For this 2026 Super Bowl Sunday, we celebrate the beauty of highly-figured wood with a collection of custom rifles. In our Shooters’ Forum, there is a long-running Gun Glamour thread that showcases many beautiful wood-stocked rifles. Today we feature some very handsome rifles from that Forum Thread as well as other rifles we’ve featured in the Daily Bulletin.
Two F-Open Beauties with Walnut Laminates
Cerus-stocked Special from Cigarcop
Forum member Keith W. (aka “Cigarcop”) of KW Precision LLC is a talented riflesmith whose projects display outstanding finish work and attention to detail. Keith does some of the best bedding work we’ve ever seen. Back in 2018, Keith built a stunning .284 Win F-Class rig for a shooter in Delaware. It’s a beauty, that’s for sure.
Check out the stunning Cerus F-Open stock. This features multiple laminations with highly-figured Walnut on the sides. This certainly ain’t your “off-the-shelf” laminated stock. This just shows the beauty that can be achieved with carefully-chosen lamination layers (plus 12 coats of clear).
This beautiful F-Open rig features a laminated wood stock with stunning figured walnut on the outside.
Another KW Precision F-Open Beauty
Here’s another stunning F-Open rig crafted by Keith of KW Precision. This features a BAT M action with BixN’Andy trigger. The 1:9″-twist Brux barrel is chambered in 7-6.5 PRC and fitted with a Cortina V2 Tuner. The handsome laminated Dennis Ray stock carries a Hart R.A.D. 2A recoil reduction system.
A Beauty for the Boss (of Grizzly.com)
This F-Class rifle belongs to Shiraz Balolia, Chairman/CEO of Grizzly Industrial. Shiraz finished the stock himself: “I installed the bottom wider track for my rear bag and also carved out the finger grooves in the grip. The blank was quite long so I cut off approximately two inches from the front end of each stock and also deepened the large tracking cavity under the fore-end. I went ahead and inlaid my name in Mother-of-Pearl on the Walnut stock.” The stock was then sent to Sims Guitar Finishing for clear coating with “wet look” finish. This rifle is chambered for the .300 Shiraz wildcat, an improved .300 WSM.
F-0pen Stock made of highly-figured Walnut with Curly Maple inner laminations.
Beautiful Rifles from our Forum Gun Glamour Thread
Here are a variety of handsome wood-stocked rifles from our Forum Gun Glamour thread. In that thread, member Kurz posted a dream gun owned by a friend in England. Kurz included a quote from a book created by the rifle’s owner: “There, with my father’s words ringing in my ears, I shall take that ‘step forward’ and order a perfect machine based on the Mauser ’98 action, built from metal and wood by master craftsmen who truly understand that ‘reliable’ and ‘mechanical integrity’ have as much relevance today as they did all those years ago.”
A gun can “shoot dots” and still be handsome. Here is a short-range benchrest rifle with a stunning, exhibition-grade Walnut stock. Forum member Josh B found this beauty.
Forum member JRS submitted a stunner from Europe. This beauty features a truly exquisite piece of wood with elaborately engraved receiver. It also has escutcheons and special metal work on the grip.
Lever-action Falling Block rifles can be beautiful too. This one features a color case-hardened receiver and handsome two-piece fancy wood stock. This was submitted by Forum member Kurz who notes: “Besides exhibition grade walnut, I like the variations available in spalted maple for rifle stocks.”
Here is member Oldduc’s Stevens 44 1/2, .38-55 Black Powder Cartridge Rifle, with an extra .218 Mashburn Bee barrel. Very nice blueing along with the figured wood stocks and fore-arms.
A competition rifle must be “performance first”. But that doesn’t mean they can’t be handsome too. Forum member XTR’s rifle, an F-TR rig, features Maple wood with Bubinga tips.
And wood can work for Benchrest rifles too, when cleverly fashioned in thin carbon-reinforced laminates. Photo from member mdman352.
“Wood is Good” — as demonstrated by all the rifles showcased above. In the photo below, master stock-builder Doan Trevor handcrafts a highly-figured wood stock.
This popular video, viewed 3.9 million times on YouTube, provides a clear explanation of Minute of Angle (MOA) and how that angular measurement is used. Among novice shooters, there is much confusion over this term. In this NSSF Video, Ryan Cleckner, a former U.S. Army Sniper Instructor, defines the term “Minute of Angle” (MOA) and explains how you can adjust for windage and elevation using 1/4 or 1/8 MOA clicks on your scope. This allows you to sight-in precisely and compensate for bullet drop at various distances.
