the RCBS AmmoMaster .50 BMG single stage press kit and RCBS .416 Barrett dies to hand-load for extreme long-range. “My ammo has been much more consistent after switching to the RCBS press and dies,” remarked Phillips, who runs the Global Precision Group. Brantley said he uses RCBS products for most of his reloading needs — from the dies and AmmoMaster, to the ChargeMaster and Brass Boss. His custom .416 MCS loads launch a 550-grain bullet more than 3,100 fps.

Loading with RCBS AmmoMaster .50 BMG Press
This video shows reloading with the RCBS AmmoMaster .50 BMG press. While this video shows .50 BMG cases being loaded, the principles are the same for loading the .416 Barrett cartridge or other big rounds. Big cases need big presses!

Emil Praslick III is widely recognized as one of the greatest wind wizards on the planet — a master at identifying wind value and direction, and predicting wind cycles. As coach of the USAMU and top civilian teams, Emil has helped win many high-level championships. In the three videos we feature today, Emil, who works with Capstone Precision Group (Berger, Lapua, SK, Vihtavuori) and Team Applied Ballistics, explains how to determine wind direction and velocity using a variety of indicators. Praslick, now retired from the U.S. Army, was an 18-time National and 2-time World Champion coach with the USAMU.

Video ONE: Wind Theory Basics — Understanding “Wind Values”

In this video from UltimateReloader.com, Emil explains the basics of modern wind theory. To properly understand the effect of the wind you need to know both the velocity of the wind and its angle. The combination of those variables translates to the wind value. Emil also explains that the wind value may not be constant — it can cycle both in speed and velocity. Emil also explains some of the environmental conditions such as mirage that can reveal wind conditions.

Video TWO: Determining the Direction of the Wind

Key Point in Video — Find the Boil
Emil explains how to determine wind direction using optic. The method is to use spotting scope, riflescope, or binoculars to look for the “Boil” — the condition in mirage when the light waves rising straight up. The wind will generate that straight-up, vertical boil in your optics when it is blowing directly at you, or directly from your rear. To identify this, traverse your scope or optics until you see the boil running straight up. When you see that vertical boil, the direction your optic is pointing is aligned with the wind flow (either blowing towards you or from directly behind you).

Video THREE: The No Wind Zero Setting

In this second video, Emil defines the “No-Wind Zero”, and explains why competitive shooters must understand the no-wind zero and have their sights or optics set for a no-wind zero starting point before heading to a match. In order to hit your target, after determining wind speed and direction, says Emil, “you have to have your scope setting dialed to ‘no wind zero’ first.”

Coach of Champions — Emil Praslick III
SFC Emil Praslick III, (U.S. Army, retired) works with Berger Bullets and Applied Ballistics. Emil served as the Head Coach of the U.S. National Long Range Rifle Team and Head Coach of the USAMU for several years. Teams coached by Emil have won 33 Inter-Service Rifle Championships. On top of that, teams he coached set 18 National records and 2 World Records. Overall, in the role of coach, Praslick can be credited with the most team wins of any coach in U.S. Military history.

Shown above is David Tubb, the legendary 11-time National High Power Champion, posing with a very serious rifle used in the Extreme Long Range (ELR) game. David has jumped into the Extreme Long Range discipline in a very big way, producing a .375-caliber, long-barreled ELR version of his famous Tubb rifle, called the Adaptive Target Rifle (ATR). A version of this rifle, piloted by David’s son-in-law Nate Stallter, set an ELR World Record in January 2018. See video below for a full report.

This video shows Team TUBB setting a new ELR World Record of 2011 Yards using the Tubb Adaptive Target Rifle in .375 CheyTac. Nate Stallter nailed three shots at over one mile — 1768 yards. Then Nate broke his own record, going 3 for 3 at 2011 yards. ELR Central hosted this match, held at the Front Sight gun range, Pahrump, Nevada on January 21, 2018.

David Tubb Shoots ELR Adaptive Target Rifle at KO2M

For the Extreme Long Range (ELR) discipline, David Tubb developed a .375-caliber, long-barreled ELR version of his famous Tubb rifle, called the Adaptive Target Rifle (ATR). A version of this rifle, piloted by David’s son-in-law Nate Stallter, set an ELR World Record in January 2018.

