At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Creedmoor Sports or Grafs.com
— Garmin Xero C1 Pro Radar Chronograph, $599.99
⏺ Superb game-changing compact radar chrono in stock
Looking for a radar chronograph that works great and fits in your pocket? Check out the Garmin Xero C1 Pro Chronograph that features an easy-to-use interface, great performance, and an excellent App for your smartphone. As of 2/4/2024 both Creedmoor Sports and Graf & Sons have the Garmin Xero C1 in stock for $599.99. If they sell out, Midsouth also has the Xero C1 Pro at $599.99.
2. Precision Reloading — Huge Sale on Forster Products
⏺ Save 10% or more on vast selection of Forster items
Now through 2/15/2024, you can get big savings on Forster Products at Precision Reloading. Save 10% or more on dies, case trimmers, primer seaters, neck-turning tools, bushings, and more. CLICK HERE to see all in-stock Forster items on sale now. Sale discounts are good through 2/15/2024.
3. Creedmoor Sports — Sightron SIII LR 10-50x60mm, $1109.99
⏺ Great price on excellent high-mag scope favored by many competitors
The SIII 10-50x60mm LR Target Dot scope is a very good choice for benchrest and F-Class competition. And now you can save $740 off MSRP. With 50 MOA total elevation travel, this scope is good for shooting from 50 to 1000 meters. Sightron’s patented ExacTrack technology provides precise windage and elevation adjustments while maintaining a positive point of contact with the erector tube. This scope is capable of winning major matches even though it is now less than half the price of some other high zoom magnification optics.
4. Brownell’s — S&W 638 or 642 Airweight, $419.99-$459.00 Plus $50 J-Frame REBATE
⏺ Two superb 5-Round lightweight (14.6 oz.) carry revolvers, with $50 Rebate
Smith & Wesson’s J-Frame revolvers are great carry guns. Get big savings now on the ultra-lightweight Model 638 and Model 642 Airweight wheelguns at Brownells. Both the 638 and 642 are under one pound (14.6 oz. empty)! We like the Model 638 because it has a shielded internal hammer. This allows you to shoot single-action during practice. The Model 642 has a fully-enclosed hammer so it is double-action only. The shielded hammer may be better for everyday carry. These Airweight revolvers have light alloy frames with stainless steel barrels and cylinders. Both pistols qualify for a $50 S&W Rebate.
5. Midsouth — Breechlock Press and Ram Swage Kit, $99.99
⏺ Great price on good single-stage press with swage bonus
The Lee Precision Breech Lock Challenger Press is a good starter single-stage press and/or a great secondary press for specialized functions (such as FL-sizing brass). This press can handle demanding brass prep operations, such as sizing cast bullets or swaging crimped primer pockets from mil-spec brass. Currently Midsouth offers the Challenger Press as a combo with the Ram Swage tool for clearing primer pocket crimps.
6. Palmetto SA — Sightmark Wraith Night Vision Scope, $449.99
⏺ Advanced thermal night-vision scope with major discount
Been wanting to try a night vision zoom optic? Consider the Sightmark Wraith 4K Mini Digital Riflescope, now on sale at a huge ($550) discount. This 2-16x32mm unit has cutting-edge digital optic technology. With its impressive 4K (3840×2160) CMOS sensor, the Wraith 4K Mini can detect objects up to 300 yards away even in the darkest of nights, presenting them vividly on a 1280×720 pixel FLCOS screen.
7. Amazon — Frankford Arsenal Tumbler Kit, $69.98
⏺ Good, reliable tumbler complete with media separator
You want your cartridge brass to be clean before resizing and bullet seating. A tumbler can clean large quantities of brass quickly and efficiently. One of the best tumblers for the price is the Frankford Arsenal Quick-N-EZ Vibratory Case Tumbler (#ad). This reliable tumbler holds up to 600 9mm or 350 .223 Rem cases. The included separator fits most buckets, allowing efficient collection of media after tumbling.
8. Amazon — Baofeng UV-5R Ham Radio 2 pack, $35.09
⏺ Double-duty radios receive Ham Radio signals and work as walkie-talkies
Whether planning for a trip or preparing for winter storms, it’s wise to have a back-up emergency communication system. The Baofeng UV-5R Ham Radio 2 pack (#ad) can receive emergency messages even if your phone and cable connections go out. This Ham Radio set provides two complete units that can be placed in separate locations so you can contact family members in a different city. The system can access 128 channels. These units can also be used as shorter-range Walkie-Talkies if needed.
