Need to Swap Barrels? Get Grizzly Barrel Vise for $38.95

Grizzly.com has a handy product that should prove very useful for readers who need to swap barrels. This CNC-Machined aluminum barrel vise can be used in your home workshop, or on the road. In the field the vise can be fitted to a block of wood which can then be temporarily clamped to a bench. Or, as you can see below, you can mount the vise to a trailer hitch for use during a match or varmint hunt. The barrel vise is currently ON SALE for just $38.95.

This vise was designed by a member of the U.S. Shooting Team for quickly changing barrels up to 1.5 inches in diameter. Made of T-6061 Aluminum, the top clamping part of the vise is spring loaded so you can hold the gun with one hand while tightening the two nuts with the other. Grizzly notes: “Sometimes the action and scope can even remain on the rifle stock while the barrel is changed out.”

Clamping Range: Secures 7/8″ to 1.5″ Diameter Barrels
Block Dimensions: 5″ x 2.5″ x 1.4″ (Upper); 7.5″ x 2.5″ x 1.1″ (Lower)
Bolt Diameter: 3/4″ | Mounting: Use 1/2″ Hex Bolts to secure

IMPORTANT: This vise was designed for 7/8″ to 1.5″-diameter barrels. It may not work correctly with barrel diameters outside that range, or with unusual barrel contours. Not recommended for fine, polished blued steel barrels unless you protect the barrel surface before clamping. For most situations, where practical, we would remove the barreled action from the stock before using the vise.

Similar Posts:

• Affordable Barrel Vise from Grizzly.com
• PMA Tool Now Carries High-Quality Bob Pastor Barrel Vise
• Cabela’s Gun Vise $24.99 — Versatile and VERY Affordable
• New Semi-Floating Action from Competitive Edge Gunworks
• New F1 F-Open Stock from Competition Machine

Tags: Barrel Clamp, Barrel Swapping, Barrel Vise, Grizzly.com