The United States Postal Service allows shipment of long-barreled rifles and shotguns via the U.S. Mail. However, regular citizens who do not possess an FFL are NOT allowed to mail handguns at all.* For handguns (all pistols and revolvers), you must use UPS or FedEX and ship FROM an FFL business in most situations.
432.1 General
Mailers must comply with the Gun Control Act of 1968, all of the provisions of postal law in 18 U.S.C. 1715, and all other all federal and state regulations and local ordinances affecting the movement of firearms. The following also applies:
a. The Postal Service may require the mailer to open parcels containing firearms or air guns or give written certification that the weapon is unloaded and not concealable (see note 1).
b. Short-barreled rifles or shotguns that can be concealed on the person are non-mailable.
c. No markings of any kind that indicate the nature of the contents may be placed on the outside wrapper or container of any mailpiece containing firearms.
d. Mailable matter must be properly and securely packaged within the general packaging requirements in DMM 601.1-7.
e. Except for shipments between licensed dealers, manufacturers, or importers, all regulated firearms must be mailed using a USPS product or Extra Service that provides tracking and signature capture at delivery (see note 2).
432.3 Rifles and Shotguns
Except under 431.2, unloaded rifles and shotguns are mailable. Mailers must comply with the rules and regulations under 27 CFR, Part 478, as well as state and local laws. The mailer may be required by the USPS to establish, by opening the parcel or by written certification, that the rifle or shotgun is unloaded and not ineligible for mailing (see note 1). The following conditions also apply:
a. Subject to state, territory, or district regulations, rifles and shotguns may be mailed without restriction when intended for delivery within the same state of mailing. These items must:
1. Bear a “Return Service Requested” endorsement.
2. Be mailed using a class of mail, product, or Extra Service that provides tracking and signature capture at delivery.
b. A rifle or shotgun owned by a non-FFL may be mailed outside the owner’s state of residence by the owner to himself or herself, in care of another person in the other state where he or she intends to hunt or engage in any other lawful activity. These mailpieces must:
1. Be addressed to the owner.
2. Include the “in the care of” endorsement immediately preceding the name of the applicable temporary custodian.
3. Be opened by the rifle or shotgun owner only.
4. Be mailed using a class of mail, product, or Extra Service that provides tracking and signature capture at delivery.
d. Mailing of rifles and shotguns between licensed FFL dealers, manufacturers, or importers are not restricted. The Postal Service recommends that these items be mailed using a class of mail, product, or Extra Service that provides tracking and signature capture at delivery.
e. Except as described in 432.3a, licensed curio and relic collectors may mail firearms meeting the definition of curios or relics under 27 CFR 478.11 domestically to licensed FFL curio and relic collectors in any state. These items must be mailed using a class of mail, product, or Extra Service that provides tracking and signature capture at delivery.
f. Firearms meeting the definition of a rifle or shotgun under 431.4 which are certified by the curator of a municipal, state, or federal museum, which exhibits firearms to be curios or relics of museum interest, may be accepted for mailing without restriction when mailed between governmental museums.
g. Air guns (see 431.6) that do not fall within the definition of firearms under 431.1a are mailable. A shipment containing an air gun with a muzzle velocity of 400 or more feet per second (fps) must include an adult signature service under DMM 503.8. Mailers must additionally comply with all applicable state and local regulations.
FOUR TIPS for Safer, More Secure USPS Firearms Shipping
Here are some other helpful suggestions when shipping long guns via USPS:
1. Bring a copy of the destination FFL holder’s license to the Post Office, just in case the staff asks for confirmation.
2. Use a Shipping Mode that Requires Signature on Delivery for confirmation.
3. Ship Priority Mail for faster delivery and BUY INSURANCE to cover complete replacement value of the firearms. Some guns may be damaged, but insurance is needed to cover full gun value with a lost/stolen shipment.