9. Amazon — Caldwell Brass Catcher, $13.99
⏺ Popular and effective, this is a great accessory for AR rifles
Tired of picking up brass or dealing with hot casings? The Caldwell Brass Catcher (#ad) prevents brass from being scattered around your shooting area, while keeping hot brass from landing on you or others. This popular brass collector uses a hook and loop (Velcro-type) attachment to secure to your firearm. A wire frame runs around the bag opening, ensuring brass enters the bag without disruption to bolt cycling.
10. Amazon — Splatterburst Target 50 pack, $35.99
⏺ Good target with hi-viz bright yellow shot displays
Splatter targets make it easy to see your shot locations, even at significant ranges (300 yards and beyond). By contrast, bullet holes on regular paper targets can be hard to see past 200 yards. With these Splatterburst 12″x12″ Targets (#ad) you can instantly see your shots upon impact and spend less time checking your target. These targets feature five diamonds in a high-viz grid pattern for precise aiming. Chose a 10-pack for $12.99, a 25-pack for $22.99, or a 50-pack for $35.99.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Our take on Bore-Store Gun sleeves is simple: They work great, so buy them and use them — for ALL your valuable firearms.
Winter’s here, with rain and snow in much of the country. We known readers will have their guns in the safe for long periods. For winter storage, we recommend Bore-Stores. These thick, synthetic-fleece sacks cushion your guns, preventing nicks and scratches. The breathable fabric wicks away moisture, and the fibers are coating with corrosion inhibitors. I personally use Bore-Stores for in-safe storage with all my guns, and I have never had one of my guns rust inside a Bore-Store, even when I lived a stone’s throw from the ocean and its salty air.
Bore-Stores are offered in a range of sizes to fit everything from a snub-nosed revolver to a 33″-barrelled Black Powder Rifle. Bore-Stores can be purchased for $9.99 – $28.99 from Borestores.com. For most scoped rifles, we recommend the 10″x46″ SCR-1 case ($25.99). The Bore-Store manufacturer, Big Spring Enterprises will also craft custom sizes on request. For a long-barreled F-Class or ELR rig you may need a custom length. Or you can remove the scope and use the 7″x60″ MUS-1 Musket Bore-Store ($28.99).
Triple-Layer Sealed Bags — Affordable and Effective
Consider Military-Style, Triple-Layer Bags for Long-Term Storage
While we prefer Bore-Stores for regularly-used guns, if you have heirloom firearms that will be kept in storage for very long periods without seeing any use, you may want to grease them up and place them in the thin, but rugged three-layer storage bags sold by Brownells. The bags are made from a three-layer laminate of polyester, aluminum, and polyethylene film, with a shiny silver exterior. Though the laminate is thin, the Brownells storage bags are puncture-resistant, and have a 0% moisture transmission rating so moisture can’t get inside. These bags are also resistant to petroleum-based chemicals and they won’t break down even in contact with soil or moisture.
Here’s one VITAL bit of advice for using these bags. Be absolutely sure, before you seal up the bags, that your guns are DRY and that all metal surfaces have been coated with an effective anti-corrosive, such as BoeShield T9 or Eezox. Brownells’ storage bags are inexpensive. A three-pack of 12″x 60″ rifle sacks (item 083-055-003WB) costs $20.99 — seven bucks a gun. That’s certainly cheap insurance for rifles and shotguns that may cost many thousands of dollars.
Get Your Guns Out of Foam-lined Cases — They Are Rust Magnets
Just about the worst thing you can do for long-term storage (short of leaving your rifle outside in the rain) is to store firearms in tight, foam-padded cases. The foam in these cases actually collects and retains moisture from the air, acting as the perfect breeding ground for rust. Even in warm summer months, humid air can leave moisture in the foam.
Remember, those plastic-shelled cases with foam interiors are for transport, not for long-term storage. Don’t repeat the mistake of a wealthy gun collector I know. He stored four valuable Colt Single Action Army (SAA) revolvers in individual foam-padded cases, and locked these away in his gun safe. A year later, every one of his precious SAAs had rusted, some badly.
