May 7th, 2020

Progressive Presses — Video Showcase of Six Machines

ultimate reloading progressive press review dillon Mark 7 rcbs lee hornady

COVID-19 stay-at-home orders have created abundant free time at home for millions of Americans. To fill otherwise empty hours, we know many readers have been reloading ammo — LOTS of ammo. And quite a few of you folks are thinking of getting a progressive press to increase output. Because multiple operations take place with a single pull of a lever, a progressive press can produce way more ammo in a given period of time than any single stage press. With a progressive, on the ram up-stroke, the multiple stations can simultaneously remove spent primer, full-length size case, drop powder, seat bullet, and crimp (if desired). Most progressives are also set up to prime cases with the ram in the lower position — though some guys prefer to prime manually.

Progressive presses aren’t just for high-output pistol ammo or bulk rifle ammunition. Good progressives can be adapted to do certain reloading tasks for top-on-the line match ammo. You might use a progressive for decapping, priming, and sizing, then throw powder and/or seat bullets separately. Some Champion shooters do use progressives to load their match ammo! For example 5-Time National Long Range Champion John Whidden and 2020 Berger SWN F-Open Champion Jay Christopherson both use progessive presses for some (but not all) operations.

To help you get started with progressive presses, here are five videos from UltimateReloader.com that cover six popular machines, from the elite Mark 7 Evolution to the inexpensive Lee Pro 1000. With many of these machines you can add separate vertical bullet feeder systems that further increase loading efficiency.

Mark 7 Evolution Press — Distributed by Lyman

Dillon XL-650 vs. Dillon XL-750

RCBS Pro Chucker 7 with Bullet Feeder

Dillon 550C with 6mm Creedmoor and 9x19mm

Lee Pro 1000 Features and Operation

Better Safe Than Sorry — the RCBS Lock-Out Die
RCBS Makes a “Lock-Out Die” that senses the powder charge. This will halt the Progressive press if you have a double charge, or an undercharge. Your Editor has the Lock-Out Die on his RCBS Pro 2000. It has “saved his bacon” a half-dozen times over the years. It can be used on Dillon and Hornady progressives as well as RCBS machines.