4. Double tape the ends of the box, and put plenty of padding around the muzzle and buttstock INSIDE the box.
* While ordinary (non-FFL) person may never mail handguns, there are some types of handgun mail shipments allowed by manufacturers etc. to Government and U.S. Military recipients:
432.21 Authorized Persons
Subject to 432.22, handguns may be mailed by a licensed manufacturer of firearms, a licensed dealer of firearms, a licensed importer of firearms, or an authorized agent of the federal government or the government of a state, territory, or district, only when addressed to a person in one of the following categories for use in the person’s official duties, and upon filing the required affidavit or certificate:
a. Officers of the Army, Coast Guard, Air Force, Navy, Marine Corps, or Organized Reserve Corps.
b. Officers of the National Guard or militia of a state, territory, or district.
c. Officers of the United States or of a state, territory, or district, whose official duty is to serve warrants of arrest or commitment.
d. USPS employees authorized by the Chief Postal Inspector.
e. Officers and employees of enforcement agencies of the United States.
f. Watchmen engaged in guarding the property of the United States, a state, territory, or district.
g. Purchasing agent or other designated member of agencies employing officers and employees included in 432.21c through e.
432.23 Manufacturers, Dealers, and Importers
Handguns may also be mailed between licensed manufacturers of firearms, licensed dealers of firearms, and licensed importers of firearms in customary trade shipments, or for repairing or replacing parts.
This article is Copyright 2023 AccurateShooter.com. Any entity reproducing this article without permission is liable for compensatory and punitive damages.
Brownells invites customers to help celebrate the grand opening of the new. mobile-friendly Brownells website which debuted 2/27/2023. The new version of www.Brownells.com is optimized for mobile devices and features upgraded search functions along with a Blog and Content section. Throughout the Grand Opening celebration, visitors to the Brownells.com can expect great deals on products from Magpul, Leupold, Smith & Wesson, Federal, Hornady, Vortex and other leading companies.
Potential Brownells Discount Codes
Brownells has discount codes that can save you serious cash. Here are some of the current codes. Add these during check-out. NOTE: Most of these can expire at any time. If one code doesn’t work, try another.
TRIGGERED: 10% OFF
Winter40: $40 Off $275.00+
Winter30: $30 Off $215.00+
30off215: $30 Off $215.00+
COLD30: $30 Off $215.00
CART30: $30 Off $200.00
TA10: 10% Off $150.00+
WLS10: 10% Off $150.00+
BACK15: $15 Off $150.00 or more
HOME10: $10 Off $100.00 or more
SMSAVE: $10 Off $100.00+
GIFT10: $10 Off $100.00+
Q63: FREE Shipping $99.00+
SITESHIP: FREE Shipping $199.00+
Gun Room Giveaway Contest
The centerpiece of the New Website Grand Opening celebration is the Gun Room Giveaway, worth over $12,000.00. One lucky winner gets everything needed to fully outfit a gun room — including guns, ammo, accessories, optics, magazines, tools and cleaning supplies.
In addition to the grand prize, the Gun Room Giveaway offers a $1,000 Brownells gift card for second place, and a $500 gift card for third place. Contestants can enter via the Gun Room Giveaway page until March 5, 2023.
The Gun Room Giveaway is sponsored by SIG Sauer, Colt, Remington, Magpul, Hornady. Otis, Wheeler Engineering, and other leading companies.
Many Great Deals at Brownells.com Now
There are scores of great deals currently. Here are a few examples:
Kestrel wind and weather meters are often regarded as the best on the market — for good reason. Here are a series of three videos by F-Class John that show how the Kestrel 5700 with Elite Ballistics works. This article reviews the advanced Kestrel 5700 Elite Wind Meter with sophisticated ballistics capabilities. Our review features three videos by F-Class John that show how the Kestrel 5700 Elite functions with Applied Ballistics APP software and LiNK connection.
This Part I Video starts with a basic Kestrel Anemometer (blue case, 00:00-00:40) wind meter. Then reviewer F-Class John looks at the “smart” Kestrel 5700 with Elite Ballistics. John explains the many features of the Kestrel 5700 and how it holds a powerful ballistics calculator in the convenient, easy-to-tote Kestrel package. With Elite Ballistics, once you enter data about your bullets, velocity, zero, and rifle, the Kestrel can calculate come-ups and wind corrections. If you don’t yet own a Kestrel, we highly recommend you watch this series of videos that explains advanced Kestrel features in detail.
This Part II Video shows the key features of the advanced software APP used by the Kestrel 5700 unit with Elite Ballistics. The Kestrel 5700 can “talk” to a mobile device that runs the Applied Ballistics software APP that contains bullet databases and allows you to enter key information such as muzzle velocity, bullet BC, zero distance, velocity, wind, and environmental factors (altitude, temperature etc.). There are also gun-specific factors such as scope height over bore and barrel twist rate. The video also explains how “range cards” are created and how to view them with your Elite Ballistics-enabled Kestrel. John notes: “The APP is great because you don’t have to fiddle with the Kestrel’s buttons. It’s much easier to enter data and change settings with the APP.”