David Tubb Talks about KO2M and Extreme Long Range Shooting

David Tubb’s long-range rifles have performed well in Extreme Long Range shooting. AT the 2019 NRA Extreme Long Range Championship, David Tubb won the Heavy Gun Division. In this video, created during the King of 2 Miles (K02M) competition at the Whittington Center in New Mexico, David talks about the challenges of ELR shooting, and cartridge selection. Big, heavy, large-caliber bullets with ultra-high BCs are favored for the ELR game, but recoil and cost must also be considered.

About the .375 CheyTac Cartridge

Some of the most successful ELR cartridges are based on the CheyTac family, including the .375 CheyTac (9.5×77) and .408 CheyTac (10.36 x 77). This .375 Cheytac cartridge has proven to be tough and accurate. And it is capable of winning — our friend Derek Rodgers won the 2017 King of 2 Miles (K02M) event shooting a .375 CheyTac (9.5×77).

.375 CheyTac — K02M-Winning, World-Beating Cartridge

Derek Rodgers was the 2017 King of 2 Miles. Derek is also the first-ever human to ever hit the maximum distance target target at 3368 yards (1.91 miles). His cartridge choice? The .375 CheyTac. Derek ran Cutting Edge Bullets in Peterson brass with Hodgdon H50BMG powder.

Q: Why did you choose the .375 CheyTac cartridge?

Derek: When I was asked to join the Applied Ballistics Team, I needed to get an ELR rifle built in a short period of time. I was under a very tight time schedule to get the project complete. In an effort to eliminate variables, I decided to keep things standard and as simple as possible. I chose the .375 CheyTac for the ease of getting components. The larger rifles are more difficult to get components quickly and I felt like the .375 CheyTac had enough attributes to be competitive at ELR distances.

Could You Hit a Steel Bison at 2240 Yards (1.27 miles) … with Iron Sights?

Impossible as that may seem, that’s exactly what Ernie Jimenez did some years back at the North Springs Shooting Range in Price, Utah (elevation 5,627′). Shooting a milsurp Swiss K31 rifle chambered for the 7.5×55 Swiss round, Jimenez placed four hits on a three-foot-high, bison-shaped steel target placed a staggering 2240 yards from the firing line. Not bad for a rifle which Jimenez acquired many years ago for just $99.00. Of course he did have plenty of misses along the way (and Ernie even managed to hit the plate shielding his camera).

This video is set to start half-way through, when the shooter starts making hits:

The whole process was recorded on video and posted on YouTube. The Long-Range Shooters of Utah say this is an official Guinness World Record for longest shot with iron sights. We can’t confirm that, but it still is an impressive feat. Jimenez had to compensate for a huge amount of bullet drop. His K31’s long-range military sights helped but he still had to aim well over the pink bison. To see how far that target is, watch the video at 14:30 — a camera at the firing line zooms all the way back until the bison is nothing but a tiny dot. The photo below show the target at 8X magnification, but it’s still barely visible.

Here’s the unmagnified, “naked-eye” view from the firing line. Can you see a pink buffalo at all?

Bullet Dropped Over 400 Feet along its Trajectory
To roughly gauge the bullet drop, we took a 7.5x55mm Swiss load from the Hodgdon Reloading Center. With max “book” load of H4350, a 168gr Sierra HPBT has a muzzle velocity of 2524 FPS. According to JBM Ballistics, that bullet will drop over 400 feet during its flight. That’s lot of hold-over! Assuming a 100-yard zero, 59° temp, and 5,600′ altitude, JBM calculates that the drop to 2250 yards is a stunning 210.9 MOA — that’s 4969.9 inches, or 414.15 feet!

In the first part of the video, shooter Ernie Jimenez talks about his hand-loads and his K31 rifle. Here is an example of the distinctive straight-pull K31 (Karabiner Model 1931). Image courtesy AIM Surplus.

Emil Praslick III is widely recognized as one of the greatest wind wizards on the planet — a master at identifying wind value and direction, and predicting wind cycles. As coach of the USAMU and top civilian teams, Emil has helped win many high-level championships. In the three videos we feature today, Emil, who works with Capstone Precision Group (Berger, Lapua, SK, Vihtavuori) and Team Applied Ballistics, explains how to determine wind direction and velocity using a variety of indicators. Praslick, now retired from the U.S. Army, was an 18-time National and 2-time World Champion coach with the USAMU.

