|
|
May 30th, 2008
Most of the Tikka 595s that made it to the States came with a synthetic stock or rather ordinary wood stock. Right now, on Auction Arms, there’s a very clean Tikka 595 with a really nice stock in highly-figured walnut with contrasting forearm tip. Chambered in 22-250, it’s a very handsome rifle, and the 595 action is slick and strong. We’re hoping one of our regular readers snags this gem. Current bid price is $625.00. Forum member Fireball tells us the Tikka 595 22-250 magazines will also feed 6BR and 22BR cartridges well if you plan to re-barrel this rifle and chamber a different cartridge. We’d just shoot it “as is”, at least until the barrel wore out.
May 28th, 2008
 Increasing the numbers of women involved in the shooting sports is vital. We need to bring in more women shooters to grow our gun clubs’ membership rolls and expand the consumer base for firearms products. From a political standpoint, getting women involved in shooting strengthens the gun rights movement, and helps counter efforts to close gun ranges and shooting facilities. Anti-gun advocacy groups and “liberal” politicians bank on the fact that most women are either opposed to firearms or are apathetic about gun rights. As more females get involved with shooting, it becomes more difficult for gun opponents to claim support from the “silent majority” of Americans. Also, women are important decision-makers at the family level. Wives often decide if there will be a gun in the house and if children in the family are allowed to participate in shooting sports.
This week’s ShootingUSA television episode features the NRA’s Women On Target program. This unique program offers firearms training and hunting excursions exclusively for women. The Women On Target program offers new lady shooters the chance to receive handgun, rifle, and shotgun instruction by other women, in a low-stress situation.
CLICK HERE to Find a Women on Target Instructional Clinic
The popular Women-Only Hunt Program allows women to enjoy the outdoors with experienced outfitters guiding all female clients. A wide variety of hunts are offered in the second half of 2008 including duck/goose hunts, pheasant hunts, turkey hunts, whitetail deer hunts, and even a Rocky Mountain Elk hunt. This program has been operating successfully since 1999.
CLICK HERE for Hunt Dates and Outfitter List
Photos courtesy National Rifle Assn., All Rights Reserved.
May 10th, 2008
The Barnes Triple-Shock X-Bullet has long been considered one of the best hunting bullets for game hunters. The all-copper construction provides excellent expansion and very high weight retention. The absence of a lead core means this bullet is also legal in areas (such as parts of California) where lead-containing bullets are banned.
The big innovation in the new Tipped TSX bullet is the addition of a polymer tip. The tip increases the bullet’s Ballistic Coefficient (BC). Additionally, polymer-tipped bullets show less bullet-to-bullet variance in BC than do conventional bullets. More uniform BC can make your point of impact at long range more predictable, shot after shot.
The TSX bullet, like the previous Triple-Shock, has grooves, or “drive bands”, formed in the outer casing. This effectively reduces the bearing surface. The use of drive bands is a proven bullet technology that can reduce friction and barrel copper fouling, while allowing higher velocities for a given bullet weight.
The TSX bullet is available in these calibers and weights:
April 7th, 2008
Robert Whitley has produced a new video showcasing an AR15-based varminter chambered in the 6mmAR cartridge, a 6.5 Grendel necked down to 6mm (.243). In the video, Robert cycles through ten rounds (two magazines) loaded with Hornady 87-grain BTHP bullets (item 2442, 0.376 BC). The rifle features a custom 6mmAR upper with a side charging handle. Note the ease with which Robert operates the charging handle from the prone position. The 6mmAR cartridge allows an AR shooter to use high-BC 6mm projectiles with superior down-range energy. Robert offers complete uppers and other accessories. For more information and load data, visit 6mmAR.com.
CLICK HERE to WATCH VIDEO
April 5th, 2008
We’ve known some serious varminters who will invest $4,000.00 in a custom rifle, pay thousands more for spotting scope and laser rangefinder, and spend countless hours loading ultra-precise ammo. Yet, when they head off to the prairie dog fields, they’ll omit an essential piece of gear that will make the difference between a hit and a miss.
 We’re talking about windflags. Many casual shooters, varmint hunters, and even some “tactical” shooters disdain windflags as gadgets suited only for the accuracy-obsessed benchrest crowd. In fact, windflags are just as important for the varminter as for the benchrest competitor.
You may think that you can easily notice a major wind shift. But consider this, a change from a light 2.5 mph left breeze to a 2.5 mph right is a 5 mile per hour switch. That is enough to make you miss a prairie dog even at just 200 yards. Here’s a chart that shows the effect of a 5 mph full-value (i.e. 90-degree) wind change at various distances. The values assume a typical .250-BC varmint bullet launched at 3500 fps at a 3″-wide critter (center hold).