This Part III video shows how to determine true wind direction by aligning the SIDE of the unit into the wind. You essentially want to set the unit 90 degrees to the wind direction so the impeller runs as slowly as possible. Then, after you set your target distance (See 3:03), the unit can give you precise come-ups for your intended target (10.28 MOA for 559 yards here). The Kestrel then calculates the cross-wind correction as well (See 3:12).
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, the video author may receive a small commission. This helps support F-Class John’s YouTube channel and allows him to continue to make videos like this.
It’s good to see we are moving back to normalcy in the post-pandemic era. Witness the Great American Outdoor Show (GAOS). This big NRA event in Pennsylvania drew over 200,000 attendees, an increase of over 35,000 from last year.
NRA publication Shooting Sports USA reports: “More than 200,000 people packed the exhibit halls at this year’s NRA Great American Outdoor Show, held at the Pennsylvania Farm Show Complex and Expo Center in Harrisburg, PA, from February 4-12. Our nation’s hunting and outdoor heritage was on full display, as more than 1,000 exhibitors covered 650,000 square-feet to present the latest and greatest in products, gear and technologies, as well as booking once-in-a-lifetime hunts and fishing trips in America and abroad.
The 200,000 attendees at GAOS in 2023 mark a 35,000 improvement over last year’s total. Throughout the nine-day show, leading outdoors experts conducted more than 200 educational seminars and demonstrations on a variety of topics including hunting, fishing, trapping, self-defense tactics, and wild game cooking.”
First-Hand Detailed Report of GAOS on American Hunter
Want to know what it’s really like to visit the Great American Outdoor Show? David Herman posted a detailed 1360-word report on the American Hunter website. With many photos and a full event time-line, this report covers all aspects of the event — from new gun displays, to hunting seminars, to a meat butchering and cooking exhibition. CLICK HERE to read full story on AmericanHunter.org.
“Overwhelmed. This was the first word that came to mind as I trundled down the long hallway connecting the Shooting Sports Exhibit Hall to the rest of the sprawling show. Before grabbing a map, I had foolishly thought the Shooting Sports hall was all there was; I had never been more wrong. There were still eight halls to go, not counting arenas and packed hallways. As I wound my way through the labyrinthine tangle of vendors, outfitters, boats, campers, spreadable bacon, and everything in between, the constant appearance of friendly faces … beckoned ever deeper into the event, until eventually I understood exactly what makes this place an outdoorsman’s Mecca year after year.” — David Herman
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Palmetto SA — S&W M&P 9mm Shield Bundle, $374.99
⏺ Great value Bundle PLUS $75 S&W Factory Rebate
S&W makes some great firearms and one of their best values is the M&P 9mm M2.0 pistol. With this multi-item BUNDLE you get the M&P Shield M2.0 9mm plus a cleaning kit, range bag, and tactical knife — all for $374.99. On top of that, S&W offers a $75 Rebate on this pistol. That lowers your net cost to just $299.99!
⏺ Great spotting scope for the price with rock-solid warranty
Having a quality spotting scope can help when in the field, at matches, or just having fun at the range. We found a great deal on the Vortex Diamondback 20-60x60mm spotting scope, now just $249.99 at MidwayUSA. This spotting scope has good light transmission throughout the magnification range. Sharpness is good, and the spotting scope’s construction stands up to rough use in the field. This spotter is protected by Vortex’s VIP Unlimited Lifetime Warranty. If you need a bigger objective, MidwayUSA also has the 20-60x80mm version for $324.99.
3. Brownell’s — LEE Breechlock Kit, $157.50 with Discount Code
⏺ Get a complete reloading kit for less than the cost of a single-stage press
Would you like to grab a complete reloading setup for under $200? Brownells offers the Lee Breechlock Press Package for a low $174.99 price. But it gets better — enter Brownells 10% Off codes TA10 or WLS10 at checkout to bring the price down to a crazy low $157.50 (before tax/shipping). This is a great deal on a complete reloading package with all the essentials — Press, Powder Measure, Scale, Priming Tool, Chamfer Tool, Shellholders, and more.
