Don’t Get Barrel-Busted! Federal Barrel Length Requirements
The Legal Brief is a feature of TheGuncollective.com that focuses on firearms rules and regulations. In this Legal Brief video, Attorney Adam Kraut explains key State and Federal regulations governing firearms, and explains how to ensure compliance with all applicable laws.
This five-minute video explains barrel length rules for rifles and shotguns, and also explains the best (and most fool-proof) methods to measure your barrel. In addition, the video explains how to measure firearm overall length. A rifle or shotgun which is less than 26 inches overall can also be classified as a “Short-barreled” rifle/shotgun subject to the NFA. NOTE: Under federal law “If the rifle or shotgun has a collapsible stock, the overall length is measured with the stock EXTENDED”.
Highlights of LEGAL BRIEF Discussion of Barrel Length and Firearm Overall Length
The ATF procedure to measure the length of a barrel is to measure from the closed bolt or breech face to the furthest end of the barrel or permanently attached muzzle device. ATF considers a muzzle device that has been permanently attached to be part of the barrel and therefore counts towards the length.
How to Measure Barrel Length: Drop [a] dowel or rod into the barrel until it touches the bolt or breech face, which has to be closed. Mark the outside of the rod at the end of the muzzle crown (if you don’t have a permanently attached muzzle device) or at the end of the muzzle device if it is permanently attached. Remove the rod and measure from the mark to the end of the rod. That is your barrel length[.]
Remember, if the barrel length is less than 16 inches, it is possible that the firearm could be a short barrel rifle (if you are building a rifle or it is already on a rifle) and if the barrel length is less than 18 inches, it is possible the firearm could be a short barrel shotgun (again if you are building a shotgun or it is already a shotgun). Both of these firearms would be subject to the purview of the National Firearms Act and would require the firearm to be registered accordingly.
How to Measure Overall Length:The overall length of your rifle or shotgun may also classify it as a Short Barrel Rifle or Short Barrel Shotgun. The overall length of a firearm is the distance between the muzzle of the barrel and the rearmost portion of the weapon measured on a line parallel to the axis of the bore. … If the rifle has a permanently attached muzzle device, that is part of the overall length. … If the rifle or shotgun has a collapsible stock, the overall length is measured with the stock extended.
READ FULL ARTICLE on Ammoland.com.
Links for this episode:
ATF Method for Measuring Barrel Length and Overall Length:
ATF: CHAPTER 2. WHAT ARE “FIREARMS” UNDER THE NFA?
Firearm – 26 USC § 5845: https://www.law.cornell.edu/uscode/text/26/5845
Firearm – 27 CFR § 479.11: https://www.law.cornell.edu/cfr/text/27/479.11
Short Barrel Rifle – 18 USC § 921(a)(8): https://www.law.cornell.edu/uscode/text/18/921
Short Barrel Rifle – 27 CFR § 478.11: https://www.law.cornell.edu/cfr/text/27/478.11
Short Barrel Shotgun – 18 USC § 921(a)(6): https://www.law.cornell.edu/uscode/text/18/921
Short Barrel Shotgun – 27 CFR § 478.11: https://www.law.cornell.edu/cfr/text/27/478.11