The 2016 IWA Outdoor Classics trade show (aka “Euro SHOT Show”) is now history. The IWA event increases in popularity each year. In 2016 there were 1457 exhibitors with nearly 5000 products on display. The final 2016 attendance count is not complete but there were probably close to 44,000 visitors at the IWA show in Nuremberg, Germany. Last year, in 2015, there were 41,748 trade visitors from 122 countries. The video below shows highlights of the 2015 IWA Outdoor Classic event:
IWA Outdoor Classics 2016 Wrap-Up Video
Many interesting new products were showcased at IWA this year. Here are some of the more innovative or noteworthy guns and shooting accessories on display in Nuremberg:
Anschutz 54.30 Smallbore Action and Rifle
The new Anschutz 54.30 smallbore target barreled action features a threaded receiver and barrel — a change from the past (when barrels were pressed and pinned). The new 54.30 action has many other important design improvements. The loading port was moved 30mm rewards and was reduced in size by 18%, resulting in a more rigid receiver. The closer location of the loading port is more ergonomic, allowing less movement when in position. The weight of the firing pin was reduced, resulting in a velocity increase of the firing pin and a shorter lock-time. Anschutz also claims that a newly-designed barrel chamber improves overall accuracy. The new 54.30 match action can be installed into all available stocks which fit Anschutz round match actions such as the 1907 or 1913.
Dentler Basis Vario — Modular Rifle Scope Mounting System
Dentler has introduced an interesting modular scope mounting system that allows you to quickly switch optics while retaining zero. The system offers many variations for scope height, optic type, and fore-aft position. Dentler claims this system offers 100% repeatable zeroes. Watch the video to see how the BASIS VARIO mounting system works.
CK Technology — Granular Rubber Bullet Trap
This is a smart use of recycled rubber materials. CK Technology of Belgium has created a new bullet trap that uses small rubber beads to capture bullets. The granular bullet trap is made of rubber granulates placed on an inclined galvanized steel plate. It offers many advantages compared to traditional steel bullet traps– most importantly there is less pollution, reduced noise, and most importantly, bullets are captured intact so there are no ricochets. This system works for up to .50 caliber bullets, and can be installed indoors or outdoors. The CK bullet trap takes up less space than a conventional steel bullet trap — an advantage for indoor ranges.
SIUS AG — Color Touch-Screen Electronic Scoring Display
SIUS AG is a leader in electronic scoring technology, and the new SA951 control/display unit represents the state of the art. The latest generation SA951 is designed for all types of pistols and rifles, centerfire, rimfire, and airguns. SIUS states the the SA951 is currently the only unit with ISSF Phase III approval for all types of firearms and airguns. The SA951 features a sharp 10.5-inch color touchscreen that permits the competitor to see his/her targets and easily navigate a variety of functions — all with the touch of a finger. Using the control menu and selecting programms and screens is easy, quick and intuitive. The control unit can also be operated via the remote control or the proven barcode scanner. This allows users the same kind of operation as with predecessor models SA931/SA941.
Korth Super Sport Revolver
This is one serious wheelgun. The new Korth Super Sport Revolver is big and beefy with Picatinny-type rails on top and on both sides of the barrel. Chambered for .357 Magnum, this gun was designed for used in action matches such as the Bianchi Cup. Weighing a hefty 3.64 pounds (1.652 kg), the Korth Super Sport is over 11 inches long, without compensator. This gun has many innovative features, including: externally adjustable hammer spring, externally adjustable double-action cycle (with pressure point wheel), adjustable iron sights, and quick-change cylinder (for caliber change to .38 Special or 9mm Para). Here’s video of the gun being shot at the SHOT Show Media Day event in January.
Svensk Jaktvision PhoneCam Holder
Svensk Jaktvision of Sweden offers a handy product that mounts a smartphone above your rifle-scope. This product is designed for hunters who want to record their experience in the wild. But the system is also useful for marksmanship training. The top-mounted smartphone screen allows a coach/instructor to see how the rifle moves in the hands of the trainee. Watch the video to see how the Jaktvision PhoneCam holder can be employed in the field.
