Last summer we published our comprehensive 6.5×47 Lapua Cartridge Guide, researched by the 6.5 Guys. In case you’ve been wondering what kind of accuracy is possible for a tactical-type rifle chambered for this mid-sized cartridge, check out this tack-driver built by gunsmith Ryan Pierce. That’s a mighty impressive 0.206″ five-shot group fired with Berger 140gr Hybrids using a Brux cut-rifled barrel. The powder was Hodgdon H4350, a very good choice for this cartridge.
Ryan reports: “Here is a 6.5×47 I built for a customer. It features a trued Rem 700 action, Brux 1:8″ Rem varmint-contour barrel, Mcmillan thumbhole stock, Surgeon bottom metal, and 3-port muzzle brake. The customer’s preferred load is the same that has worked in the last couple dozen 6.5x47s I’ve built: 41.1-41.3 grains of H4350 with 140 hybrids .050″ off the lands. This should run about 2810-2815 fps from a 26″ barrel. The 3.128″ refers to length of a loaded round from the base to ogive including the Hornady ogive comparator tool.”
Are you looking to improve your long-range shooting? Doubtless you’ve been thinking about upgrading your rifle or optics, but wonder what to buy (and how to get the best “bang for your buck”). In this video, Bryan Litz of Applied Ballistics offers “solid gold” advice on equipment selection for mid-level shooters (i.e. those who are somewhere between “newbie” and “Master of the Universe”). Bryan explains the logical first step is a barrel upgrade — a new tube from a top-barrel maker can make a huge difference. Then you should research the best factory ammo for your rifle, or get started in precision hand-loading. Bryan also offers advice on choosing a scope and optics accessories.
Equipment Upgrades: Barrel, Optics, Ammoby Bryan Litz
Every equipment element can be upgraded. You can run that factory rifle for a period of time, but the barrel eventually is going to be what holds you back. The twist rate probably won’t be fast enough to stabilize the high-BC bullets that you want to shoot at long range. So, the first thing you want to upgrade on your factory rifle is probably going to be the barrel. [With a new custom barrel] you’re going to get a fast twist rate, you’re going to get a chamber that’s optimized with a throat for your … bullet. And a good quality custom barrel is going to be easier to clean, won’t foul out as much, and it’s going to improve to overall accuracy and precision of your shooting. Barrel swaps are very common and routine thing for gunsmiths to do.
The next thing is improving your scope. If you don’t have a quality optic it’s going to hold you back. The job of the scope is to precisely and perfectly delineate [the target] within a half a degree (from 100 to 1000 yards is only a half a degree). The scope has got to put you on the money within that half a degree. So, it’s not a piece of equipment you want to go cheap on.
The other big factor is your ammunition. Getting into hand-loading is meticulous and it takes a long time to learn, but ultimately you’ll be making ammunition that is tailored for your rifle, and there simply won’t be anything better for your rifle than what you can develop through individual handloads.
So that’s typically the upgrade path: Get your factory rifle re-barreled, don’t skimp on a scope (or anything that attaches to it), improve your ammunition (whether by upgrading to better factory ammo or hand-loading on your own). All through this process is continuous learning… Once you have the best equipment (and it doesn’t get any better), the process of learning and education never ends. That is something you build on every single time you go to the range, and it’s what going to allow you to continually improve your skills.”
No matter what kind of rifle you shoot, whether it be an AR or a brenchrest rig, the principles are the same — develop a good load, learn the gun, hone your wind-reading skills, and practice in all conditions. Making a video of a practice session can help you identify and correct bad habits.
Bryan Litz says “don’t skimp on your scope”. Purchase a quality scope, rings, and scope level. Successful long-range shooting all begins with your view of the target.
Even with a top-of-the-line F-TR rig like this, you still have to practice diligently, putting in the “trigger time” needed to improve your game.
Planning to put together an AR-platform rifle? Or are you looking to upgrade your AR with a new barrel, stock, or trigger group? Then you should check out the AR-15 Rifle Build DVD from our friends at UltimateReloader.com. This DVD covers all the details of a custom build, using high-resolution video sequences, and helpful supporting graphics.