You don’t need to spend a lot of money on windflags. Even a bit of surveyors’ tape on a post is better than nothing. As Forum member Catshooter explains, a simple windflag, placed at your shooting station, helps minimize the effect of cross-winds. If you align your shooting position so the breeze is at your back you can shoot with greater confidence even in high winds. Watch the way the windflag blows, and shoot at the dog mounds that are directly downwind.
Our friend Boyd Allen offers another tip: “When you go varminting, be sure to bring some kind of portable target stand. Accuracy or zero problems are much easier to diagnose and remedy if you can set up a target at 100 yards. A simple wood, A-Frame design, hinged at the top, works well, stores flat, and is easy to build.”
Windflag photo courtesy Flying Fish Fundamentals, makers of single-and dual-vane wind flags.
March 24th, 2008
The Hickory Shoot, the nation’s most popular groundhog shooting competition, is slated for April 5th this year. Now in its 28th year, this is the biggest Varmint competition on the East Coast, with over $4000.00 worth of prizes awarded each year, including $1000.00 in cash. Compete individually or as part of three-man teams. The entry fee is $25 per person, plus (optional) $10 extra per team. The match will be held in Vale, North Carolina. For MapQuest or Google maps, use this address: 8216 Will Hudson Road, Lawndale, NC 28090.
This year, there will be three targets, set at 100, 300 and 500 yards. (No unknown distance). In the past, 6BRs, 6BR Improveds and the mid-size 6mms have been the calibers to beat. To see what it takes to win, read this article about Harold Seagroves’ Spencer-built 6BR, which has won the Hickory Shoot multiple times.
The range will be open Monday-Friday preceding the match for practice. The match will start 8 o’clock sharp Saturday morning the 5th. If you have any questions call Larry Willis, Bulls Eye Sporting Goods, (704) 462-1948. This year the targets will be at known distances, 100, 300, and 500 yards. That should be a cake walk for you 1000-yard shooters.
March 22nd, 2008
 On LongRangeHunting.com, you’ll find a good article about wind reading by Shawn Carlock. Shawn Carlock is a veteran law enforcement marksman and the current USPSA national precision rifle champion. Shawn offers good advice on how to estimate wind speeds and directions using a multitude of available indicators — not just your wind gauge: “Use anything at your disposal to accurately estimate the wind’s velocity. I keep and use a Kestrel for reading conditions….The Kestrel is very accurate but will only tell you what the conditions are where you are standing. I practice by looking at grass, brush, trees, dust, wind flags, mirage, rain, fog and anything else that will give me info on velocity and then estimate the speed.”
Shawn also explains how terrain features can cause vertical wind effects. A hunter positioned on a hilltop must account for bullet rise if there is a headwind blowing up the slope. Many shooters consider wind in only one plane — the horizontal. In fact wind has vertical components, both up and down. If you have ever piloted a small aircraft you know how important vertical wind vectors can be. Match shooters will also experience vertical rise when there is a strong tailwind blowing across an up-sloping berm ahead of the target emplacements. Overall, Shawn concludes: “The more time you spend studying the wind and its effect over varying terrain the more successful you will be as a long-range shooter and hunter.”
February 28th, 2008
Quite a few of our hunter friends have praised the DedNutz scope mounting system. This is a unitized one-piece base AND ring system. Because the rings are integral with the scope base, you won’t encounter any potential misalignment between the front and rear base. You also eliminate the need to keep the rings torqued securely to a separate base. The rigid DedNutz design has no moveable parts between the firearm and the scope.
Made of milled, anodized aluminum, the one-piece DedNutz scope mounting system is one-third the weight of most other one-piece base and ring mounts and it can’t rust. For target rifles with a Weaver or Picatinny-style base, we still advocate the use of Burris Signature Zee rings. However, if you are looking for a sturdy, more rugged scope-mounting set-up, the DedNutz system fits the bill. It would be a good choice for a walk-around varminter or a deer rifle. Because the front and rear rings are precision CNC-machined, DedNutz says that it’s not necessary to lap the rings. We still recommend you inspect the ring edges and lightly debur as necessary. If you choose to lap the rings, do it gently as the inside should be very concentric already and you don’t want to grind through the anodizing.
One DedNutz user, writing on huntingnet.com, comments: “I bought a pair of DedNutz for a Browning A-Bolt and a pair of Talley Lightweights for the same gun. I have to tell you that I think these DedNutz rings are some of the most rugged rings I have seen and yet are very lightweight. If you saw the length of the cap screws and the size of the base screw heads you would be amazed. The [DedNutz] have a superior finish to the talley lightweights … and they are better machined. I put a lapping bar on both and the talleys needed it but not the DNs.”
DedNutz scope mounts are available to fit dozens of different hunting rifles. They are offered in 1″ and 30mm sizes, in matte silver, matte black, or Realtree Camo finishes. DedNutz scope mounts start at about $50.00 and can be purchased from MidwayUSA.com, or direct from DedNutz.com.