We recently showed a video of an incident at a pistol match that easily could have resulted in the death of a range worker. If you watched that video, you’ll understand that one momentary oversight is all it takes to put someone in the hospital (or the morgue). That’s why shooters should be prepared for the worst. Get first-aid training, and carry a basic first-aid kit whenever you go to the range.
Carry a Basic First-Aid Kit Shinnosuke Tanaka, reporter for RECOIL Magazine, offers some good advice: “OK, most of us have seen the [pistol match incident] video. YES, it is RSO’s fault not checking down range enough. BUT it’s your bullet that could hurt someone when it happen. So don’t let someone take care of safety for you, look around one more time after the command ‘Make ready’.”
Four basic firearms safety rules always apply. The Fourth Rule is: “Always be sure of your target and what is beyond it”. Shinnosuke adds: “My own fifth rule is ‘If there is doubt, don’t pull the trigger’.”
Shinnosuke cautions: “If you play with firearms you should know how to deal with gunshot wounds… Carry a simple medical kit. Here is my first aid kid, always carried on top of my shooting pack. Seek professional training and know how to use it. It’s your responsibility to stop the loss of your blood when an accident happens.”
Watch Gun Shot First Aid Video
If someone at a range is seriously injured by a gunshot, you should immediately summon emergency medical professionals. In addition, basic first aid can help stabilize the injured individual. This 55-minute video explains Basic First Aid for Gunshot Wounds:
At the IWA Trade Show in Germany a few years ago, a correspondent for The Firearm Blog interviewed Woody Woodall, who runs Lothar Walther’s USA operation. While many shooters assume that Walther hammer-forges most of its barrels like some other European barrel-makers, in fact Lothar Walther USA uses the button rifling technique for most of its US-made barrels.
In the video below, created for The Firearm Blog, Woodall explains that button rifling involves some extra steps to ensure a good result: “The extra work that goes into it is that you’ve got to make rifling, stress relieve it, and have it come out the right size. And it takes a lot of skill to do that. Lothar Walther invented button rifling in 1925, if a better way of making rifling came out, we’d be glad to go to it.”
Woodall explains that hammer forging is a good method for mass production, but it is costly to set up: “Hammer forging is relatively new, it came out in 1934, but did not come into prominence until the 1950s…. But the cost of [hammer forging] in the world today is getting above what the market will bear for barrels. [Hammer forging] is more complicated. As the hammers hit the barrel the barrel gets longer, but the hammers have to hit uniformly so the barrel [stays] straight. There’s a higher failure rate in that. There’s also some surface delamination that can occur, and some other issues. So if you’re hammer forging, you really have to pay attention to the details. So, it’s like button rifling, only ten times more complicated. It’s for super-high-volume production… The large companies tend to use the hammer forging, intermediate size companies tend to use the buttoning, and craft companies tend to use the cut rifling. All three [methods] can make an equally accurate barrel.”
We often get questions about the 6.5 Creedmoor Cartridge — folks ask where they can find good resources for this cartridge, which is popular with Across-The-Course, High Power, and tactical shooters. We did some searching and found that the August 2011 digital edition of Shooting Sports USA has a good article for all fans of the 6.5 Creedmoor.
Development of the 6.5 Creedmoor Cartridge
In the August 2011 Edition of Shooting Sports USA you’ll find a lengthy feature on the 6.5 Creedmoor cartridge. This story covers the origin of the cartridge and its performance both as a match cartridge and as a hunting round. Hornady Chief Ballistician Dave Emary explained: “the original intent of the cartridge was as an across-the-course match cartridge. We envisioned it as an off-the-shelf round that would produced the accuracy and ballistics to compete in all match disciplines right out of the box. At the same time we realized that the same characteristics would make an exceptional hunting cartridge with the right bullets.”