For starters, Ryan explains that, when talking about angular degrees, a “minute” is simply 1/60th. So a “Minute of Angle” is simply 1/60th of one degree of a central angle, measured either up and down (for elevation) or side to side (for windage). At 100 yards, 1 MOA equals 1.047″ on the target. This is often rounded to one inch for simplicity. Say, for example, you click up 1 MOA. That is roughly 1 inch at 100 yards, or roughly 4 inches at 400 yards, since the target area measured by 1 MOA increases in linear fashion with the distance.
More Minute of Angle (MOA) Explanatory Videos
This Gunwerks video explains that Minute of Angle subtends approximately 1″ for each 100 yards (well, 1.047″ to be more precise). That means a Minute of Angle increases in actual measured size the greater the distance of the target from the shooter.
This lengthy (24-minute) video defines Minute of Angle, and uses multiple diagrams to illustrate how MOA angular measurements works. The video also how MOA-based click values translate to point-of-impact changes at various distances.
Do you know what the inside of a rifle chamber (and throat zone) really looks like? Do you understand the concept of headspace and why it’s important? If not, you should read the Brownells GunTech article Gauging Success — Minimum Headspace and Maximum COL. This article explains the basics of headspace and shows how to measure headspace (and length to lands) in your barrels with precision. The article also explains how to adjust your full-length sizing dies to “bump the shoulder” as needed.
Why is headspace important? The article explains: “Controlling headspace and setting proper C.O.L. also represent improved safety and reduced cost of handloading. Excessive headspace can cause case head separation and gases in excess of 60,000 PSI escaping from a rifle’s chamber. Too little headspace can result in a chamber forced bullet crimp and a bullet that becomes an obstruction more than a properly secured projectile. Excessive C.O.L. can result in a rifling-bound bullet, a condition that could result in spikes of excessive pressure.” [Editor’s NOTE: It is common for competitive benchrest shooters to seat bullets into the rifling. This can be done safely if you reduce your loads accordingly. With some bullets we often see best accuracy .010″ (or more) into the lands. However, this can generate more pressure than the same bullet seated .010″ away from initial lands contact. As with all reloading, start low and work up gradually.]
How is headspace specified? Most cartridges used within the United States are defined within ANSI/SAAMI Z299.3-4. Brownells explains: “In the case of the .243 Winchester, as an example, there are pressure specifications, cartridge drawings and, as pictured above, chamber drawings. Armed with a chamber drawing, each manufacturer producing a firearm for the .243 Winchester knows the proper standard dimension to cut chambers and set headspace. Notice there are two headspace reference dimensions for the chamber. The upper is a place in the chamber where the shoulder is .400″ in diameter; the “datum” or “basic” line. The lower is the 1.630″~1.640″ minimum – maximum dimension from the breech face (bolt face) to that point in the chamber that measures .400″.”
The actual headspace of any firearm is the distance from the breech face to the point in the chamber that is intended to prevent forward motion of a cartridge.
Finding Cartridge Length to Lands with OAL Gauge
Using a comparator on a set of calipers, you can quickly determine cartridge base-to-ogive length. This is the measurement from the base of the case to the forward-most full diameter section of the bullet, which is for convenience called the ogive. (Technically, the “ogive” is the full curve from bullet tip back to full-diameter ring). Shown here, that ogive is 0.243″ diameter.
The next step is using a modified (threaded) case with a Hornady OAL tool to determine Length-to-Lands (LTL) in your rifle’s chamber. During this measurement process, the modified case, with a bullet in its neck, is inserted in the chamber. Go slow, take your time. Here are 5 tips that will help you get repeatable and reliable LTL measurements:
1. Start with a clean chamber and clean barrel throat.
2. Make sure the modified case is fully screwed down and seated on the OAL Gauge. It can sometimes unscrew a bit during repeated measurements.
3. Insert the modified case slowly and gently, but ensure the shoulder of the modified case is fully seated on the end of the chamber.
4. Push the gray plastic rod GENTLY. It is common for the bullet to be tilted a bit. You want to allow the bullet to self-center in the throat BEFORE you apply much pressure. Then tap a couple times and push until you feel resistance. Do NOT push too hard — that will jam the bullet in the lands.
5. Repeat the measurement at least 3 more times. If you follow our instructions, you should, typically, get a repeatable measurement, within 0.0015″ or so, 3 out of 4 times.
Today’s Saturday Movies article spotlights dozens of new handguns, most of which were displayed at SHOT Show 2026 in Las Vegas. These new pistols range from ultra-lightweight carry pistols to big, long-barreled guns designed for IPSC and speed-shooting matches. Nearly all major makers have pistols featured in these videos, with new handguns from Beretta, Canik, CZ, FN, Glock, KelTec, Kimber, Ruger, SIG Sauer, Smith & Wesson, Springfield Armory, Staccato, STI, Walther and more. Many of these videos include outdoor range testing footage as well as coverage from SHOT Show.