Video ONE: Wind Theory Basics — Understanding “Wind Values”

In this video from UltimateReloader.com, Emil explains the basics of modern wind theory. To properly understand the effect of the wind you need to know both the velocity of the wind and its angle. The combination of those variables translates to the wind value. Emil also explains that the wind value may not be constant — it can cycle both in speed and velocity. Emil also explains some of the environmental conditions such as mirage that can reveal wind conditions.

Video TWO: Determining the Direction of the Wind

Key Point in Video — Find the Boil
Emil explains how to determine wind direction using optic. The method is to use spotting scope, riflescope, or binoculars to look for the “Boil” — the condition in mirage when the light waves rising straight up. The wind will generate that straight-up, vertical boil in your optics when it is blowing directly at you, or directly from your rear. To identify this, traverse your scope or optics until you see the boil running straight up. When you see that vertical boil, the direction your optic is pointing is aligned with the wind flow (either blowing towards you or from directly behind you).

Video THREE: The No Wind Zero Setting

In this second video, Emil defines the “No-Wind Zero”, and explains why competitive shooters must understand the no-wind zero and have their sights or optics set for a no-wind zero starting point before heading to a match. In order to hit your target, after determining wind speed and direction, says Emil, “you have to have your scope setting dialed to ‘no wind zero’ first.”

Coach of Champions — Emil Praslick III
SFC Emil Praslick III, (U.S. Army, retired) works with Berger Bullets and Applied Ballistics. Emil served as the Head Coach of the U.S. National Long Range Rifle Team and Head Coach of the USAMU for several years. Teams coached by Emil have won 33 Inter-Service Rifle Championships. On top of that, teams he coached set 18 National records and 2 World Records. Overall, in the role of coach, Praslick can be credited with the most team wins of any coach in U.S. Military history.

In the ELR game, particularly the King of 2 Miles (KO2M), it’s “go big or go home”. The top shooters run large-capacity cartridges that push large-caliber, ultra-high BC bullets at very high velocities. Bullets launched by cartridges such as the .416 Barrett can sustain supersonic velocities at Extreme Long Ranges — and that’s what it takes to win. The .416 Barrett can launch a 550-grain solid bullet at 3000+ FPS.

Photo from ELR Competitor Corbin Shell.

2018 and 2019 Kings of 2 Miles Loaded on RCBS Presses
So how do you load jumbo cartridges such as the .416 Barrett? It takes a big, heavy, super-strong reloading press. We’ve learned that two recent King of 2 Miles champions, Paul Phillips (2019) and Robert Brantley (2018) both loaded their KO2M ammo on RCBS AmmoMaster .50 BMG presses. Phillips loaded .416 Barrett ammo, while Brantley loaded a similar .416 MCS cartridge.

In 2018, Robert Brantley topped the field using his custom .416 MCS cartridge. Then in 2019, Paul Phillips won the K02M competition shooting a .416 Barrett, with Brantley a close second. Both Phillips and Brantley use the RCBS AmmoMaster .50 BMG single stage press kit and RCBS .416 Barrett dies to hand-load for extreme long-range. “My ammo has been much more consistent after switching to the RCBS press and dies,” remarked Phillips, who runs the Global Precision Group. Brantley said he uses RCBS products for most of his reloading needs — from the dies and AmmoMaster, to the ChargeMaster and Brass Boss. His custom .416 MCS loads launch a 550-grain bullet more than 3,100 fps.

Loading with RCBS AmmoMaster .50 BMG Press
This video shows reloading with the RCBS AmmoMaster .50 BMG press. While this video shows .50 BMG cases being loaded, the principles are the same for loading the .416 Barrett cartridge or other big rounds. Big cases need big presses!

33XC — Popular ELR Cartridge
Paul Phillips is a past King of 2 Miles (K02M) winner. The founder of the Global Precision Group, Paul is one of the top ELR marksmen on the planet. He has also been a team-mate of past K02M winners.

In 2019, Paul had this rifle built for the 25-lb max, .338 caliber-or-under ELR Class. This is chambered for the 33XC, an efficient cartridge devised by 11-time National HP Champion David Tubb. With promising initial testing at 500 yards, it looks like Paul’s 33XC project is a success. The rifle’s first match was the NRA Extreme Long Range Championship held in 2019 at Camp Atterbury, Indiana.