4. Amazon — HQA TSA-Approved Rifle Case, $109.99
⏺ Very rugged, full-featured TSA-approved roller case
Whether flying or just transporting your rifles to the range it’s important to protect them with a rugged, quality gun case. The solidly-built HQ ISSUE 41″ Tactical Rifle Case meets all the TSA requirements and can withstand tough treatment. Offered in two colors — Flat Dark Earth and Gray — this case has rollers to ease movement through the airport. Handy pick-n-pluck foam allows a secure custom fit for your firearms. NOTE: This case is 41″ overall so it will NOT fit long-barrel competition rifles unless the action is separated from the stock/chassis. For larger rifles, one good option is the Eylar 53″ Protective Roller Rifle Hard Case priced at $199.99.
5. Graf’s — Frankford Arsenal Trimmer, $69.99
⏺ Adjustable collet for all case sizes — strong user reviews
The nicely-crafted Frankford Arsenal Universal Precision Trimmer is a versatile tool that can work with most popular cartridge types. This case-trimming system indexes on case shoulders for precise trimming every time. The adjustable collet system works with shouldered cases from .17 Remington to .460 Weatherby and fits just about any drill or drill press.
6. Graf’s — Federal .22 LR Hi-Vel ammo, 525 Rounds $36.99
⏺ Quality USA-made ammo, just $0.07 (seven cents) per round
With the high cost of primers, powder, and bullets these days, more gun guys/gals are shooting rimfire rifles. If you need good .22 LR ammo at a very attractive price, check out Federal .22 LR Hi-Vel ammo at Graf’s. Get a bulk pack with 525 rounds for just $36.99. That works out to $3.52 for 50 rounds — a great price for good-quality major USA brand ammo.
7. Natchez — Pistol and Rifle Magazines on Sale
⏺ Huge selection of pistol and rifle magazines deeply discounted
Have you been waiting for the right time to pick up more magazines for your favorite pistol or rifle? Right now Natchez is running a big Multi-Brand Magazine SALE. You’ll find mags for Glock, Ruger, SIG Sauer, Smith & Wesson, Taurus, and Kimber at big savings. For example, a Glock G17 Gen5 17rd magazine is just $19.99. That’s 17% off the regular $23.99 price.
8. Amazon — RCBS Automatic Priming Tool, $115.99
⏺ Popular and efficient bench-top priming unit
If you’re looking to prime your cases fast and consistently then check out the RCBS Auto Priming Tool. This tool mounts securely to a bench top. It is simple to use but reliable and very consistent thanks to its single-stage lever system. You can load up to 100 primers in the two provided vertical primer-holder tubes. This system is very efficient — you can insert a case and prime it in just a few seconds. Here are verified owner comments: “Fast with very consistent sitting depth”; “Works fantastic, netting me over 500 cases an hour easily — my hand-priming days are over”; “Loading the primers into the feeding tube is easier than handling individual primers [with] traditional tools.”
9. Amazon — Hunpal Compact Tripod, $19.99
⏺ Handy tripod for hunters and varminters — low-cost and compact
For plinking fun days or a varmint trip, sometimes a simple, small-format front rest may be all you need. This HUNTPAL Portable Tripod offers versatility, low cost, and a compact footprint. With aluminum construction, non-slip rubber feet, and the ability to work as either a tripod or monopod, this HUNTPAL unit can be helpful for varminters and hunters in the field. It can also work as a front rest for sighting in a hunting rig.
“Second Amendment? — We don’t give a damn.” That could be the mantra of many Democratic Party members of Congress. Now a radical anti-gunner from New Jersey has introduced new Federal legislation, H.R. 584, that would prevent all Americans from purchasing ANY quantity of ammunition online. All ammo sales would have to be in person with photo ID.
Congresswoman Bonnie Watson Coleman (D-NJ) (“Watson Coleman”) has revived legislation that would prohibit the sale of ammunition online. Last month, Watson Coleman introduced the Stop Online Ammunition Sales Act of 2023, a new version of restrictive legislation she authored in the past. The bill has been listed as H.R. 584 and referred to the House Committee on the Judiciary. As of February 24, 2023, H.R. 584 had 23 co-sponsors*, all woke Democrats, including the radical Rashida Tlaib, noted for her calls to defund the police (which shows how little she actually cares about reducing crime).