30 New Handguns from SHOT Show 2026
In this 17-minute video, our friends at GunsAmerica examine 30 new handguns, from striker-fired carry guns to all-metal competition pistols. The video also features revolvers, 2011s, and some truly wild new designs. Featured brands include: Alpha Foxtrot, Archon, Beretta, Bersa, Chiappa Rhino, CZ, Flux Defense, KelTec, Kimber, Laugo Arms, OA Defense, Ride Out Arsenal, Ross Martin, SAR, SIG Sauer, Smith & Wesson, Springfield, and STI with some brands having multiple offerings.
Timestamp
0:19 – 0:57 Ross Martin
0:57 – 1:35 Chiappa Rhino
1:35 – 2:03 SAR
2:03 – 3:24 Springfield
3:24 – 4:09 KelTec
4:09 – 5:09 Archon
5:09 – 5:49 Rideout Arsenal
5:49 – 8:05 Smith & Wesson
8:05 – 10:26 Bersa
18 New Handguns (or Pistol Kits) at SHOT Show 2026
This 55-minute video covers 18 pistol products displayed at SHOT Show 2026. There is a vast selection of semi-auto handguns plus a couple build kits and revolver frames. All the footage from this video was taken indoors at SHOT Show at the display booths. There is no supplemental video of pistols being shot at a range.
NOTE — If you want to see something truly radical and unique, check out the Third Bay “Ounce” folding rimfire pistol — one of the lightest-weight carry pistols ever created (see 18:33 time-mark and photo right). This folding handgun weighs about 8 ounces as loaded with ten .22 LR rounds.
Timestamp
02:17 – The Zermatt Waltz
07:49 – Staccato C4X
10:11 – Miller Precision
14:26 – Ride Out Arsenal Dragon
18:33 – Third Bay Ounce .22LR
20:19 – Jacob Grey Nox 9
Timestamp
39:47 – SDS Model 2035
41:28 – Canik Radian Prime
42:47 – PSA Sabre 11
44:31 – Midwest Industries
46:03 – Shadow Systems Axio
51:09 – Glock Gen 6
Top 15 New Handguns at SHOT Show 2026
In this video, God Family and Guns explores 15 new handguns from SHOT Show 2026. The video showcases a diverse range of firearms, from classic designs to innovative new models. A personal perspective is offered, comparing different features and price points.
14 New Pistols at SHOT Show 2026
This video covers 14 new handguns, ranging from tiny micro-compacts to full-size duty pistols. This 52-minute video covers all 14 guns, examining their triggers, optics-ready slides, integrated compensators, magazines and other features. Whether you’re into concealed carry, competition shooting, or home defense, this line-up provides a wide range of options. Here are the video time-marks for the 14 pistols:
Timestamp
00:33 — SIG Sauer P365 XMacro Comp
04:02 — Springfield Armory Hellcat Pro OSP
08:00 — Glock 43X MOS Gen 2
12:02 — Smith & Wesson M&P9 M2.0 Carry Comp
16:02 — Walther PDP Pro-E
19:33 — CZ P-10F Optics-Ready 2026
23:21 — FN 509 Tactical Limelight
Timestamp
27:05 — Beretta APX A1 Carry
30:34 — Staccato C2 DPO
33:50 — Canik Rival S Extreme
37:17 — Shadow Systems CR920 Combat
40:58 — Ruger LCR in .32 H&R Magnum
44:22 — Kel-Tec P17 Competition .22 LR
47:52 — Hudson H9A
Steyr ATD Pistol and ATC Comp Pistol
Steyr Arms released some impressive pistols at SHOT Show 2026 — the new ATD and ATC models. The ATD is for general defensive use while the ATC models are designed for rapid-fire competition, so the ATCs boast light triggers and steel frames. The ATC comes in three models: ATC Base, ATC Rock with 5″ Barrel and ported slide, and ATC ROCK with with longer 6″ barrel plus ported slide. STEYR ARMS developed the ATC series to meet the stringent requirements of IPSC, PPC (Police Pistol Combat), and USPC (U.S. Practical Shooting) competition. The new Steyr ATD and ATC pistols are covered in this Firearms Blog TV video, with the ATC Rock models featured in the lead photo for today’s Video Showcase.
