|
|
January 8th, 2011
 Report by Dave Conrath
In the last week of December, 2010, two pending FTR records were set at the annual Snowbird X-Miss Match hosted by Florida’s Port Malabar Rifle and Pistol Club. Competitors traveled from as far North as Michigan (through heavy snow). At the match, conditions varied over the four days of shooting from 25-mph winds, to below freezing temperatures and frost, to burning swamplands including falling ash. In a superb performance given the conditions, Kent Reeve was Palma rifle and overall winner with 1799-99X (dropping only one point over the 3-day event). Keith Perry was overall iron sight winner with 1781-107X.
 New NRA 600-Yard Service Record Set by SSG Emil Kovan
SSG Emil Kovan (USAMU) and SFC James Gaston (BNX Rifle Team) took turns setting and resetting the NRA 600-yard individual NRA Service record. SFC Gaston shot a 198-11X, only to be bettered by SSG Kovan with a 200-11X.
Kovan uses a GA Precision-built, Surgeon-actioned, .308 Win rifle. It has a 26″, 11-twist barrel for tactical competitions, plus a 29″, 10-twist twist tube for F-T/R, both chambered in .308 Win. The 26″ BBL is chambered for 175-190 grain bullets, while the 29″ is throated for 210-grainers. Kovan shots moly-coated Berger 210gr VLDs in the longer barrel. He reveled that he loads “bullets long so they get soft seated .010″ when [closing] the bolt”.
In F-TR class, SSG Kovan won for the second year with a 1772-75X, Nik Taylor took second overall with 1769-69X, SFC Gaston took third place 1739-75X. In an extremely tight race in F-Open Class Michael Dana was first with 1765-36X, Mark Finizio took second with 1764-68X, Tom Goodman finished third with 1763-62X.
BNX Rifle Team Sets Pending F-TR Team Record
During the team matches on the final day, the BNX rifle team from Coastal Carolina Rifle Club at Camp Lejeune shot a new, pending F-TR 4-Man Team National record with a 794-37X. Shown below are BNX Team members (left to right), SFC James Gaston (200-9X), Tony Robertson (199-11X), Dave Conrath (197-7X), Tom Goodman (Asst. Coach/Scorer), Nik Taylor (198-10X) — Team Captain and Wind Coach.
November 2nd, 2010
Brenda Hill of Bakersfield, California won the F-Class Regionals (Open Class) held in Coalinga, CA over the past weekend. In the course of winning the Regionals, Brenda set a new, pending, F-Class, Open Division, Womens’ score record at 1,000 yards. Brenda set the pending Women’s 1K Record with a score of 200-9X, breaking her own 199-9X NRA Record set on 10/25/2008.
Brenda was shooting a 6mm BRX built by Leroy Johnson of Johnson’s Precision Gunsmithing. Leroy has built many very accurate rifles for California shooters, and he is very knowledgeable about the 6BRX cartridge. Brenda certainly proved this little cartridge can be competitive at 1000 yards.
September 27th, 2010
 We’ve confirmed that Danny Biggs, the Spirit of America’s F-Open Class Winner, shot the match using a bipod, rather than a pedestal rest. This is pretty remarkable because top F-Open competitors have traditionally preferred the stability and quick adjustability you get with a deluxe pedestal rest such as a Farley, John Loh (J.J. Industries), or SEB. Of course, Danny had a trick up his sleeve — his prototype Sinclair International bipod features a quick-adjusting elevation control. No, you can’t buy a bipod like Danny’s — at least not yet. Sinclair Int’l hopes to offer production versions before the end of 2010.
Sinclair staffer Pete Petros competed at the 2010 SOA Match, and recounted his experiences in Sinclair’s Reloading Press. Concerning Biggs’ bipod, Petros wrote:
An interesting fact about Biggs’ win is that he was shooting off of the Sinclair F-Class Bipod which is generally used in F-TR competition. In F-Class open most competitors shoot off of a bench-type rest modified to shoot off of the ground in the prone position. The bipod Biggs [used] is a new-model Sinclair Elevation-Adjustable version of the newer Sinclair F-Class Bipod. Danny has been testing this product for us during the past year and obviously is having great results. We should have these bipods ready for production in a few months. Keep posted to our website for announcements. But trust me, I think Danny would shoot well balancing his gun on a rock –- he’s that good!
 While most F-Open shooters used a front pedestal rest, either a joystick design or a center column pedestal with remote-adjustable windage top, Danny used a wide-base bipod, as he had done at past Nationals in the F-TR class. But Danny’s bipod was very special. It is a prototype, modified Sinclair design with height adjustment via a central, vertical-axis knob.
As you can see from the pictures below, the left and right bipod legs are attached to a T-shaped silver (aluminum) bracket. This bracket moves up and down as the silver knob is turned clockwise or counter-clockwise. As the knob turns, its threads pull the T-shaped bracket up and down relative to a center block of aluminum bolted to the bipod’s attachment to the rifle’s forearm accessory rail. With this system, Danny can easily reach forward and make precise adjustments in elevation. Note that the Sinclair bipod’s secure rail attachment is retained and Danny can still adjust rifle cant (tilt), using the rear push-button handle. This rear handle functions like a Pod-lock allowing the rifle to be tilted a few degrees to one side or the other to compensate for side-sloping terrain.
July 29th, 2010
 Charles Ballard, two-time U.S. F-class Open Champion, has been working with Precision Rifle & Tool on a new F-TR (Target Rifle) stock. Charles designed the stock to combine the adjustability of the better F-Open designs with a nice rigid fore-end for bipod use. Charles has shot the new stock in competition and he says it tracks really well. When fitted with a wide-base bipod, the stock is super-stable, with minimal hop on recoil.
The new stock is officially called the “Ballard LowBoy F-Class Target Rifle (F-TR) Stock”. This new design is available immediately, in a variety of laminated colors, starting at $325.00 (without hardware). The stock can be inletted for Rem 700 actions, Rem 700 clones, the Savage Target Action, and most custom actions.
Key Features of the new Ballard F-TR stock are:
- Extended front to provide proper balance with long barrels.
- Low profile design for a lower, more stable center of gravity.
- Buttstock has a 1/2″ machined flat on the bottom and angled sides to provide superior tracking in the rear bag.
- Buttstock has a slight angle to allow minor elevation adjustments.
- Optional adjustable buttplate and optional adjustable cheekpiece.
Stock Delivery Options Dictate the Price
Precision Rifle & Tool can deliver the Ballard LowBoy F-TR in any state of completion the customer desires. The basic stock costs $325, inletted for your action, but unfinished and without hardware. Complete with removable/adjustable cheekpiece, and adjustable buttplate, the stock costs $900.00 ready to be bedded and finished. Clear-coating or oil finish is available at extra cost.
In the video, Charles Ballard gives you a “walk-around” of the stock and explains the stock’s design features. The high-tech, carbon fiber bipod is made by Center Shot Engineering in Oregon. For more info, or to order a Ballard LowBoy F-TR stock, visit PrecisionRifleSales.com, or call (336) 516-5132. Charles Ballard himself can talk you through the options.
|