The Southwest Nationals (SWN) is right around the corner. Hosted by the Desert Sharpshooters Rifle Club at the Ben Avery Shooting Facility outside Phoenix, the 2024 SWN takes place February 14-18, 2024. One of the major F-Class matches of the year, the SWN will feature top F-Open and F-TR rifles. And many of those F-Open rigs will be running McMillan stocks. Today’s Sunday GunDay story is about the most sophisticated F-Open stock in McMillan’s line-up, the Kestros ZR.
Kestros ZR Stock — Impressive Design for Competition
Review by F-Class John
Walk the line at just about any rifle competition and you’ll see your share of McMillan stocks. Known for crafting high-quality fiberglass/composite stocks, McMillan has long been at top choice for competitive shooters, hunters, and tactical marksmen. McMillan’s latest top-of-the-line F-Open stock is the impressive Kestros ZR which features an extended front bag-riding Z-Rail. McMillan notes that the ZR’s “extended rail system, which extends the fore-end of the stock, provides all the benefits of the rails on the Kestros R stock while also lowering the center of gravity.” In addition, “the bottom of the buttstock is perfectly parallel to the rail with a 5/8″ flat for improved performance in a rear sandbag.”
The Kestros line features several models, but the ZR represents the pinnacle of craftmanship. Each one is finished off by a single craftsman and takes roughly four times longer to create than any other Kestros. So when McMillan offered me a chance to test one out, I jumped at the opportunity.
The aluminum Z-Rail extends nicely from the front of the stock and has a nice contrast of metal against the matte finish of the stock. I inspected the rails and noticed that they are very cleanly machined — all the corners and rails were precise and sharp. As a result, I grabbed some 1000-grit sandpaper and just lightly knocked the edges and corners down just to keep from accidentally scratching myself or my gear.
When I was ordering the ZR, lead time was about 6-9 months. I was like a kid on Christmas when mine arrived after seven months. Holding a Kestros ZR is definitely a unique experience compared to a traditional wood stock and you can’t help but feel like you’re holding something special. I chose three shades of blue that transitioned dark from the butt stock to lighter on the fore-end in a spectacular flame pattern. With McMillan, there are thousands of possible color and pattern combinations. These color/pattern options are outlined on McMillan’s Gallery Page.
The Kestros ZR comes fully inletted with pillars. I was able to bolt my Defiance action right into the stock “as is” without a bedding job. (McMillan states bedding is not required, though this is certainly something most Kestros owners will do). I threw in my action, fit a couple action screws and tightened it all down. I was amazed at how nicely it all fit together with even the little details like the port cutout being perfectly smooth with my action port. I loaded up some .284 Win rounds and headed to the range to test the new stock at 100 yards.
Here are examples of targets shot with the Kestros ZR at 100 yards.
During initial range testing (see above) I shot nine groups for vertical and all of them were under 0.40″ with the smallest being .08″ of vertical. I topped off the testing by shooting a 200-11X the next week at my club match. The thing that really stood out was how smoothly the stock tracked with its lower center of gravity while shooting free recoil and ultimately this translated to success on target.
Low-Rider — You may find that because of how low the Kestros rides as well as its additional length due to the Z rail, you may require an extension for your front rest.
CONCLUSION — Great Modern Low-Profile F-Class Stock
Overall the Kestros ZR exceeded my expectations. After a small learning curve, it was a joy to shoot and it performed great. As someone who believes in the power of muscle memory, I found each time I transitioned between the Kestros and my traditional wood stocks there was a slight adjustment period but not enough to impair accuracy in any way. Something to consider is that because every Kestros is made to the same dimensions, it makes owning multiples an easy process of switching between guns without any need for readjustment.
For those willing to put in the practice, your patience will be rewarded, and I think most shooters will find the Kestros ZR could become their new favorite stock. If you’re in the market for a new F-Open stock, the Kestros ZR is definitely one to consider.
McMillan Kestros — Proven National Championship-Winning Stock
Norm Harrold (above) won the 2018 USA F-Open National Championship shooting a .284 Shehane. Norm’s F-Open rig features a McMillan Kestros ZR stock and Bartlein barrel chambered for the .284 Shehane, which has a bit more case capacity than a standard .284 Winchester. Norm loaded Berger 184gr 7mm bullets in Lapua brass. Norm revealed his load in an Erik Cortina YouTube Video.