In this DVD, Gavin Gear guides you through the entire process including selecting components, acquiring and using the necessary tools, assembly steps and details for each component, and even mounting a scope. Building an AR-15 can be overwhelming, but with the right guidance and help it’s not difficult and is a lot of fun. With this DVD you’ll be able to build your AR-15 with confidence.
Right now, as a New Year’s promotion, the AR-15 Build DVD is on sale for just $9.90 (plus $3.80 shipping/handling). This DVD can pay for itself many times over by showing you how to do your own gunsmithing (and get quality AR components at attractive prices).
We often get questions about the 6.5 Creedmoor Cartridge — folks ask where they can find good resources for this cartridge, which is popular with Across-The-Course, High Power, and tactical shooters. We did some searching and found that the August 2011 digital edition of Shooting Sports USA has a good article for all fans of the 6.5 Creedmoor.
Development of the 6.5 Creedmoor Cartridge
In the August 2011 Edition of Shooting Sports USA you’ll find a lengthy feature on the 6.5 Creedmoor cartridge. This story covers the origin of the cartridge and its performance both as a match cartridge and as a hunting round. Hornady Chief Ballistician Dave Emary explained: “the original intent of the cartridge was as an across-the-course match cartridge. We envisioned it as an off-the-shelf round that would produced the accuracy and ballistics to compete in all match disciplines right out of the box. At the same time we realized that the same characteristics would make an exceptional hunting cartridge with the right bullets.”
6.5 Creedmoor Brass No Longer Washed After Annealing
Here’s an interesting update on Hornady 6.5 Creedmoor brass and loaded ammo. In a move to improve case quality and neck uniformity, Hornady recently changed the 6.5 Creedmoor production process, eliminating the case-washing step after annealing. So now you will see annealing coloration on 6.5 Creedmoor brass, just like on Lapua brass. Dennis DeMille of Creedmoor Sports wanted to improve the consistency/uniformity of 6.5 Creedmoor case-necks. At Dennis’ suggestion, Hornady conducted tests which showed that the “standard industry practice” of washing brass could potentially alter the necks in undesirable ways. Bottom line, unwashed annealed brass was determined to have an accuracy edge over washed brass. Looking at these results, Hornady decided to forgo the post-anneal washing process. As a result, the latest 6.5 Creedmoor brass now displays the distinctive coloration left by neck/shoulder annealing. Learn something new every day, eh?
Keanu Reeves, the A-List Hollywood actor who starred in The Matrix, Speed, Point Break, and other hit movies, is a talented shooter. For his role in the popular John Wick series of movies, Reeves has done extensive training with our friend Taran Butler, one of the nation’s top 3-Gun competitors. Check out this video showing Keanu Reeves running through some multi-gun stages. The actor’s speed on target is outstanding, and his transitions are very fast. We’ve run some multi-gun matches in the past. Trust us, it takes a lot of training and dedication to get this fast. You also need good equipment.
Watch Keanu Reeves Display Impressive Multi-Gun Speed in this Video:
Here’s a tale that should make you chuckle. This is the kind of boo-boo any shooter can make (but hopefully only once). Our friend Vu Pham from Sacramento was out testing his .260 Rem tactical rifle. Now Vu, an ace NorCal Tactical marksman, is a darn good shooter — but his first three-shot, 200-yard group looked like a shotgun pattern. Vu was puzzled to say the least. (His actual reaction, as noted on the target, was “WTF?!”)
But there was a simple explanation for the rifle’s miserable accuracy — Vu forgot to tighten the crossbolts attaching the rings to his scope rail. Consequently, his scope was moving after each shot. According to Vu, stunned disbelief followed by embarrassment happens “the moment you realized you forgot to torque your scope rings to the base after moving [the scope] the night before. [I felt like a] Freaking nooooob.”
If you like long-range shooting, you’ll love this video…
This well-made HD video showcases the operations of the Leupold Optics Academy. The Academy is a combined classroom and field training program focusing on advanced marksmanship skills for tactical shooters and long-range hunters. The field segment includes technical briefings, practice with mildot ranging, shooting from a variety of positions, and extreme-long-range sessions. At a private, backcountry range contracted by Leupold, Academy participants can engage targets out to 2200 meters. We think you’ll enjoy the video. We’d love to get a chance to shoot at that range.
Video find by EdLongrange. We welcome reader submissions.