This unconstitutional bill, according to the NRA-ILA, would implement all of the following:
1. FORCE purchasers to submit a photo ID in person every time one buys ANY ammunition.
2. REPORT the identity of ammo purchasers to the U.S. Attorney General if the ammo buyers purchase more than 1,000 rounds within a 5-day period.
3. REGISTER ammunition buyers in a database maintained by the U.S. Department of Justice.
You know what the DOJ would do with the database of ammo buyers. It would be used to identify gun owners, creating a de facto registry of gun owners. That’s in direct violation of Federal law which forbids such a registry.
Guns.com reports: “The proposal [H.R. 584] would establish the licensing of ammunition dealers who then would be required to confirm the identity of customers seeking to purchase ammo by verifying a valid photo I.D. in person. As such, it would place a prohibition on the current widespread practice of buying ammo online and having it shipped directly to the customer’s door. The measure would also require these vendors to report all purchases of more than 1,000 rounds within a five-day period by the same person to the U.S. Attorney General as well as local and state law enforcement.”
Effects If ‘Stop Online Ammunition Sales Act’ Becomes Law
From a practical standpoint, this legislation would make ammunition much more difficult to buy in large quantities. And specialized ammo, for less popular chamberings, could be almost impossible to get, if people could only shop at local retail outlets. Being able to shop a dozen or more online vendors allows shooting enthusiasts to get a wide variety of ammo types at competitive prices. For example, with AmmoSeek.com, you can see the best rimfire and centerfire ammo deals from dozens of vendors.
Watson Coleman and her anti-Second Amendment co-sponsors want to make it MUCH more difficult to obtain ammunition, and she would be delighted if the cost of ammo doubled or even tripled. She hates firearms and hates gun owners.
Regarding H.R. 584, GunsAmerica contacted Alan Gottlieb, founder of the Second Amendment Foundation. Gottlieb was critical of the one-sidedness of legislation in that it presupposes all ammunition sold online ends up in the hands of criminals. Gottlieb noted: “Day in and day out men and women save their lives with ammunition they have bought online and the only response from Democrats is to call for bans on the sale of ammunition.”
Additional cosponsors of the bill include:
Jake Auchincloss [D-MA-4]
Joyce Beatty [D-OH-3]
Earl Blumenauer [D-OR-3]
Andre Carson [D-IN-7]
Joe Courtney [D-CT-2]
Jason Crow [D-CO-6]
Danny Davis [D-IL-7]
Madeleine Dean [D-PA-4]
Diana DeGette [D-CO-1]
Susan DelBene [D-WA-1]
Mark DeSaulnier [D-CA-10]
Glenn Ivey [D-MD-4]
Sydney Kamlager-Dove [D-CA-37]
Barbara Lee [D-CA-12]
Zoe Lofgren, Zoe [D-CA-18]
Betty McCollum [D-MN-4]
Kweisi Mfume [D-MD-7]
Seth Moulton, Seth [D-MA-6]
Eleanor Holmes Norton [D-DC-At Large]
Donald M. Payne, Jr. [D-NJ-10]
Mike Quigley [D-IL-5]
Rashida Tlaib [D-MI-12]
Jill Tokuda [D-HI-2]
We’re having a wicked winter in some parts of the nation. California is experiencing blizzards and snow-bound highway closures. In the middle of the nation, major snowstorms hit many states, and 470,000 customers lost electrical power after an ice storm in Michigan.
Rifle Transformed from Ordinary Varmint Rig to a Stunning F-TR Machine
As an antidote to these weather-related worries, for this Sunday GunDay we’re offering a bit of beauty amidst snow — a handsome rifle showcased in a white winter wonderland. This handsome rifle started life as a rather ordinary .204 Ruger Rem VSSF varmint rig. With a new barrel, a new stock, and a stunning flame-pattern hydro-dip coating, this is now an ultra-accurate .223 Rem F-TR competition rifle.