Tips for Ordering a Kestros ZR
You can order a Kestros ZR and other Kestros stock models via McMillan’s Competition Stocks Page. While there are a number of options available, McMillan has a helpful guide that walks you through each one to ensure you get exactly what you need. F-Class John notes: “While filling out my form I realized that because I have a custom-designed action, I needed some help, so I gave McMillan a call. The staffers were incredibly helpful and their knowledge of all the major actions out there made answering my questions a snap. I liked the fact that there is no set, fixed price on any of the stocks. The pricing system allows customers to get just what they want (within limits) and not have to pay for anything they do not want or need.”
Want to see new-born Pandas? No, not the furry kind — rather Stolle Panda actions produced with state-of-the-art CNC machinery. If you’ve ever wondered how precision benchrest, long-range, and tactical rifles are built, check out video from Kelbly’s. You’ll see actions finished, barrels chambered and crowned, pillars installed in stocks, barreled actions bedded, plus a host of other services performed by Kelbly’s gunsmiths and machinists.
If you’re a fan of fine machine-work, this video should be both informative and entertaining. You can see how precision gun work is done with 21st-Century technology. Tip of the hat to Ian Kelbly and crew for producing this excellent video visit to the Kelbly’s production center.
Click Volume Control to Activate Sound for Kelbly’s Video:
After the hugely successful release of the compact Garmin Xero C1 Pro chronograph, two competitors are now playing “catch-up” with all-new compact radar chronographs. LabRadar has an impressive new unit, the LX Compact, while Caldwell introduced its midsized VelociRadar which employs innovative Chirp Radar technology. For today’s Saturday Video Showcase, we feature recent video reviews of these three notable Compact Radar Chronographs.
Caldwell VelociRadar
Caldwell showcased its all-new VelociRadar chronograph at SHOT Show 2024. This is quite a bit bigger than the Garmin Xero C1 Pro or the new LabRadar LX compact. But it is still relatively small compared to the original orange LabRadar unit.
Notably, the Caldwell VelociRadar uses a different mode of radar (Chirp Radar vs. Doppler) than other chronos, which offers some advantages. Caldwell states: “The Caldwell VelociRadar Chronograph is precision redefined with cutting-edge Chirp radar technology. This is no standard chronograph, while most chronographs stop at only providing muzzle velocity the VelociRadar tracks bullets downrange offering the full picture of ballistic performance. Using these downrange velocity measurements, the VelociRadar calculates true muzzle velocity, the bullet’s ballistic coefficient, and downrange energy.” Note that point about BCs — Caldwell says this new machine will let you calculate the true Ballistic Coefficients of your bullets as fired from your rifle.
LabRadar LX Compact
LabRadar announced its new LabRadar LX compact Doppler radar chronograph at the 2024 SHOT Show. This is a truly compact unit, measuring just 2.5″ X 2.75″ X 2.75″. The LabRadar LX comes with a tough metal case, lifetime battery, and ships with a tripod. The unit has a velocity range of 65 to 5000 FPS and it can display Average, ES, SD, Min, and Max Velocity.
Observers at SHOT Show noted the LabRadar LX has a very bright, high-contrast LCD Screen for outdoor viewing. Overall, the exterior design and specs are impressive. Definitely watch both videos to understand the difference in features between the Garmin and this ultra-compact new LabRadar LX. If you’re shopping for a compact chrono it’s worth looking at all the options. The Garmin Xero C1 Pro is currently $599.99, while the new Labradar LX is $599.95.
Garmin Xero C1 Pro Chronograph
The Garmin Xero® C1 Pro chronograph has already been a big success. After great initial test reports, this compact $599.99 chronograph has been selling out at vendors nationwide. With the performance and quality of the Xero C1 Pro, many LabRadar owners are putting their older orange radar chronos up for sale. Check out the features of this new compact radar chrono in this official product launch video from Garmin:
Introduced in late 2023, the Xero C1 Pro radar chronograph has been an instant hit. Measuring just 3.03″ x 2.38″ x 1.36″, the Xero C1 Pro is compact and easy to transport. Using Doppler radar, the Xero C1 Pro accurately records projectile velocities from 100 fps to 5,000 fps, so it works with all kinds of projectiles. Setup is simple and intuitive, thanks to the button-operated design. SEE FULL RecoilWeb Review.
Garmin offers a modern ShotView™ smartphone app and lets you compare velocities for all shots fired, track ES/SD, and record total sessions. The rugged Xero C1 Pro chrono has a IPX7 water-resistant rating and boasts up to 6 hours of battery life. The unit ships with a compact tripod mount, and the screen is described as “sunlight-visible, transflective, monochrome” so it is easy to view in all conditions.