Paul reports: “The 33XC is ready… I have tested loads from 3100-3450 FPS and and will settle on a load around 3250 FPS [which is] my most accurate load so far. The Peterson Cartridge brass is really working well.”

Paul states he would like to look for a higher node from 3300-3400 GPS: “Next stop is with the Applied Ballistics LLC mobile labratory and radar testing with a PDM.” Paul cautions: “I encourage everyone to start low and work up. Every chamber, barrel, and components are a little different.”

During initial testing, Paul’s 33XC put three shots in 0.27″ at 100. Then, at 500 yards, the rifle produced a 3-shot group around 1/3-MOA with just 1.22 inches of vertical. That’s pretty impressive for early testing. Paul will also be trying some Berger bullets soon. When he determines the most accurate load, Phillips will stretch the rifle’s legs, shooting out to 2500 yards and beyond.

Quote: “The Cutting Edge Bullets are not the highest BC but they are very stable and consistent at ELR (sub-sonic) ranges and that’s the most important factor in finding the best ELR bullet. I actually test all my bullets at sub-sonic speeds to make sure they are consistent and stable. Finding a good load at 500 yards is just the first part. The real test is shooting them at sub-sonic speeds and see how consistently they group. This is what gives you the highest percentage to impact at 2 miles and beyond.”

CLICK Image for full-screen version.

This rifle features a BAT action mated to a 34″ Bartlein barrel chambered for David Tubb’s new 33XC cartridge. Paul Phillips is currently running Cutting Edge 275gr Lazer solid bullets. Paul notes: “I also have a .338 Lapua Magnum barrel and 300gr Berger bullets for the restricted class in France.” Paul gave special thanks to Alex Wheeler for doing the metal work and Alex Sitman for doing the bedding.

Paul Phillips notes: “Alex Sitman has been bedding rifles stocks for most of his life. I believe that [bedding] is a very important … to keep consistent accuracy and repeatable zeros after traveling all over the globe.”

Even with the TacomHQ Charlie Tarac scope prism in place, the rifle makes the 25-pound weight limit with Duplin Rifles bipod. Paul says: “I love it when a plan comes together!! I’m under by 2 ounces!”

About the 33XC (eXtra Capacity) Cartridge
David Tubb invented the 33XC cartridge because he thought the CheyTac cases were too much trouble — requiring a larger action, oversize presses, and ultra-expensive dies. The 33XC was designed to fit .338 Lapua Magnum-size actions and use normal reloading presses.

The 33XC (eXtra Capacity) has 137.5 grains of H2O capacity with over 125 grains of usable powder capacity while leaving the 0.393″ neck unfilled for bullet seating.

The 33XC has a .338 Lapua Magnum lineage. Think of it as a better, 35°-shoulder .338 LM. David explains: “The 33XC uses standard reloading dies along with a 7/8″ x 14 TPI reloading press. There is no fire-forming — all case ‘improving’ has already been done with a production case that has 20 grains more powder capacity, 35-degree shoulder, and longer neck compared to a .338 Lapua Magnum. This puts the various .338 Lapua wildcats and the Rem Ultra Mag Improved into the ‘also ran’ category. They simply can’t compete with the velocities attainable with the 33XC.”

The 33XC is based off of a .580″ bolt head. Tubb states that “A fired case will extract with little effort when using a properly-polished chamber with a maximum powder charge after resizing with the Superior Shooting Systems FL sizing die.” Tubb’s 33XC die reaches the case head which is important for accuracy. Peterson Cartridge produces the 33XC brass for Superior Shooting Systems. This high-quality brass costs $260 for 100 cases (i.e. $2.60 per case), and can be purchased directly from Superior Shooting Systems.

Bonus Video — Global Precision Group Team Makes 4-Mile Hit

With a .416 Barrett rifle, Team GPG makes a 4-mile impact that is captured on video during team practice. James Devoglaer was shooting his GPG spec .416 Barrett with Team Captain Paul Phillips doing the ballistics and wind. Spotters were David Parrish and Derek Rodgers. Forward Observers were John Droelle and Mauro Del Mastro. Approximately 60 shots were taken before impact. There were four 3-shot groups that measured under 2 MOA at 4 miles. The .416 Barrett cartridges were loaded with 550gr Cutting Edge bullets and Vihtavuori powder.