6.5 Creedmoor Brass No Longer Washed After Annealing
Here’s an interesting update on Hornady 6.5 Creedmoor brass and loaded ammo. In a move to improve case quality and neck uniformity, Hornady recently changed the 6.5 Creedmoor production process, eliminating the case-washing step after annealing. So now you will see annealing coloration on 6.5 Creedmoor brass, just like on Lapua brass. Dennis DeMille of Creedmoor Sports wanted to improve the consistency/uniformity of 6.5 Creedmoor case-necks. At Dennis’ suggestion, Hornady conducted tests which showed that the “standard industry practice” of washing brass could potentially alter the necks in undesirable ways. Bottom line, unwashed annealed brass was determined to have an accuracy edge over washed brass. Looking at these results, Hornady decided to forgo the post-anneal washing process. As a result, the latest 6.5 Creedmoor brass now displays the distinctive coloration left by neck/shoulder annealing. Learn something new every day, eh?
How well can factory .308 Win ammo perform? Amazingly well it seems. Our friends at Criterion Barrels recently tested some .308 ammo from Creedmoor Sports. This was loaded with Lapua’s 175gr Scenar HPBT bullet. The results speak for themselves. Any time factory ammo can shoot inside quarter-MOA, that’s impressive. This ammo was used in a “Rem/Age” project rifle. That term refers to a Remington action rifle that has been re-barreled with a pre-fit Criterion barrel. The new barrel is secured with a Savage-style barrel nut. Hence the term “Rem/Age” or “Rem-Age”.
Criterion posted: “I think we may have a new favorite factory match load for the nitrided Rem/Age build.” Another reader added: “[Creedmoor’s] 175 Scenar .308 ammunition is top notch.” FYI, this group was shot on our load development target, which you can download for free from our Targets Page.
Why do Criterion barrels shoot so well? One reason is that Criterion’s barrel steel is carefully stress-relieved. In the photo below, Criterion Rack 1A (aka the “Coffin”) has been loaded with barrel blanks — made ready for the stress-relieving process.
The National Shooting Sports Foundation (NSSF) has launched a health plan for employers and employees in the gun industry. The new Firearms Industry Health Advantage plan allows businesses to upgrade their in-place employee benefits with a low-cost, non-traditional benefit program. Designed to save both time and money when non-life-threatening minor illnesses and injuries occur, the Health Advantage utilizes board-certified doctors to diagnose and treat patients 24/7 via telephone or the live-chat features on computers, tablets and other smart devices. This can help beneficiaries get treatment faster, with fewer hassles and delays.
Firearm Industry Health Advantage Plan
This plan saves employees time and money with 24/7 access to a doctor by phone or online video consult. Smarter Benefits for Smarter Living:
— On demand healthcare – whenever, wherever in the United States.
— U.S. board-certified doctors with an average 15 years practice experience.
— Get diagnosis, treatment options and prescription if necessary.
— Consultations for all ages – from children to seniors.
— 24/7 access by phone or online video consult.
— 16 minutes average call back time.
Estimating Actual Cost per Round by Caliber
This article comes from the USAMU, which provide shooting and reloading tips on its Facebook Page. This week’s USAMU TECH TIP outlines a ballpark-estimate method of calculating the actual cost per round of different calibers. Some applications, and some shooters, by virtue of their high level of competition, require the very best ballistic performance available — “Darn the cost, full speed ahead!
If you are in serious contention to win a major competition, then losing even a single point to inferior ballistic performance could cost you a national title or record. However, this “horsepower” does come at a cost! Some calibers are barrel-burners, and some offer much longer barrel life. Look at this comparison chart:
Estimated Cost Per Round by Cartridge Type
Below are some estimated total expense per round (practice and competition) based on component costs, type used, expected barrel life and a standard, chambered barrel cost of $520.00 across calibers.
5.56x45mm: $0.46/round (barrel life 6,000 rounds)*
6mmBR: $0.81/round (barrel life 2800 rounds)
6XC: $0.97/round (barrel life 2200 rounds)
.308 Win: $0.80/round (barrel life 4500 rounds)
6.5-284: $1.24/round (barrel life 1100 rounds)
*Note the high round count estimate for 5.56x45mm. This is a bit deceptive, as it assumes a period of “lesser accuracy” use. The USAMU says: “Much of the difference you see here between 5.56 and .308 is due to using the 5.56 barrel for 100-200 yard training with less-expensive, 55gr Varmint bullets after its long-range utility is spent”.