Above is a recent video review from our friends at Area 419. This review confirms that the Garmin is very reliable, extremely easy to set-up, and the provided Smartphone App works great. User reports have been very positive, and our testers note that the Garmin works better on air rifles than the original LabRadar.
Here’s an inexpensive procedure that can help you load straighter ammo, with slightly better measured concentricity (i.e. less run-out) on the case necks and bullets. Simply use a Rubber O-Ring on the underside of the die locking ring. This allows the die to self-align itself (slightly) to the case that is being sized. Without the O-Ring, if the flat surface on the top of your press is not perfectly square with the thread axis, your die can end up slightly off-angle. This happens when the bottom of the locking ring butts up tight against the top of the press. The O-Ring allows the die to float slightly, and that may, in turn, reduce the amount of run-out induced during case sizing.
Top prone shooter GSArizona, who sadly passed last year, tried this trick and said it works: “Go to your local hardware store and get a #17 O-Ring (that’s the designation at Ace Hardware, don’t know if its universal). Slip the O-Ring on the die and re-adjust the lock ring so that the O-Ring is slightly compressed when the die is at the correct height. Size and measure a few more cases. You will probably see a slight improvement in neck concentricity as the die can now float a bit as the case enters and leaves it. This isn’t going to be a dramatic improvement, but it’s a positive one.”
We want to stress that adding O-Rings to sizing dies may help some reloaders, but we don’t offer this as a panacea. Try it — if using the O-Ring reduces measured runout that’s great. If it doesn’t, you’ve only spent a few pennies to experiment.
Lee Precision makes die lock rings with built-in O-Rings. Lee’s distinctive lock ring design allows the same kind of self-alignment, which is good. However, Lee lock rings don’t clamp in place on the die threads, so they can move when you insert or remove the dies — and that can throw off your die setting slightly. By using an O-Ring under a conventional die lock ring (that can be locked in place), you get the advantages of the Lee design, without the risk of the lock ring moving.
Do you own an older RCBS electronic powder dispenser? If you do, take the time to watch this ChargeMaster Tuning video from 8541 Tactical. This nine-minute video demonstrates how to re-program your older ChargeMaster to “tune” the dispensing process. The video shows the exact programming procedures to follow, step-by-step. Some folks want a faster powder flow — others tune their machines for a more reliable drop (with fewer over-runs). One cheap and popular modification is to insert a 1″-long section of a McDonald’s plastic straw in the ChargeMaster’s silver dispensing tube. This works surprisingly well to smooth kernel drop and prevent “clumping” that can cause an over-charge. The McDonald’s straw MOD is demonstrated in this video, starting at the 6:22 mark.
Large-Diameter Dispensing Tube Mod
Many folks have had success with the McDonald’s straw modification demonstrated in the above video. However, some folks would like to get even better flow performance (with virtually no clumping). Forum Member Frank B. has come up with a new option using a brass hose fitting with a large outside diameter. The hose fitting (with tape wrapped around the barbed nose section) is placed inside the RCBS dispensing tube (have some kind of wrap — you don’t want metal-on-metal). Here’s how the unit looks installed:
Frank tells us: “I have found a cure for the over-throw problem. It is a simple 1/4″ barbed hose nipple. I wrapped a couple layers of tape around the barbed end for a snug fit. With this in place, I have thrown 100+ charges of Varget without a single overthrow. The ID of the barbed end needs to be approximately 3/16″ to feed a steady flow. This works because of the larger ID at the drop.”
Frank adds: “You can see in the photo that the powder is not stacking up. You can watch it drop one grain at a time. Hope this will take the aggravation out of your case charging.” For best performance with this brass fitting MOD, we recommend de-burring and smoothing out the front edge of the brass fitting over which the kernels drop.
Brass fitting mod suggested by Boyd Allen. We welcome reader submissions.
There are many products used successfully for case lubrication for case sizing. And for neck-turning a variety of lubricants are favored. The video above explains the basics of case lubrication with die wax, and spray lubricants. Below we mention three products that have proven very effective. For cases that have a close fit to your chamber via custom FL dies, Ballistol works well and is easy to apply and remove. For neck-turning, some of our Forum members have had great success with some automotive lubricants.