This Wednesday (February 3, 2016), Shooting USA TV features the 2015 GAP Grind Pro-Am held at the K&M Shooting Complex in Finger, TN. Conducted in association with the Precision Rifle Series (PRS), the GAP Grind features a Pro/Am format with professional and amateur competitors vying for individual glory and team honors.
Here is Shooting USA Host John Scoutten (in Blue/White shirt)
Lots of Action, with 20+ Stages
The GAP Grind is a notoriously challenging, “high tempo” match with minimal down-time between stages. Over the course of 20+ stages, competitors will fire 200+ shots at a variety of steel, paper, moving, and reactive targets out to 1,200 yards. Targets vary in size/difficulty based on the shooter’s position, distance, and time allotted. Most stages include “stressors” — i.e. time limits or required movement(s).
GAP Grind Hardware Shelley Giddings, a skilled shooter of both firearms and cameras, snapped these images of state-of-the-art tactical rifles at the 2014 GAP Grind. See more firearms images on Shelley’s Facebook Page.
Any blade-aholics out there? Here’s a handy product we recommend for anyone with a sizeable collection of quality knives. The Sack-Ups Knife Protector roll-up pouch is made from silicone-treated synthetic fabric. The pouch protects blades and tools while helping to prevent rust. (Since leather retains moisture, you don’t want to leave blades in leather sheaths.) While Sack-Ups roll pouches were designed for knives, they can be used to hold other shooting items, such as bolts, loading dies, or expensive tools. The synthetic fabric wicks away moisture. (Nonetheless, we recommend that steel items receive a light coat of a good corrosion-inhibiting oil before long-term storage.)
TIP: You Can Use Sack-Ups to Store Loading Dies, Spare Gun Parts, and Steel Tools
The protective pouch has a flap over the top and tie cords to secure the pouch when it is rolled up. Available from Amazon.com (and other online vendors), the model 802 6-slot Sack-Ups Knife Pouch retails for about $15.00, while the 10-slot knife pouch costs $18.30 on Amazon.com. Larger 12-, and 18-slot Sack-Ups Roll-up Knife Pouches are also offered. For example, the model 801, shown below, holds a dozen knives or tools up to 5″ in length.
At the SAKO/Tikka booth at Shot Show, we saw some tactical shooters admiring the smooth Tikka T3 action and crisp trigger. They liked the action but they told us they wished they could get the T3 action in a configuration similar to the Ruger Precision Rifle. Well folks, there is a way to build a Tikka T3-based tactical/practical rig.
Gary Eliseo of Competition Machine offers a tubegun chassis for Tikka T3 actions in both Target and Tactical versions. The T3 kit is set up for AICS short action magazines. This is a “no gunsmithing” installation — no modifications to the action are required and the chassis kit works with the factory T3 trigger and safety. Along with the new Target and Tactical versions, a lower-cost Light-Weight Hunter T3 Chassis is also offered which accepts most AR-type buttstock assemblies.
Tikka’s T3 action is a very nice unit that works well as the centerpiece of a precision rifle. The T3 action is rigid and robust. It cycles smoothly and has a short 75° bolt lift. The T3 features a Sako-style extractor, with angled-leading-edge bolt lugs for smooth lock-up.
The T3 action can be installed in Gary’s Chassis Kit with either a recoil disc (and bolts) or glue-in action mounting. Price for the Tactical model is $1020.00, with a rugged Cerakote finish. Price for the Target version is $925.00 with a powdercoat finish or $1000.00 with a Cerakote finish. The Light-Weight Hunter chassis (that accepts owner-installed AR-type buttstocks) starts at $685.00. Tikka T3 action and AICS 5-round or 10-round magazines sold separately. For more info, visit GotXRing.com, call 714-630-5734, or send email to: spraynandprayn [at] gmail.com . CLICK HERE for order page.
6.5 Creedmoor Brass No Longer Washed After Annealing
Here’s a tale that should make you chuckle. This is the kind of boo-boo any shooter can make (but hopefully only once). Our friend 
Tikka’s T3 action is a very nice unit that works well as the centerpiece of a precision rifle. The T3 action is rigid and robust. It cycles smoothly and has a short 75° bolt lift. The T3 features a Sako-style extractor, with angled-leading-edge bolt lugs for smooth lock-up.
