September 18th, 2018

Cool Tools for the Reloading Room — Look What UPS Brought

21st Century Tools Concentricity Checker lathe neck turner turning scale UPS

Posting on Facebook, Michael W. said: “Maybe it’s just me but I LOVE coming home to packages from the UPS driver sitting on my deck! Now I can get serious about creating some Match Grade ammunition!” Michael showed off some very impressive reloading hardware, including a 21st Century Shooting “Mini-Lathe” Neck-Turning system, 21st Century Concentricity Gauge, Shars Tube Micrometer, and the A&D FZ-120i Precision Balance. Cool Tools indeed!

21st Century Neck-Turning Lathe — A Gem
The 21st Century Neck-Turning Lathe works great — this is what we use to turn necks. It floats at both ends, so it runs very smoothly. You can use it manually or with power. It gives you very precise, clean cuts with a minimum of case lube. The cutting tool is hard and sharp so you can do large quantities of brass without having to adjust the cutter position for wear. We’ve used a half-dozen neck turners and this 21st Century Unit is our favorite.

21st Century Tools Concentricity Checker lathe neck turner turning scale UPS

21st Century Concentricity Gauge — Smart, Efficient Design
The beautifully-crafted 21st Century Concentricity Gauge is fast and easy to use yet very precise. The twin, roller-equipped case supports slide back and forth on rails so you can measure any size case, from a 17 Fireball up to a 50 BMG. The horizontal dial indicator also slides on parallel rails so you can easily measure any spot on a case or loaded round — from bullet tip (or case mouth on empty case) down to the mid-body. We like to measure run-out on our sized, empty brass on the necks and then measure again on the bullet ogive with loaded rounds. The large-diameter wheel allows bump-free, “no wobble” case rotation, delivering better results than spinning cases with your fingers.

Concentricity gauge uses stainless turning rollers for less friction and more consistent read-outs.
21st Century Tools Concentricity Checker lathe neck turner turning scale UPS

A&D Precision Balance — Ultra-Precise with No Drift
The A&D FX and FZ-series scales are magnetic force restoration balances with 0.001 gram sensitivity so they are accurate to the kernel. This balance will not drift like less advanced, load cell-based digital scales. The scale’s high sensitivity and extreme stability allow you to weigh charges and sort brass, primers, and bullets with much higher precision.

What Gadget Would YOU Like To Have Delivered?
Here’s a question for our readers… What are YOUR favorite reloading tools on currently on your bench? And if you could have the UPS driver deliver a new tool tomorrow, what would you like him to bring? A 21st Century Hydro Bullet Seater (awesome Arbor Press)? Maybe a Whidden Micro-Adjustable Sizing Die? How about the amazing Auto Trickler and Auto-Throw system from Canada? That combines a A&D FX/FZ scale with a powder thrower and microprocessor-controlled trickler. With the push of a button you get a charge dispensed and weighed to single-kernel accuracy.