Three Good Lubricants You May Not Have Tried Before If you’re using a body die or a full-length sizing die, try using Ballistol (in the aerosol can) as a lube. It works GREAT without the tacky or gooey residue left by most case lubes. It will also clean off carbon residues on the neck as you lube the case. Just spray a little on a cotton patch (or your fingertips) and wipe each case before you run it up into the die. If you are using a steel neck bushing, be sure to wipe the neck as well. You can usually do a half-dozen BR-sized cases before you need to re-apply Ballistol on the patch. Ballistol is non-toxic, bio-degradeable, and will not harm your skin. It is very slippery, but can easily be removed with a rag or paper towel. Try it–you may retire your One-Shot. Ballistol can also be used to protect wood stocks.
Note, for heavy case-forming or necking up case necks, we still recommend a thicker lubricant, such as Imperial Die Wax. But for normal case sizing, after your neck has been expanded, Ballistol will do the job, and you won’t need to tumble the brass afterwards. All you need is a very thin layer of Ballistol, and this easily wipes off with a paper towel.
For Neck-Turning, Try STP Blend or Assembly Lube
For lubing the neck-turning tool mandrel while turning case necks, many folks use a blend of STP® Oil Treatment and Mobil 1 lube. Chuckw2 reports: “Try STP and Mobile 1 Synthetic oil in a 50/50 mixture. Very slick, you will need to tumble your cases after turning.” STP is a very thick lubricant, that flows and clings almost like honey. Jason reports the STP blend comes off easily in an ultra-sound bath, using a bit of detergent. At many retailers, STP is also available in a convenient 7-ounce tube, so you don’t have to buy a large bottle.
Another even cheaper option is assembly lubricant. For turning his case necks, RStreich uses assembly lube from an auto parts store. He notes: “The brand I have is reddish in color and kind of sticky like honey. It’s far better than the Imperial die wax I was using before.” There are a variety of types, both with and without moly additive, and you can select the viscosity you prefer if you sample a few brands. Be sure to clean out any lube residue from the inside of your necks when you have completed your neck-turning.
AR-platform rifles are fun and versatile, but the standard, mil-spec triggers leave much to be desired. They tend to be gritty, with creep and heavy pull weight. One of the easiest, most effective AR upgrades is a trigger group swap. An improved fire control group makes a huge difference. There are many aftermarket trigger options for the AR platform rifles. Choose single-stage or two-stage, either standard trigger assembly or unitized “drop-in” trigger, such as those made by Timney or Triggertech.
When upgraded with a precision trigger and match barrel, AR-platform rigs work great in NRA High Power competitions (Photo from NRA Blog, at Camp Perry).
Two-Stage vs. Single-Stage Triggers
Two-stage triggers have two separate movements. The first stage offers a light, spring-loaded pressure that works against the shooter’s pull until stopping at the second stage – this is called “take-up”. If there is no spring pressure, it is known as “slack”. Should the shooter continue to pull the trigger once he’s arrived at the second stage, the mechanism will operate like a single-stage trigger from there until engaging the sear and firing the gun. Some shooters prefer a two-stage trigger because it allows a mental preparation (first stage) before the final decision to “break the shot”.
Single-stage triggers feature no take-up or slack, as they begin engaging the sear as soon as the shooter begins pulling the trigger. Some competitive shooters prefer the two-stage trigger because of the feedback it provides during its first stage, while other shooters, including those using their rifle in tactical scenarios, may want the surety of a single-stage trigger, ready to engage and fire once their finger is inside the trigger guard. Regardless of preference, a good trigger will feature minimal creep and should be free of grittiness, providing a smooth, even break.
Drop-In Trigger Assembly vs. Standard Trigger Group
Once you decide between a single-stage or two-stage trigger, you can choose between standard and drop-in trigger groups. Standard trigger groups feature all the fire control group parts separated, and need to be pieced together and installed much like a mil-spec trigger, while drop-in trigger are pre-assembled and contained within a casing that simply drops in to the receiver and accepts the pins, hence the name.
After-Market Trigger Comparison
Some shooters prefer drop-in triggers due to the ease of installation, while others opt for standard groups so they can access the components individually for cleaning adjustment or replacement. If one piece of a drop-in trigger fails, you’ll need to either replace the entire unit or send it to the manufacturer for repair, whereas you may be able to simply replace the broken component of a standard trigger without needing a whole new trigger set.