Top 7 Concealed Carry Pistols for 2026
This video covers seven pistols suitable for concealed carry. The featured handguns are: Kimber CDS9 Classic; Taurus GX2; Heckler & Koch (HK) CC9; Springfield Armory Echelon 4.0C Comp; Canik Mete MC9 L; SIG Sauer P211-GT4 Carry; and Glock 19 Gen 6. The price range is very significant among these models, starting at $269.99 for the Taurus GX2. And some of the pistols, to be honest, are really bigger and heavier than optimal for everyday carry.
Here’s a smart tip from Bryan Litz, explaining how damage to a bullet jacket can harm the projectile’s Ballistic Coefficient (BC). This tip is posted on Bryan’s new Bryan Litz Ballistics Facebook page. We recommend you subscribe to that page to access Bryan’s latest informative posts.
Bryan notes: “If the case mouth scratches the bullet when you seat it, the damage can cause the BC to be inconsistent, which shows up as vertical dispersion at long range.”
We see this sometimes when running Doppler Radar for competitors at Applied Ballistics Mobile Lab events. If someone is shooting a bullet that typically has a very consistent BC (1% or less) but they’re seeing a higher BC variation, it can be due to the bullets being damaged in the loading process.”
The lead photo above shows the badly-scratched jacket of a bullet seated in a rough-mouthed case. To prevent such jacket damage, one should chamfer, deburr, and smooth case mouths after trimming.
Below is a recorded Doppler radar result showing excessive BC variation. Such variation can increase vertical dispersion at long range. This can result in larger group sizes and lower scores.
Many Remington 700 rifle owners swap out the factory trigger. This is not a difficult task, but you need to follow the proper procedure so you don’t damage any important parts during installation, and so that you don’t interfere with the operation of the bolt and safety. This Do-It-Yourself video from Brownells explains and demonstrates, step by step, how to safely and correctly replace your Remington 700 trigger. This installation video covers the common methods used to install most of the popular after-market Rem 700 triggers. Importantly, the video also shows how to function test after installation, and how to make sure your safety is working properly.
Many Rem 700 owners fit Timney triggers to their rifles.
Video find by ELR Researcher. We welcome reader submissions.
Hornady will host the Zombies in the Heartland 3-Gun Match, May 29-31, 2026, at the Heartland Public Shooting Park in Grand Island, Nebraska. This is one of the nation’s most popular multi-gun reactive targets match. It attracts 400+ competitors each year. For complete event information, visit the official Zombies in the Heartland website or follow the Zombies in the Heartland Facebook page.
With an unusual and challenging course of fire, Zombies in the Heartland attracts shooters from across the country. Shooters will find exciting new reactive targets developed specifically for this match, with most targets breaking, falling over, or moving. Most participants will compete with a pistol, rifle, and shotgun. Alternatively, shooters can compete with a pistol-caliber carbine and shotgun in the PCC Division.
Reserve lodging at Best Western Plus, 2707 S. Locust Road, Grand Island, NE. Call (308) 675-5656 and mention Zombies match for reduced rates.
2025 Zombies in the Heartland 3-Gun Match Highlights
Ten competitive stages mimicking post-apocalyptic situations were featured. Professional and amateur shooters from across the country enjoyed specially developed reactive zombie targets. The Heartland Zombies match is a veritable theme park for shootists, with many fun stages and innovative targets. Many unique, reactive zombie targets have been developed specifically for this match. The use of paper targets has been minimized — so it’s mostly “bang and clang”. Rifles, pistols, and shotguns are used on most stages. There were also fun side-matches. Watch the video above to see this year’s action.
The 2026 Southwest Nationals will be held at the Ben Avery Shooting Facility in Phoenix, Arizona on February 11-15, 2026. We know many of our readers will be traveling by air with their rifles next week to compete at the SW Nationals in Arizona. Here is a helpful article from Team Savage Shooter Stan Pate. This covers how to ship your rifle safely, and then re-establish zero properly when the gun is reassembled after transport. This is one of a series of Shooting Tips articles in the Savage Blog.
Traveling with Firearms — Important Advice
Traveling with firearms can be stressful. You must comply with multiple regulations and then trust your expensive guns to airline baggage handlers. And after arrival you’ll need to put your rifles back together and confirm the zeros. This article offers helpful travel advice from Team Savage shooter Stan Pate. Pate has traveled the globe competing with match rifles. Here he shares his tips for making trips easier on you and your firearms.
Easier Air Travel With Firearms
TSA isn’t nearly as careful with your rifles as you are. Proper storage before sending your firearm up a conveyer belt and into the belly of a plane is critical. Stan Pate spends lots of time each year traveling the skies and has devised a system for keeping his rifle safe when going to and from.