Moreover, while some applications require specialized, high-cost components, others do not. And, if the shooter is still relatively new to the sport and hasn’t refined his skill to within the top few percentile of marksmen, a more economical caliber choice can help stretch a limited budget. Translation: More skill per dollar!
In this post, the prices for all items mentioned here were taken from a major component supplier’s current advertisements, and all brass was of top quality, except in the case of 5.56mm. There, 200 top-quality, imported cases were reserved for 600-yard shooting, and the other brass used was once-fired Lake City surplus.
Cartridge cases were assumed to be loaded 10 times each. [Your mileage may vary…] Bullet prices assumed the use of less-expensive, but good-quality match bullets for the bulk of shooting as appropriate.
The cost of top-tier, highly-expensive match bullets was also calculated for a realistic percentage of the shots fired, based on ones’ application. Barrel life by caliber was taken from likely estimates based on experience and good barrel maintenance.
Brass Costs Based on 10 Loads Per Case
Often, handloaders may calculate ammunition cost per round by adding the individual costs of primers, powder charges and projectiles. Many don’t consider the cost of brass, as it is reloaded several times. Here, we’ll consider the cost of enough top-quality brass to wear out a barrel in our given caliber, at 10 loads per case, except as noted above.
Don’t Forget Amortized Barrel Costs
Few shooters factor in the full, true cost of barrel life. Depending on caliber, that can dramatically increase the cost per round. For example, consider a long-range rifle in 6.5/284 caliber. This cartridge performs amazingly well, but at a cost. Ballpark estimated barrel life [in a top-quality barrel] is 1100 rounds. Some wear out faster, some last longer, but this gives a rough idea of what to expect.
Accurate barrels are a joy to use, but they are an expendable resource!
A top-quality barrel plus installation was estimated at about $520.00. At 1100 rounds, barrel life adds $0.47 per round to our total cost. Thus, what had started out as an [components-only estimate, with brass cost] of $0.76/round now totals $1.24 per shot!
Cost Considerations When Choosing a Catridge Type
Some shooters might ask themselves if they could meet their present needs with a more economical caliber. If so, that equates to more practice and matches per available dollar, and more potential skill increase on the available budget.
Each shooter knows his skill level, practice needs, and shooting discipline’s requirements. Some might shoot NRA Service Rifle or Match Rifle using a 5.56mm with a long barrel life. Others might be Match Rifle shooters faced with choosing between, say, a 6mm BR vs. 6XC. A realistic assessment of ones needs, performance-wise, may help guide the shooter toward a caliber that’s most optimized to their needs at the moment.
Admittedly, the factors affecting cost for any individuals circumstances can vary significantly. However, hopefully this will provide one useful method of evaluating one’s training and competition choices, based on their skill, goals and needs.
Before he retired, Forum member Ron D. served as a Police Officer assigned to Chicago’s O’Hare airport. Ron offers some excellent advice for shooters traveling with firearms and expensive optics.
First, Ron explains that airport thieves can spot bags containing firearms no matter how they are packaged: “Don’t think you’re safe if your guns are placed in cases designed for golf clubs or trade show items. Baggage is X-Rayed now and cases are tagged with a special bar code if they contain firearms. It doesn’t take long for bad guys to figure out the bar coding for firearms.”
Carry-On Your Scopes and Expensive Items
Ron advises travelers to avoid placing very expensive items in checked baggage: “When traveling by air, carry on your rangefinder, spotting scope, rifle scope, medications, camera, etc. You would be surprised at the amount of people that carry-on jeans and shirts, but put expensive items in checked baggage. Better to loose three pairs of jeans than some expensive glass.”
Mark Bags to Avoid Confusion
Ron notes that carry-on bags are often lost because so many carry-on cases look the same. Ron reports: “People do accidentally remove the wrong bag repeatedly. I frequently heard the comment, ‘But it looks just like my bag.’ When de-planing, keep an eye on what comes out of the overhead that your bag is in. It’s easy to get distracted by someone that has been sitting next to you the whole flight. I tie two streamers of red surveyors’ tape on my carry-on bag.” You can also use paint or decals to make your carry-on bag more distinctive.