7070 Yards (4.017 miles)
23.5 seconds time of flight
862 MOA elevation
5.25 MOA wind drift
16.5 MOA spin drift
3.5 MOA Coriolis effect (earth rotation)

Today’s Sunday GunDay story features Corbin Shell’s remarkable, record-setting .416 Barrett. With a 40″ Krieger barrel secured in a massive barrel block, this is definitely a big boomer!

Back in 2019, Forum member Corbin Shell set an Extreme Long Range (ELR) record. With no sighters or warm-up shots, Corbin put three (3) shots on a 36″ x 36″ steel plate at 2118 yards, establishing a Cold Bore ELR World Record (the best at the time). The range was verified with three rangefinders and the string was witnessed by 20+ shooters. In 2019 Applied Ballistics reported: “There is a new official ELR World Record. 2118 yards. 3 for 3 cold bore.” This was also recognized as a record by the FCSA (Fifty Caliber Shooting Association). NOTE: The ELR record has been bettered in more recent years, including a 2298-yard, 3-shot performance in 2020 by Randy Newton.*

This record was set at the ELR Southeast Shootout held at the Arena Training Facility in Blakely, Georgia, on March 2, 2019. The World Record attempt was made in compliance with all ELR Central Rules.

Corbin Shell (on right) stands next to Joe Burdick, match director. That’s three hits on 36″ x 36″ plate.

ELR Ain’t Cheap — $6.55 Cost per Shot
In 2019 Corbin told us: “Each round fired cost approximately $6.55. The breakdown is as follows: bullet $3.05, powder $0.80, primer $0.50, cartridge case $1.00 (based on five firings), barrel wear $1.20 per shot based on 1000 rounds of barrel life. Hitting steel at distance: PRICELESS!”

Editor’s NOTE: With the significant inflation we’ve seen in the past 5 years, with major increases in the cost of powder and primers, we bet today’s cost per shot would be closer to $9.00 per round fired with the same formula including barrel cost.

ELR Record .416 Barrett Rifle Components

Action: BAT .50 caliber EX, multi-flat, with hard coat finish, extra CheyTac bolt.
Barrel: Krieger cut-rifled, .416 caliber, 40″ finish length, 1:9″ twist.
Barrel Block: Doyle Anglin Dixie Gunworks, integral Picatinny rail.
Muzzle Brake: Ryan Pierce 5-port magnum.
Stock: Designed and fabricated by Doyle Anglin, Dixie Gunworks. Obeche laminate, Indian Blanket color scheme. 48″ long excluding butt hardware.
Butt and Cheekpiece Hardware: Master Class/Alex Sitman, extended rods.
Scope: Sightron SIII 6-24x50mm MOA reticle item #25127. 100 MOA elevation/windage.
Bipod: Duplin Rifles by Clint Cooper. Weight: One pound, 2 ounces.
Gunsmith: Rifle builder was Doyle Anglin, Dixie Gunworks, Winder, GA.

ELR Record .416 Barrett Load

Projectiles: Cutting Edge Bullets 550gr Lazers
Powder: Vihtavuori 20n29
Primers: RWS Large
Cartridge Brass: Barrett .416

If you want to learn more about this record-setting rifle, Corbin has prepared a 6-page project history describing all the components and explaining how the rifle was constructed. This Build Document also contains a wealth of information about loading for the .416 Barrett cartridge.

Conditions During Record:
Corbin tells us: “This was shot in Blakely, Georgia at the Arena Training Facility in good Ole dense Southern air. Here are the atmospheric conditions when I shot: 70 degree temperature, 29.70-29.80 inches of mercury, 82% humidity, 1211 Density Altitude (DA).”

Corbin noted that the unique barrel block with rail helps with ELR Optics: “This custom-made barrel block is drilled length wise to reduce weight. It incorporates an integral Picatinny rail which… facilitates mounting of … the Tacom Charlie/Delta TARAC prism system, without the need to bridge mount.” Charlie/Delta TARAC units effectively offset the view that comes into the scope, providing up to 625 MOA elevation.

ELR Cold Bore Shot Record Rules
Congratulations to Corbin Shell for setting an ELR World Record in 2019. This record was shot under a very specific set of rules established by ELR Central and industry leaders. For more ELR record information, go to ELR Central Facebook Page. There you will see more recent ELR Record rifles.