“Never travel with your firearm completely assembled,” Pate cautions. “A fully assembled firearm is much heavier [as a total unit] than one that has been broken-down and stored [in separate sections]. More weight creates more in-the-case movement, which can result in damage. I learned this the hard way years ago. My rifle was actually broken in half when traveling to an international competition. Record your torque settings, use those settings during reassembly and your return to zero should be no problem.”
“Be sure to check on current TSA rules and regulations before travel to be aware of any changes that may effect how you pack your rifles,” says Pate.
Rifle Reassembly and Resetting Zero
The quicker you can reestablish your zero, the quicker you can relax and stop worrying about if your rounds are going to hit their mark during competition. Pate, over the years, has developed a system for rifle reassembly and getting back to zero as quickly as possible. While his torque settings may not be the same as yours, the process can still be used.
“The barreled-action goes back on the stock, and then I tighten all three receiver screws finger tight,” says Pate. “Next, I tighten the front two receiver screws down to 35-inch pounds. The rear receiver screws on this particular rifle likes 15-inch pounds. [Note: Proper torque settings will vary with your action and stock type. Most actions have TWO screws, not three.] Scope attachment comes next, and I follow manufacturer settings when tightening it down. All that’s left to do now is go zero your rifle.”
This video explains an efficient method to Re-Zero your rifles
PMA Tool offers lightweight yet sturdy cleaning cradles that are handy, affordable, and easy to transport. PMA’s popular single-gun cradle, priced at $119.95, is ideal for benchrest and F-Class rigs. It measures about 17″ in length and weighs about one pound. You can choose among 2.25″, 3″, 4″, 5″, and 6″-wide saddles (U-shaped padded supports) to match your forearm width.
PMA also offers an excellent double cradles for $174.95. These twin cradles have 2.5″, 3″, or 4″ saddles, or a combo of 3″ / 2.25″ front saddles. All these cradle types secure your rifle(s) in a muzzle-down position that allows easy cleaning and prevents solvents from running back into the action. The front saddles and all contact surfaces are covered by thick silicone rubber padding which grips the rifle securely yet protects the stock and components from scratches.
These cradles are most commonly sold with a 3″-wide front saddle for Benchrest and F-Open style stocks, or a 2.25″-wide front saddle for rifles with narrower fore-ends such as those found on F-TR, Hunter Class, and varmint stocks. In addition, you can get 4″-wide cradle for the big, long range benchrest rifles.
Double Rifle Cradle is a Smart, Versatile Design
PMA’s double rifle cleaning cradle was was designed from the ground up to work perfectly for two rifles side-by-side. Using the same tie bar and protective saddles found on the single cradel, PMA widened the base and created new uprights to support the saddles, making the cradle as narrow and light as possible, while retaining all the protective and non-slip features from our single unit.
This PMA Tool double cradle unit is available with twin 3″ front saddles, double 2.5″ front saddles or combination 3″ / 2.25″ front saddle configurations to accommodate different classes of benchrest rifles.
However, if you don’t have a printer, don’t want to pay for commercial targets or adhesive target stickers, then there IS an interesting option. One of our Forum members has created his own Custom TARGET STAMP. Using an INK PAD, this creates a black multi-ring bullseye on paper that matches the exact dimensions of a competition target (SEE Top Photo).
Forum member JimmyMac wanted a target that replicates a competition multi-ring bullseye. He wanted to be able to stamp this bullseye quickly and easily on blank paper. Shown below is the custom stamp he created to accomplish that task. JimmyMac posted: “I took dimensions of a 100-yard group target and had a stamp made to transfer to the paper of my choice. Not revolutionary by any stretch, but works good. I may do a UBR score target stamp next.” JimmyMac purchased the target stamper through an online vendor: “I bought mine online. I provided a template. They did the rest. Here is the stamp and the ink that goes inside.” READ FORUM Thread for more information.
Target Stamp Sets on Amazon
There are a large variety of ink-using target stamps available now on Amazon. Some of these are “self-inking” for convenience, while others require a separate ink pad to function. Here are some of the many target stampers currently offered. There are many target pattern and target size options.
This article is Copyright 2026 AccurateShooter.com. Republication by any other website or media violates Federal copyright law and obliges that third party to pay statutory penalties and damages.
Finding Cartridge Length to Lands with OAL Gauge
This 55-minute video covers 18 pistol products displayed at SHOT Show 2026. There is a vast selection of semi-auto handguns plus a couple build kits and revolver frames. All the footage from this video was taken indoors at SHOT Show at the display booths. There is no supplemental video of pistols being shot at a range.
AccurateShooter.com has a page with dozens of 