Flames in the Snow…
Forum Member Brandon Schlund (aka “Bois Blanc Boy”), photographed this handsome flame-themed F-TR rifle against the snowy background of Michigan’s Bois Blanc Island. Brandon posted this to our long-running Pride and Joy Rifle Forum thread. He notes: “This is my first F-TR build, which started out as a stock Remington .204 Ruger. I had the action blue-printed, firing pin was bushed by Speedy, and I had a new bolt handle and knob installed by John Pierce.” This rifle is now fitted with a 3-groove Pac-Nor 1:6.5″-twist barrel chambered in .223 Remington to shoot the 90gr Bergers. Other components are: Kelbly KTS stock, Phoenix bipod, and Sightron 8-32x56mm SIII scope. Brandon says: “It took a long time to get this gun where it is now but I’m truly happy with it!” Here’s the “before” photo:
The Transformation — F-TR Comp Rig Made from Rem .204 Ruger Varminter Report by Brandon Schlund
This rifle started out as a “plain Jane”, factory Remington VSSF II. I shot it on varmint hunts in factory configuration. Then I decided to transform the rifle into a .223 Rem F-TR gun. As the .204 has the same bolt face as a .223 made sense to go in that direction since I would be able to use the gun for varmint hunting as well as F-TR.
While I had shot some F-Class matches with my dad (Joe Schlund aka Bench on AccurateShooter) it wasnt much. When we did a PD hunt in Wyoming I primarily shot my .204 but I decided I wanted a cartridge that could reach out a little further and also do double duty — competition and varminting.
The first step in transforming this rifle was selecting a barrel. We ordered a Pac-Nor, 1:6.5″-twist, 3 groove, 30.5″ heavy Palma contour. This was then chambered with a PTG .223 ISSF reamer with 0.169″ freebore to run the .224 caliber heavies. I went with Pac-Nor because both my father and my brother Mark (aka Labrador2 on AccurateShooter) owned Kelbly-built F-TR rifles with the same barrels. Mark and my father couldn’t be happier with the results. Pac-Nor has great customer service along with a short wait time.
I sent the barrel and the factory Remington 700 action down to Kelbly’s where they did the chambering and cut the threads. While Kelbly’s had my action I had them blueprint it. A Kelbly KTS stock with the three-way buttplate and adjustable cheek piece came next. After getting behind Dad’s rifle and Mark’s gun there was no reason to look any further. With all its adjustments, the KTS stock fits very comfortably.
Loading for the .223 Rem with H4895 and 90gr Bergers
As a .223 Rem, this rifle has proven very accurate — it’s a bullet-hole cutter at 100 yards (low twos easy). Our best load is with Hodgdon H4895, 90gr Berger VLDs, CCI BR4 primers. This load is running at about 2835 FPS but YMMV (remember this is a LONG 30.5″ barrel). The Bergers are loaded .008″ into the lands with base-to-ogive of 2.035″.
Our loading technique may be tedious — with lots of sorting and measuring. But brother Mark, father Joe, and I all enjoy the steps. Our three .223 Rem match guns all love the same load which makes loading much easier. Believe it or not we use a Hornady Lock-N-Load progressive ammo plant, which is great when loading for three guns. Our consistency is fantastic with run-out a mere .001-.0015.
We also turn necks and weigh our primers. Does neck-turning and primer weighing really make a difference? Who knows but we try to eliminate more variables since we have to the time to do it, and we actually enjoy the procedures.
Pierce Engineering Installed Action and Modified Bolt
Being from Michigan, Pierce Engineering has done a lot of work for my family’s guns. For this project the Pierce team bedded the action and glued in a single-shot follower. The stock bolt handle/knob was too short for comfort in the KTS stock. Pierce added a longer handle and tactical knob to the bolt. I then installed a .223 Rem Lapua case base into the knob.
The complete .223 Rem rifle ready to shoot F-TR, as fitted with 8-32X56mm Sightron and Phoenix Bipod, weighs 17 pounds, 15 ounces.
Flame Graphics by Camo Creek Hydrographics
After the action was bedded by Pierce, the stock was sent to Camo Creek Hydrographics in Fenton, Michigan. I selected a flame-style design which Camo Creek applied through hydro-dipping. The stock went back to Pierce’s shop, which applied three coats of clear over the entire stock. The clear-coating really enhanced the flame graphics.
Firing Pin Bushed by Speedy
I sent the bolt to Thomas “Speedy” Gonzalez to have the firing pin hole bushed as otherwise the load could crater the primers pretty bad. Knowing I’d be shooting heavy-weight .22-Cal bullets with a stout load this was a good idea. Speedy also cut his trademark grooves into the bolt shroud which looks amazing. His work is top notch! There is zero cratering now, even with the hottest of loads.