* Prior to Corbin Shell’s performance with his monster .416 Barrett, David Tubb shot a 2200-yard, 3-shot group that has been recognized as a FCSA record. However, because David had made a same-day attempt, within minutes, with a different rifle, this did not comply with the ELR Central Rules. So, officially Corbin Shell was recognized as the ELR Central World Record Holder.

A few seasons ago, Texas gunsmith Richard King built an impressive .50 BMG target rifle for a customer. Equipped with a beefy McMillan stock, this rig has delivered some very impressive accuracy. Check out that target shot during break-in. Using On Target software, we measured this 3-shot group at 0.476″ or 0.454 MOA. Not bad for a beast with VERY serious recoil. Do you think you could beat that 0.476″ with your AR15 shooting puny .223-caliber bullets?

Compare the dimensions of that massive 50-Cal action to a Rem 700 action in the middle. When you’re shooting a Fifty, size matters!

On Facebook, some folks were surprised a guy could wring that kind of accuracy out of a monster .50 BMG. One wag posted: “Yikes! He will need flinch therapy after shooting that beast.”

Another Facebooker joked: “When shooting a .50 BMG you say…In your best Crocodile Dundee voice…that’s not a gun, THIS is a gun!”

Richard King responded that this customer has quite a bit of experience with jumbo-caliber rifles: “Remember this is the guy that shot a .338 Lapua in a two-day F-Class match. Recoil might actually be easier on this 50, given the fact that it has more weight and a brake.”

Richard King showed us the monster 13-lb BAT action for this rifle at the 2018 Berger SWN. Honestly, the big BAT .50 BMG action was HUGE — with the bolt fully extended it was the size of your forearm (to the finger tips). Richard joked “This weighs almost as much as an F-TR rifle (before optic) all by itself”.

Specialty Tools for the Big .50 BMG
Yes, the .50 BMG is one huge cartridge. Thankfully, there are some special tools for loading the jumbo-size round. Giraud Tool produces a specialty comparator for the 50-Cal cartridge. The double-ended .50 BMG comparator is quite versatile. In one orientation you can measure base-to-ogive bullet length and also measure cartridge OAL from rim to bullet ogive. When reversed, you can use the comparator to measure cartridge headspace. Priced at $33.00, Giraud 50 BMG Comparator gauge is constructed of 303 stainless and fits most any vernier, dial, or digital caliper. CLICK HERE for more info.

When we first ran this story a few seasons back, it proved immensely popular with our readers. In case you missed it the first time around, check out what can be done with a factory Savage 110 BA at extreme long range — 1760 yards (one mile). Shooter Mark Dalzell did a great job with the video, which features multiple camera views so you can see the shooter and the target at the same time. Enjoy!

This video by Mark Dalzell demonstrates the long-range capabilities of the Savage 110 BA chambered in .338 Lapua Magnum. Mark took his “BadAss” rig out to the southwest Nevada desert just north of Jean Dry Lakes. He placed a 2’x3′ target way, way out there — a full mile (1760 yards) away. At that range, flight time to target was 3.75 seconds! Sighting with a Nightforce 5-22x50mm NXS scope, Mark needed a few shots to get on target, but eventually made multiple hits, using 67 MOA of elevation and 2.25 MOA left windage. You can view the hits starting at 1:56 time-mark on the video. (Mark had a second camera set up closer to the target — this displays frame in frame in the video, and if you watch carefully you can see the strikes.) The ammo was HSM 250gr HPBT match with a 3.600″ COAL. The shooting was done at 8:13 in the morning, with clear conditions, very light winds. Temp was 57°, humidity 24.5, Density Altitude 3666. Video soundtrack is La Grange by ZZ Top.

Good Shooting Mark. That’s darn good for a factory rifle. You also had the elevation dialed in real close before the firing started! That shows a good knowledge of your ammo’s long-range ballistics. We also noticed how effective that muzzle brake was. Recoil looked about the same as an un-braked .308 Win.

.338 Lapua Magnum Cartridge Diagram

If you thought Mark’s 1760-yard shooting was impressive, Mark has produced another video that shows a session at even greater distances — out to 2300 yards. Watch Mark Dalzell Shoot at 2300 Yards.