Choosing a Rifle Transport Case
Ron advises: “Buy the best [rifle case] that you can afford. Don’t cry when your $3,000+ Benchrest rifle has a cracked stock or broken scope. Think about what it would be like to travel across the country (e.g. to Montana or the Cactus Classic) and arrive with a damaged rifle. Remember the Samsonite commercial. (For you younger shooters, it shows a monkey throwing the suitcase around in his cage at the zoo.) Baggage handling is NOT a fine art. There is no guarantee that your rifle case will be on top of all the other baggage. Then there is shifting of baggage in the belly of the plane. Ponder that for a while. Rifle and pistol cases must be locked. It doesn’t take a Rocket Scientist to figure out that a simple pry tool will open most case locks. There is not much that you can do to disguise a rifle case. It is what it is, and opportunists know this. Among thieves, it doesn’t take long for the word to get around about a NEW type of case.”
General Advice for Air Travelers
Ron cautions: “Keep your hands on your items before boarding. One of the most often heard comments from theft victims was, ‘I just put my computer down for a minute while I was on the phone.’ Also, get to the baggage claim area quickly. If your family/friends can meet you there, so can the opportunists. Things do get lost in the claim area. Don’t be a Victim. Forewarned is forearmed.”
Lapua Supports U.S F-TR Rifle Team
Lapua continues its support of the U.S. Rifle Team (F-TR) by donating Lapua factory-loaded .338 Lapua Magnum ammunition as part of a raffle package to raise funds for the Team. The raffle will take place this evening, on March 8, 2016.
The U.S. Rifle Team is raffling off a .338 Lapua Magnum Tactical Rifle donated and built by Kelbly’s Rifles. The raffle package includes a Nightforce Optics ATACR 5-25x56mm scope, 100 rounds of .338 Lapua Magnum 300gr OTM Scenar ammunition, plus a Gemtech Arrow suppressor
The total package value is over $9,000!
All of the proceeds from this raffle will be used to train and equip the U.S. Rifle Team as the team prepares for the 2017 World Championships in Canada.
About the U.S. Rifle Team (F-TR):
The U.S. Rifle Team (F-TR) is the two-time, Farquharson Target Rifle (F-TR) discipline World Championship winning squad. The U.S. Rifle Team competes regularly against other nation’s F-TR squads. At the 2013 World Championships, 17 nations were represented. The next World Championships will be held at Connaught Range near Ottawa, Canada in 2017. All of the rifles used in the F-TR class are chambered in either the .308 Winchester or .223 Remington calibers. This ensures a level playing field for all competitors. Every match winner can rightly say that it was their skill, not their caliber, that won the day. Most of our team events are fired at targets 1000 yards away. The inner-most scoring ring on our target is five inches in diameter. The next ring is ten inches in diameter. These shooters manage to put the vast majority of their shots inside that 10-inch ring at 1000 yards! Learn more about the US Rifle Team at www.USRifleTeam.com.
The U.S. F-TR Team Raffle, report by Ray Gross, Team Captain
Our raffle has been a huge success thanks to a number of sponsors who stepped forward to help out. A special thank you goes to Ian Kelbly, who offered to help out before I even asked. Kelbly’s became the first new sponsor of our team after I became Captain. Nightforce has been a long-time sponsor of our team and has been a huge help this cycle. Bryan Litz is a member of the team and his company, Applied Ballistics, is a sponsor. Bryan contacted Applied Ballistic Munitions and they happily donated ammo to our prize. Adam Braverman of Lapua, also a long-time team sponsor, sought us out, to help with our raffle.
What’s great about all of these companies is that we were already using their products, they didn’t have to sponsor us to get us to use them. We are in the business of winning and we have to use the best products. It speaks very highly of each of them that they are committed to supporting the shooting sports.
At the request of our readers, we have launched a “Deals of the Week” feature. Every Monday morning we offer our Bargain selections. Here are some of the best deals on hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. MidwayUSA — ‘Half-Acre’ Padded Shooting Mat (New Product)
This brand new over-size mat offers more padding and more surface area, making for greater comfort during extended prone matches or shooting sessions. This new “Half-Acre” shooting mat features 1.5″ of high-density padding, a sewn-in bipod pocket, and sturdy corner grommets (for staking down). The mat’s underside is constructed of textured, non-skid, water-resistant material. While it’s not really a “half acre”, this mat is definitely over-sized. With a 1.5″ hi-density foam core, this mat is much more comfortable that most other shooting mats. When not in use, the mat conveniently tri-folds for storage. Handle and shoulder strap allow for easy transport. We really like this new mat and it’s on sale this week at a special intro price of $89.99 at MidwayUSA.com.