Competition Components — 8-32x56mm Sightron and Phoenix Bipod
For an F-TR rig you need a quality high-magnification optic and a premium, wide-base bipod. I installed a 8-32x56mm SIII Sightron. This was another easy choice because of the attractive price and because my family has four other Sightrons that work great.
I installed a fore-end Picatinny rail to attach a Phoenix Bipod. I extended the Mariners wheel handles by adding short sections from an aluminum arrow shaft. This lets me adjust elevation without stretching forward. I also installed a Calvin Elite Timney Trigger set at 6 ounces.
$2500.00 Invested in Rifle Transformation and Upgrade
How much did this all cost? Brandon tells us “I have roughly $2500 into the rebuild of the gun from a .204 Ruger to the .223 Rem.”
Bois Blanc Island in Michigan
Here on Bois Blanc Island we don’t have many amenities, but we do have the ability to shoot 550 yards at our local gravel pit on state land. It’s snow-bound right now as you can see. But later in the year this will be our close-to-home training center.
Winter at Bois Blanc Island, Michigan — Here’s the gravel pit where we can load test during warmer weather. When I took this photo, it was a “balmy” 10-degree day.
NOTE: This is an older article, but with the SW Nationals taking place last week, we thought our readers might enjoy a repeat view of a very rare and unique F-Class rig. This hybrid wood and aluminum stock is a “one-of-kind” custom, crafted by Sebastian (“Seb”) Lambang, creator of the SEB Coaxial Rests and Coaxial Joystick Bipod.
Back in 2013, our friend Sebastian (“Seb”) Lambang engineered an impressive wood and aluminum F-Class stock. The stock features a long, box-section aluminum fore-end with a wood rear section and wood-trimmed “wings” on the front bag-rider. The aluminum fore-arm has “buick vents” for weight reduction. From the end of the action rearward, the stock is mostly wood, with light and dark fancy wood laminates on opposite sides (left and right).
The foot of the buttstock has a very wide aluminum rear bag-rider with rails. The rear wood section appears to be two solid pieces of wood — but that is deceiving. Seb explains: “To save weight, the buttstock is hollow (using thin-walled wood)”. To strengthen the construction, Seb added carbon fiber inside the buttstock. So what you see is a wood outer shell with carbon fiber layers on the inside. The stock sports vertically-adjustable cheek-piece and buttplate. The thick, rubber buttpad should diminish felt recoil even when shooting big cartridges with heavy bullets.
This is an interesting, innovative stock design. And as with everything Seb produces, the craftsmanship, fit and finish are superb.
To go with this gun, Seb also crafted a handsome set of angled scope rails with beautifully-machined scope rings. Imagine being able to custom-make one-off products of this quality in your own machine shop!
Brownells is a well-known retailer of guns, gun parts, tools, accessories, ammo, and pretty much everything gun-related. What you may not know is that Brownells has a very active video production department that releases new “how-to” and product information videos every week. These videos offer helpful advice on gun cleaning/maintenance, reloading, as well as selecting/assembling components for various kinds of rifles. And every week Brownells serves up a new products video. There now over 1000 videos on the Brownells YouTube Channel, which is truly a remarkable resource.
Here are six of our favorite videos from Brownells. There’s a helpful guide to scope installation, AR owners will find some good advice on spare parts, new reloaders can learn how to use the OAL tool, and all gun owners should watch the video on ammunition storage.
Scope-Mounting — Common Mistakes to Avoid
Always be careful when mounting a rifle scope. This isn’t a super-complex or highly technical task, but there are ways you can mess it up. This video explains common pitfalls to avoid when mounting a scope.
1. Make sure the rings don’t touch ANY part of the turret housing, objective bell, or eyepiece.
2. Be certain the scope rings are tightly clamped to the scope base. Grasp the scope with one hand and the rifle with the other, then ensure there is no play.
3. Make sure there’s clearance between the objective bell and the rifle. No part of the scope should touch the rifle itself.
4. NEVER over-tighten the scope rings. You can actually crush the scope tube and damage the optic beyond repair. Stick to the torque specs!
How to Use Hornady OAL Tool and Hornady Bullet Comparator
Gun Tech Steve Ostrem explains how to properly use Hornady’s Overall Length Gauge to determine length-to-land precisely. The OAL Gauge uses a “Modified Case” that threads onto the tool and holds a bullet. Push on the back of the gauge until you feel the bullet just touch the rifling. (We do this gently at first, tapping the rod a couple time to ensure the bullet is aligned correctly). Once you’ve got the length, then use the tool with a comparator on your calipers to get the length-to-lands. NOTE: We recommend taking the measurement 3-4 times in a row to get a reliable number. With a little practice your should be able to get repeatable measurements within .0015″.