CLICK HERE to watch VIDEO
February 22nd, 2008
Scott S., aka “Sunbuilder” in our Forum, recently completed an interesting project gun. This is a lightweight, compact “calling rifle” chambered in 6mmBR. The gun features a Stiller Predator Repeater action with Lilja 1:12″ twist, #4 contour barrel. To get the short, fat 6BR rounds to feed from the magazine, Scott did the Mike Bryant Mag Conversion. Scott reports the rifle now “feeds great.” This simple conversion involves blocking the rear of the magazine and shortening the follower.
Scott’s 6BR calling rifle wears a Zeiss Conquest 3.5-10×44 scope on top. This is a nice, bright optic with a sensible magnification range for game that is normally on the move. The rifle was built by Neil Jones in Saegertown, Pennsylvania. Along with his 6BR Lilja barrel, Scott has a second barrel chambered in 6.5×47 Lapua Improved, and Scott is “thinking about doing a 20 VarTarg barrel too.” That would give him a range of three calibers, with projectiles ranging from 30 grains to 130+ grains.
February 17th, 2008
The 17 HMR rimfire round has been a huge success since its introduction. Millions of rounds have been sold, the major rifle-makers all offer 17HMR rifles, and varminters worldwide have embraced this innovative, high-velocity rimfire cartridge.
However, as 17 HMR costs climb steadily upward, many shooters are considering switching back to the 17 HMR’s little brother, the 17 Mach 2. Based on a 22 Stinger case necked down to 17 caliber, the 17 Mach 2 runs about 450 fps slower than the 17 HMR. However, the 17 Mach 2 still offers much-enhanced performance compared to a 22LR (See Chart.)
Ten Cents a Round vs. 26 Cents a Round
The big factor favoring the 17 Mach 2 is PRICE. You can shoot the 17 Mach 2 for $0.10 per round compared to $0.26 for the 17HMR. The Mach 2 is less than half the cost of 17HMR. Here is a chart showing current pricing of the 17 HMR vs. the 17 Mach 2.
| Cartridge |
Brand |
Bullet |
Price/box |
Vendor |
| 17 HMR |
CCI |
17gr Speer TNT |
$12.14 |
MidwayUSA |
| 17 HMR |
CCI |
20gr SpirePt |
$13.79 |
MidwayUSA |
| 17 HMR |
Hornady |
17gr V-Max |
$12.79 |
MidwayUSA |
| 17 HMR |
Hornady |
20gr XTP |
$12.99 |
MidwayUSA |
| 17 Mach 2 |
Eley |
17gr V-Max |
$4.89 |
MidwayUSA |
| 17 Mach 2 |
Hornady |
17gr V-Max |
$5.79 |
Midsouth |
| 17 Mach 2 |
Rem |
17gr V-Max |
$3.99 |
Natchez |
17 HMR Average Price = $12.93 (26 cents per round)
17 Mach 2 Average Price = $4.89 (10 cents per round)
We’ve done extensive testing with the 17 Mach 2 in a Hall-actioned benchrest rig built by Stan Ware of SGR Custom Rifles. With ammo sorted for length and concentricity (using a Nielson Brothers concentricity gauge), our little 17 Mach 2 has demonstrated remarkable accuracy–with many 1/4″ groups at 50 yards. Still, even with sorted ammo, don’t expect the 17 Mach 2 to run with the best (i.e. $14/box) 22LR match ammo. Typically, with the 17 Mach 2, you’ll get one shot out of five landing unpredictably out of the group. There are many reasons for this — excessive run-out, flawed bullet tips, bad crimps, even shaved jackets.
Our studies suggest that 17 Mach 2 ammo would be more consistent, and more accurate, if it was loaded to a lower muzzle velocity with the bullet seated longer. Crimping needs to be more uniform. We’d also like to see Hornady chamber the 20gr XTP bullet offered in the 17 HMR. Still, the 17 Mach 2 round has much to offer the varminter and club-level paper puncher. It runs 1000 fps faster than a 22LR, and bucks the wind much better than a 22LR at 100 yards. At $4.00 to $5.00 a box, it is less than half the cost of 17 HMR, and one-third the cost of the super-premium 22LR.
We let three top 22LR benchrest shooters try our 17 Mach 2 recently. To a man, they agreed this round is “fun to shoot” and “offers great promise”. If the ammo-makers can improve quality control, this round may, some day, have a place in target competition, particularly with the highest-grade 22LR ammo now topping $20.00/box (for new Lapua X-ACT ammo).
Here are ONE HUNDRED-Yard Groups Shot with Eley 17 Mach 2 Ammo. Note HUGE Effect of Concentricity Sorting. Top target shows 0.006″ Run-out ammo. Bottom Target displays 0.001″ Run-out ammo.
|
