Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









August 4th, 2019

Sunday GunDay — .22 LR Rimfire Silhouette Match Rifle

Erich Mietenkorte .260 Bobcat silhouette rifle Lilja

The Modern Smallbore Silhouette Rifle
Smallbore rifle silhouette is a shooting discipline that can really test a shooter’s ability and fundamentals. The saying in silhouette is “the bench proves the rifle, standing proves the shooter”. To be able to stand and shoot a rifle at targets ranging from 40 meters to 100 meters is no small feat, especially when the 100 meter ram target is just a little bigger than a large potato.

Of course, you need a good rifle. The CZ 455 has been at the top of the starter rifle list for a long time, however, a few newcomers such as the Tikka T1x are definitely challenging that spot. The gold standard in the silhouette discipline seems to be the venerable Anschutz 1712. With a fantastic two-stage trigger, smooth operation, great balance, and consistent accuracy it’s one of the most popular rifles, just look through the equipment survey from the U.S. Nationals and you will see what I mean. Even though the Anschutz is a great rifle, there are those competitors who want more. Enter Erich Mietenkorte, a Master silhouette shooter from Ellensburg, Washington and his P-51 Mustang-inspired .22 LR silhouette rifle.

Erich Mietenkorte .260 Bobcat silhouette rifle Lilja
The P-51 Mustang artwork was masterfully painted by Perry Mallet of Spokane, WA from a basic theme sketched out by Erich. This is one of the coolest gunstock paint jobs we’ve ever seen. Bravo Mr. Mallet!

Erich’s Smallbore ‘Silhouette Slammer’

Report by Erich Mietenkorte
At the heart of my .22 LR “Silhouette Slammer” is a Sako P94s Finnfire action. I chose this action due to its incredibly fast lock time. Mated to that is a tight-bore Lilja 4-groove barrel finished at 24 inches. This has a Winchester 52D chamber. The barrel and chamber combination were suggested by Loren Peter of Vancouver, WA, a long time silhouette shooter and gunsmith, and it definitely works! The rifle easily and consistently shoots under one inch at 100 meters with good ammo.

Finnfire Fitted with Modified Anschutz 2-Stage Trigger
The Finnfire was originally equipped with a single-stage trigger but I decided that a two-stage works better for me. There weren’t any available options at the time so I took an Anschutz 5109 trigger from a model 1712 and machined a new sear and mated it up to the action.

CLICK to Zoom Photo
Erich Mietenkorte .260 Bobcat silhouette rifle Lilja
Click Image for large, full-size photo showing details of paint-work.

The rifle wears a Leupold FX-3 25-power optic, a scope favored by many silhouette shooters for its clarity, magnification, and relatively light weight. To make weight in Hunter Class, the rifle may weigh no more than 8.5 pounds total with optic! The last component that makes up this winning rifle is the amazing work of art that is the stock. All of these components rest in a custom fiberglass stock made specifically to push the limits of the NRA stock jig that all competition silhouette rifles must fit. The stock was constructed by Steve Wooster, a long-time silhouette shooter from Chehalis, WA. The P-51 Mustang artwork was masterfully painted by Perry Mallet of Spokane, WA from a sketch I did. Perry took an idea and used his artistic abilities to create a masterpiece that looks as good as it shoots.

Erich Mietenkorte .260 Bobcat silhouette rifle Lilja

Getting Started in the Silhouette Game
Erich’s advice for anyone wanting to get started in the fun and challenging discipline of silhouette is to take any .22 LR scoped rifle you have and simply show up at a silhouette match. On many occasions Erich has helped newcomers and has even loaned out his own rifle for novices to try. “One of the best things about silhouette is the generosity and friendliness of the competitors. Silhouette is a shooting sport that you don’t have to be intimidated, all shooting abilities are welcome and everyone has an opportunity to be successful.” To learn more about silhouette shooting, or locate a silhouette match near you, visit Steelchickens.com, a popular silhouette-centric web forum.

In this Video Erich Mietenkorte Shoots Rams at 100M with his .22 LR Silhouette Rifle:

Erich Mietenkorte .260 Bobcat silhouette rifle Lilja
Note the bullet impact locations on those 10 turkeys — that would be about a 1″ group. Great shooter with a great rifle. In Canada two weeks ago, Erich set a new Ram “long run” record, hitting 30 in a row.

