Cortina’s Corner — Video Review of Forster Co-Ax Reloading Press
Forum member Erik Cortina has produced a series of YouTube videos about reloading hardware and precision hand-loading. This week we feature Erik’s video review of the Forster Co-Ax® reloading press. The Co-Ax is unique in both design and operation. It features dual guide rods and a central handle. You don’t screw in dies — you slide the die lock ring into a slot. This allows dies to float during operation.
Erik does a good job of demonstrating the Co-Ax’s unique features. At 1:00 he shows how to slide the dies into the press. It’s slick and easy. At the two-minute mark, Erik shows how sliding jaws clasp the case rim (rather than a conventional shell-holder). The jaws close as the ram is raised, then open as it is lowered. This makes it easy to place and remove your cases.
At the 5:20 mark, Erik shows how spent primers run straight down into a capture cup. This smart system helps keep your press and bench area clean of primer debris and residues.
While many Co-Ax users prime their cases by hand, the Co-Ax can prime cases very reliably. The priming station is on top of the press. Erik demonstrates the priming operation starting at 4:20.
Smart Accessories for the Co-Ax from Inline Fabrications
Lapua’s Kevin Thomas also owns a Co-Ax press, which he has hot-rodded with accessories from Inline Fabrications. Kevin tells us: “Check out the add-ons available from Inline Fabrications for the Co-Ax. I recently picked up a riser mount and a set of linkages for mine and love the results. The linkages are curved. When you replace the original straight links with these, the work area opens up substantially and the the press becomes much easier to feed.” CLICK HERE for Co-Ax Accessories.
| Inline Fabrications Forster Co-Ax Accessories | |
|
Forster Co-Ax Curved Side Linkage
|
Forster Co-Ax Ultramount
|
|
Co-Ax Roller Lever (Short)
|
Dual LED Lighting Kit for Co-Ax
|
Have you ever seen bullet trace? Do you know how to read trace? Well watch this NSSF video to learn how to recognize trace, and use trace to help adjust your aim on the target. Watch the video from 1:50 to 2:20 to see trace in slow motion. Watch carefully starting and you can see the trace in the milli-seconds before the bullet hits the target.