Air Travel with Firearms — Key Regulations You Must Follow
You can travel on commercial airlines with firearms. But you must follow the TSA regulations, and your particular airline’s rules. First, make sure your guns are UNLOADED before your leave home. Guns need to be carried in proper hard-sided cases that cannot be pried open. Be prepared to unlock the case if the TSA wants to inspect what’s inside. TSA agents can cut the locks if they need to open the case but can’t locate you. If you use special TSA-approved locks, TSA agents have master keys that let them open the case without destroying your locks. You CAN transport up to 11 pounds of ammunition — with restrictions explained in the video.
How to Store Ammunition Safely and Securely
This has been one of the most popular Brownells videos — with over 1.7 million views. Here’s the deal — ammunition WILL keep for a long time if you store it properly. DO store ammunition in a cool, dry place that doesn’t have wide temperature swings. Temperature cycling will also degrade primers and powder. Put it in airtight ammo cans to keep out the moisture. Tupperware containers will work too. Brownells also recommends putting moisture-absorbing silica packs in your ammo containers. DON’T just keep ammo in factory cardboard factory boxes stacked in the basement, attic, or garage (especially on the floor). Factory ammo boxes can absorb moisture which can degrade primers and corrode the brass cases. Yes, sealed military ammo will usually handle this kind of storage for quite a while, but it’s still not wise.
Must-Have Spare Parts for AR-Platform Rifles
In this video, two knowledgeable gun techs answer the question: “What spare parts should I keep on hand for my AR-15?” On the list are: Gas Rings, Buffer Spring, Extractor Spring and Pin. NOTE: You may want to try the one-piece spiral gas ring rather than the standard rings which require alignment. The cotter pin and cam pin can also easily get lost when the Bolt Carrier Group is disassembled for cleaning. On the lower receiver you’ll want spare springs and detents for the pivot/takedown pins. If you’re using lighter-power springs, keep standard-power spares on hand. If your rifle stops working, swap in the factory-spec springs to find out if the problem is the gun or your ammo. Also, if you have upgraded your trigger, always keep the original trigger as a backup.
Cleaning Advice for .22 LR Rimfire Rifles
Gun Techs Steve Ostrem and Caleb Savant debunk some myths about cleaning .22 LR barrels. One myth is that cleaning will harm the accuracy of a .22 LR barrel. Caleb thinks this myth is the result of people cleaning a barrel from the muzzle and damaging the muzzle crown, which CAN diminish accuracy. If it’s done right, cleaning won’t damage the bore. However, you certainly do NOT have to clean your 22 LR’s bore every time you go to the range. But DO clean the action every time you shoot the rifle, especially on a semi-auto. What about shooting a lot of lead bullets? Won’t that lead up the bore? The guys give us the straight skinny on lead fouling, too. When you see your .22 LR rifle’s groups opening up, you may want to consider cleaning.
This article is Copyright 2023 AccurateShooter.com. Reproduction on any other website gives rise to monetary damages.
The 2023 NRA Annual Meetings & Exhibits will take place at the Indiana Convention Center on April 14-16, 2023 in Indianapolis, Indiana. The Exhibit Hall is open all three days and will showcase over 14 acres of guns and gear from hundreds of manufacturers and retailers.
A bigger-than-ever Exhibit Hall will host approximately 800 exhibitors, events, receptions and demonstrations. Attendees can see the latest guns, knives, optics, ammo and accessories available on the market today. Organized events include the NRA Foundation Banquet and Auction, the NRA-ILA Leadership Forum, plus multiple seminars. There will be appearances from notable celebrities, and a major Saturday concert with leading musical artists.
At this 152nd Annual NRA Convention you can also book the hunt of a lifetime, purchase shooting and hunting accessories, view impressive gun collections, and hear influential, pro-2A experts.
The big event is just six weeks away. If you plan to attend the 152nd NRA Annual Meetings & Exhibits we recommend you register soon and get your hotel booked well ahead of time. With the current policies coming from the White House, there has been no more important time to support gun rights and the Second Amendment.
Flame Graphics by Camo Creek Hydrographics
