Here’s a cleverly-designed convertible F-Class stock that can be used for either F-TR competition (with bipod) or for F-Open shooting (with front sled). Designed by Brian Fox of Fox Fireams UK, this all-new design features a barrel block, allowing a variety of actions to be used. The “Fox Stock” weighs just 5.7 pounds. This allows the F-TR version to easily make weight with competition bipod and a large scope. Our friend Vince Bottomley from the UK offers this report.
Fox F-Class Stock for F-TR and F-Open by Vince Bottomley
Brian Fox’s new stock can be used for either F-TR with bipod (EVO bipod shown in photos) or for F-Open with front bag-rider attached via the full-length accessory rail on the underside. The bag-rider is machined from high-grade plastic and is three inches wide to suit most front rests.
Sierra Bullets recently profiled Mike Walker, Remington engineer and first president of the National Benchrest Shooters Association (NBRSA). In the vintage photo above, Mike is shown with his Remington-actioned benchrest rifle at the 1994 Super Shoot. Mike had reason to smile — at that 1994 event, Walker set a 100-yard small group record with a phenomenal .046″ five-shot group. Mike was truly one of the “founding fathers” of modern benchrest shooting. As Sierra notes: “The field of rifle accuracy and the sport of benchrest shooting would be very different today, were it not for this man.”
Along with Remington Engineer Jim Stekl, Mike Walker helped develop a wildcat that became the 6mmBR cartridge. The original 6mm Benchrest Remington wildcat was a necked-down .308 x 1.5″ Barnes cartridge. That Barnes cartridge was derived from the .308 Winchester case, as shortened to 1.5 inches. The parent .308 Win case has a large primer pocket (though Remington did make a special run of small primer pocket .308 brass). Remington later made factory small primer pocket 6mm BR Rem brass. Compared to the original 6mm BR Remington case, the modern 6mmBR Norma cartridge has very slightly different dimensions, with a small primer pocket and a small 1.5mm (0.059″) flash-hole.
Some folks think you need a new (or nearly-new) barrel to win a benchrest match. That may be true in the centerfire game, but in the world of rimfire benchrest, things are different. Good barrels can remain accurate for a long, long time. That was demonstrated by our friend Joe Friedrich who recently set a new ARA 4-target Aggregate record. Joe was shooting his trusty old “Sweet Pea” rifle with a very well-worn barrel. In fact, Joe’s record-setting Benchmark barrel has logged well over 100,000 rounds. That’s right, a barrel with over 100K rounds shot the best 4-target ARA Agg ever. Will wonders never cease…
In this video, Joe talks about his rifle, the amazing longevity of his Benchmark barrel, and the ELEY ammo he used to shoot two 2500s on the same day (with a 2475 average for four targets):
Here are exclusive “Spy Shots” of a soon-to-be released project, the all-new F-Open chassis system from Competition Machine (Gary Eliseo). Dubbed the “F1″ stock by Gary, this radical new chassis system is designed expressly for F-Open competition. With a super-low Center of Gravity (COG), the F1 boasts many innovative features including an epoxy-lined barrel block that allows the action to float. The F1’s length-of-pull is adjustable for length while the buttpad holder adjusts for height.
The stock, which will work with any type of action, should sell for about the same price as a fully-adjustable fiberglass stock. Competition Machine hopes to start shipping F1 stocks in summer 2015.
The F1 stock will accept any action, long or short, right-hand or left-hand. The F1 is shown below with a Pierce magnum long action.
You can read the latest May 2015 edition of Shooting Sports USA for free. This issue covers the 2015 NRA Intercollegiate Rifle Club Championship and includes an exclusive interview with 2015 NCAA Smallbore Rifle Champion Rachel Martin. If you like classic target rifles, you should definitely read the “Yesterday’s Rifle” article. This recounts America’s program to develop a winning Smallbore Rifle for the 1924 Paris Olympics. The full May 2015 issue of Shooting Sports USA is embedded below.
If you want to read the May issue in a larger, dual-page format, CLICK THIS LINK.
Just like the Olympics, the World Long Range Target Shooting Championships event is held every four years. This year the World Championships take place in the USA, at Camp Perry, Ohio. The USA Young Eagles Rifle Team will be there, competing against six other under-25 rifle teams from other countries. You can help the USA Young Eagles Team by visiting the Young Eagles’ GoFundMe Page and making a secure donation.