The Three Amigos — Along with his P-51 paint job smallbore rifle, here are two of Erich’s centerfire silhouette rigs. Erich notes: “The green rifle is my High Power silhouette standard rifle (class weight limit 10 lbs. 2.0 oz.). This features a Defiance Machine Rebel action with a Lilja #6 Contour barrel finished at 26″. This rig is chambered in .260 Bobcat (aka 6.5×250, i.e. 250 Savage necked up to 6.5mm). This cartridge has the same energy as a .260 Remington but much less felt recoil. It is very efficient and makes a big difference when shooting a lot of rounds in a match.” Stock by Steve Wooster.

Erich Mietenkorte .260 Bobcat silhouette rifle Lilja

The brown rifle (upper right) is a blueprinted Remington 700 action with a Lilja #5 Contour barrel finished at 26″, also chambered in .260 Bobcat. Erich tells us: “I won Second Place at the U.S. National Championships last year with this rifle. Stock made by Wooster. This rifle is for the hunting rifle category (9-lb weight limit). For Hunter rifles in smallbore and High Power the trigger must have a safety and a pull weight at least two pounds. (By contrast, a Standard rifle may have any weight trigger with/without a safety.) Because you can shoot a Hunter rifle in the Standard rifle class, I started my High Power silhouette journey with this rifle and then added the Standard rifle later. I’ll be replacing this rifle this upcoming season with a Defiance Rebel action and barrel chambered in 6mm BR.”

Erich Mietenkorte .260 Bobcat silhouette rifle Lilja

Permalink - Articles, - Videos, Competition, Gear Review 4 Comments »
August 4th, 2019

The “REMAGE” Option — Pre-Fit Barrels for Rem 700 and Clones

Mcree Precision Mcrees Savage Remington pre-fitted pre-chambered pre-fit barrel system kit nut
McRee’s Precision Remington DIY Barrel Kit includes Criterion Pre-Fit Stainless Barrel, Barrel Nut, Recoil Lug, Thread Protector, and Barrel Nut Wrench:

Need a new barrel for your Rem-actioned hunting or tactical rifle? Here’s a great DIY option for riflemen. McRee’s Precision offers complete, no-gunsmithing re-barreling kits for Remington and Rem-clone actions. These feature a high-quality, pre-chambered “PRE-FIT” stainless barrel from Criterion, a Savage-style barrel nut, a recoil lug, and a special barrel-nut wrench. Most of the Pre-Fit barrels are 24″ long and threaded at the muzzle. CLICK Here for all Pre-Fit barrel specs.

With this system you can easily re-barrel your favorite Remington rifle yourself in less than an hour. You don’t need to pay gunsmithing fees, or wait weeks (or months) for a busy smith to do the job. And the price is under $500.00. Kits are currently available for these chamberings: 6.5 Creedmoor, 6mm Creedmoor, .243 Win, .308 Win, .308 Winchester Magnum. You can buy with confidence — McRee’s Precision offers a Half-MOA Accuracy Guarantee with its pre-fitted barrel kits.

Mcree Precision Mcrees Savage Remington pre-fitted pre-chambered pre-fit barrel system kit nut
The stainless steel Barrel Nut is set up for 1 1/16 x 16 barrel threads, while the stainless steel recoil lug has a 1/8 inch removable locator pin and is set up for 1.0625 dia barrel threads.

McRee’s Precision sells Rem-action Pre-Fit barrel packages (complete with barrel nut, recoil lug, and wrench) starting at $489.52. Choose from five chamberings: 6.5 Creedmoor, 6mm Creedmoor, .243 Win, .308 Win, and .300 Win Mag. These Pre-Fit barrel kits come ready-to-install. All you need to do is remove your current barrel, place the recoil lug, spin on the new tube, follow the instructions for setting head-space with standard go/no-go gauges, then torque the barrel nut against the lug. NOTE: You may require a barrel vise and action wrench to remove the original barrel. Chambering-specific headspace gauges required. Minor inletting changes may be needed forward of the action.

Mcree Precision Mcrees Savage Remington pre-fitted pre-chambered pre-fit barrel system kit nut

The folks at McRee’s Precision say their Pre-Fit system offers many advantages: “Remington Pre-Fitted Barrel Kits have become popular over the years. If Savage can do it, why not for our Remingtons? Our [Criterion-supplied] barrels are spec’d to the McRee standard of performance. There are several places to get the tools required to remove your factory barrel correctly. Once you have your barrel removed all you have to do is follow the normal Savage procedure to install your new barrel. We recommend that you contact your local gunsmith for the install. Feel free to call us with any questions.”

Product Tip from Ed LongRange. We welcome readers’ submissions.
Permalink Gear Review, Gunsmithing, Tech Tip 1 Comment »