2. Midsouth — 10% Off All Norma Brass in March
Norma makes excellent cartridge brass and now you save significantly on a wide variety of brass at Midsouth Shooters Supply. All Norma brass is 10% off this month at Midsouth. Cartridge types on sale include: 220 Swift, .222 Rem, .223 Rme, .22 PPC, 6mm PPC, 6mmBR, 6XC, .243 Win, .260 Rem, 6.5×55 Swede, 6.5-284, .270 Win, 7mm-08, 300 BLK, .308 Win, .30-06, .300 RSAUM, .300 Win Mag, and many other large calibers including the mighty .338 Lapua Magnum.
3. WeatherFlow — Remote Bluetooth Weather Meter
This handy, multi-function WeatherFlow Weather Meter provides key weather data to your iOS and Android Mobile devices wirelessly via Bluetooth. The unit measures temperature, humidity, air pressure and dew points. With its built-in impeller, the Weather Meter will also record wind speed (average and gust), and wind direction. Hand-hold it or attach it to a pole/tripod. This wireless Weather Meter is compatible with iPhone, iPad, iPod Touch and all major Android devices. This unit offers a lot of capabilities for $79.95 at Amazon.com.
A few years back, we comparison tested four laser rangefinders — a Nikon, Leica, Swarovski, and Zeiss. To make a long story short, three out of four testers preferred the Zeiss PRF Victory. While larger and heavier than the Leica CRF 1600, the Zeiss Victory PRF was easier to hold steady, and it ranged as well as the Leica (and better than the Swaro and Nikon). Now the Zeiss Victory is on sale for $605.48, making it $193.00 cheaper than Leica’s CRF 1600. With this price advantage, we think the Zeiss is the smart choice (unless you need an ultra-compact unit). A recent LRF comparison test in the UK reached the same conclusion.
5. Amazon — 34 NRR Top-Selling Ear Muffs
If you want serious hearing protection, and can tolerate large muffs, these Clear Armor earmuffs are hard to beat for the price. They seal very well and carry an unsurpassed 34db Noise Reduction Rating (NRR). These are the #1 Best Selling Safety Muffs on Amazon. Yes they are big and bulky — but you only have one set of ears. These are a good choice for loud magnum rifles and noisy indoor ranges.
This is quality, CCI made-in-USA ammo with reloadable, brass casings. We have used this CCI-made Blazer 9mm ammo in Sig, HK, and Glock pistols and it performed very well. This stuff won’t last long at this price (less than $0.20 per round). If you need 9mm practice ammo, order soon — this very same 1000-round case of Blazer 9mm ammo costs $60.00 more at MidwayUSA. Blazer Brass is loaded in boxer-primed, reloadable brass cases for added value.
7. CDNN Sports — Remington 597 for $149.99
Looking for a “first rifle” for a family member? Consider this semi=auto Remington 597. It currently retails for just $149.99. That’s right, for under $150 you can get a reliable, self-feeding rimfire rifle that will provide years of fun for a young shooter. The 597 has a stock that’s sized right for both youngsters and adults. Receivers are dovetailed for standard rimfire rings and are also drilled and tapped to allow mounting of Weaver-style bases.
Once you’ve used a geared head for your spotting scope, you’ll never want to go back to standard tripod controls. The Manfrotto 410 Junior Geared Head delivers precise 3-Axis control: 360° of pan (traverse), +90° to -30° of front tilt (elevation), and +90° to -30° of lateral tilt. When spotting, this makes it much easier to traverse from one target to another — you can move horizontally with no vertical movement. AccurateShooter’s editors use this model 410, which features a quick-release plate. This is a very good deal. This same Manfrotto 410 Geared head sells elsewhere for $270.00 or more.