The 9th Annual Eastern CMP Games and Creedmoor Cup Matches will be held at Camp Butner, North Carolina, May 1-10, 2015. The Eastern CMP Games run May 1-5, while the Creedmoor Cup Matches take place on May 6-10. All interested shooters are invited to participate in this popular event, which includes: Rimfire Sporter Match, M16 Match, M1 Garand Match, Springfield Match, M1-Carbine Match, Vintage Military Match, Modern Military Match, Vintage Sniper Match, Pistol Matches and more. New for 2015, the CMP will be hold a .22 Rimfire EIC Pistol Match.
The Vintage Sniper Match is a two-person team match, utilizing scoped rifles from the Korean War, World War II or earlier, upon sandbags. Teammates take turns as both shooter and spotter.
Well, it appears that youth and skill CAN triumph over “old age and treachery” — at least in the world of IBS benchrest competition. Here’s a feel-good story that should give us confidence in the upcoming generation of new shooters.
A month ago, Henry Miller won the IBS benchrest match at Dunham’s Bay, New York. Henry shot a .2698 Aggregate to top 21 other shooters. That sounds like a standard headline for most any benchrest event, doesn’t it? In the case, however, it was rather exceptional. You see, Henry, the son of long-time benchrester Scott Miller, is just eleven years old. It was an impressive performance by the young man — conditions for the March 22nd match were difficult. In fact, only two shooters finished under .300 for the 100-yard, five-target average. Scott Miller introduced son Henry recently to the world of benchrest competition. In addition to Dunham’s Bay, young Henry has shot at Pine Tree Rifle Club in Johnstown, New York and at Bell City in Connecticut. By the way, Henry beat the Euber brothers (both Hall of Famers) and other veteran shooters many decades older than he. Well done, young man!
The Deep Creek Range near Missoula, Montana, is one of the best 1000-yard ranges in the country. Many long-range benchrest records have been set in this scenic, tree-lined facility. Now, thanks to Forum member David Gosnell (aka “Zilla”), you can see Deep Creek from the air. David attached a High-Def video camera to a quad-rotor drone. He then flew the drone over the Deep Creek Range, soaring from firing line to the target bay and back again. We think you’ll like this video. It gives you a “birds-eye view” of one of America’s elite ranges. Enjoy.
Commentary by Mark Walker, Sierra Bullets Product Development Manager This story originally appeared in the Sierra Bullets Blog. Visit SierraBullets.com.
Some people love tuners and others hate them. I use them on my rifles and I’ve had more than one person ask me why on earth I would put one of those things on my barrel. I’ve even had a national long range champion tell me to unscrew it and throw it into Lake Erie on my next trip to the pits at Camp Perry. However, there are other shooters that swear by them and have many match wins to back it up.
It’s an indisputable fact that tuners do have an effect on a rifle’s accuracy, however how much is somewhat open for debate. The large heavy target barrels that we use for benchrest or f-class may not be affected as much by a tuner as a lighter weight sporter type barrel. Each barrel that I’ve installed a tuner on not only showed improvement in accuracy but also displayed a wider load window. The increased accuracy is because of the ability to adjust the tuner to the load, however I believe the wider load window is due to the added weight of the tuner slowing down the barrel vibrations. These are both very important aspects of having a very accurate rifle.
While better accuracy and a wider load window are two areas of improvement, I believe the most important feature of a tuner is the ability to adjust the tune during the middle of a match. This is especially important during matches where you must load all your ammo earlier and cannot make adjustments to the load during the match. If you happen to miss the load, instead of having to deal with a gun that isn’t shooting you can make an adjustment to the tuner and hopefully improve the accuracy of the rifle.
While I’ve laid out several ways that a tuner can help, there are also a few ways that tuners can cause problems. They add weight so if you are shooting a discipline that has weight limits on the rifle, you may not be able to install a tuner and still make weight. Sometimes, a barrel just doesn’t show improvement with a tuner installed. These are few and far between, but it is something to consider. If you make an adjustment to the tuner in a match, you need to make sure you move it in the right direction. Adjusting a tuner in the wrong direction can cause very large groups. And finally, if they aren’t tightened properly, tuners can come loose during firing which will cause a lot of problems as well.
As you can see, tuners have both positive and negative aspects. In my personal experience, the positives far outweigh the negatives so I will continue to use them on all of my competitive rifles. If you’ve been thinking about installing a tuner, hopefully some of the information that I’ve presented will help you make an informed decision.