Trigger Terminology — “Creep”, “Stacking”, “Overtravel”
“Creep” or “travel” is the distance the trigger moves between the end of take-up and when the trigger breaks to fire the fun. Too much creep can affect accuracy, but no creep can be unsafe, as the shooter may not be prepared to fire. “Stacking” occurs when the trigger weight actually increases during travel — this shouldn’t happen. Lastly, “overtravel” is the distance the trigger continues moving back after the gun fires.
This article is based on a longer story in the NRA Blog.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Sportsman’s WH — Savage 64 Precision Rimfire Rifle, $259.99
⏺ Great deal on good starter rifle for NRL22
Here’s a bargain-priced .22 LR rifle in a modern chassis. The semi-auto Savage 64 Precision boasts a nice chassis with M-LOK slots and ergonomic pistol grip. The heavy barrel has a threaded muzzle for easy attachment of brake or suppressor. The testers in the video said this rifle was a “fantastic trainer gun” — very reliable AND very accurate. That makes this a great starting rifle for NRL22, plus the semi-auto action allows fast follow-up shots. Get this rifle on sale now for $259.99 at Sportsman’s Warehouse.
⏺ Nice small press and LOTs of tools — great price
For people getting started in hand-loading, it’s wise to start with a kit that has most of the tools you need. The very affordable RCBS Partner Press Reloading Kit comes with Press, Powder Scale, Powder Funnel, Loading Block, Lube Tray, Neck Brushes, Dubur Tool, Load Manual and more. These Partner Presses work well for loading at the range, or use the compact Partner as a second press for depriming or bullet seating.
3. EuroOptic — 15% Off Vortex Optics
⏺ Significant savings on full line of Vortex optics
Vortex scopes are a top choice of hunters and target shooters alike. Vortex offers a superb warranty and a wide variety of optics types and zoom levels. If you’ve wanted to grab a new Vortex riflescope or spotting scope visit EuroOptic. Right now you can get 15% off the vast majority of Vortex products EuroOptic has in stock. Use CODE VTX15 to get the 15% savings.
4. CDNN Sports — HK 416 .22 LR Rimfire, $399.99
⏺ Great option for AR cross-training or rimfire gun games, save $200
If you own an AR for Service Rifle competition or 3-Gun matches, here’s a great option for inexpensive rimfire cross-training. An AR-type .22 LR rifle can also be effective in NRL22 matches. Right now you can save $134 on the HK 416 .22 LR rifle plus you get a $50 card for HK webshop products. This rifle boasts a 16.1″ barrel, retractable stock, M-LOK rail, and adjustable flip-up sights. With authentic AR dimensions and ergonomics, this is a great cross-trainer.
5. Firearms Depot — Aguila .22 LR Ammo 2000 Rds, $109.38
⏺ Amazingly low price for .22 LR Ammo for plinking and training
How’d you like decent .22 LR ammo for just 5.5 cents ($0.055) per round? This is one of the best deals we’ve seen in years. You could shoot a 100-round NRL22 match for just $5.50 in ammo cost. Heck you could pay that much for just nine major brand 6.5mm bullets (at $59.99/100 they’re 60 cents each). Act soon to get these spectacular savings.
6. MidwayUSA — Walker’s Quad Connect 26 dB NRR Bluetooth Electronic Muffs, $44.79
⏺ Comfortable with excellent 26 dB NRR plus Bluetooth connectivity
These Walker Ultimate Electronic Quad muffs have an exceptionally high 26dB noise reduction rating (NRR). Some other electronic muffs are rated at just 20 or 21 dB NRR, a huge difference. These are equipped with Bluetooth so you can receive calls and audio from your smartphone. These muffs boast FOUR Omni Directional Microphones, twin volume controls, adjustable frequency tuning, integrated voice mic, and really fast reaction time. If you want something thinner, the Walker’s NRR 23 Slim Muffs are also on sale, for just $39.99, 33% Off.
7. Amazon — Tipton Best Gun Vise, $79.59
⏺ Versatile, stable, works with all rifles, including ARs
When cleaning long guns, you need a secure, stable platform. We recommend the Tipton Best Gun Vise, now $79.59 on Amazon (#ad). This vise was designed to accommodate the widest possible array of firearms for cleaning, maintenance, or gunsmithing. This vise is easily configurable to handle bolt-action rifles, break-open shotguns, AR-15s, and handguns.
8. MidwayUSA — Wheeler AR Magwell Support Block, $19.99
⏺ Great AR holder — use with Gun Vise or bench-mounted
Here’s a cool tool for AR owners, now just $19.99 on sale. The Wheeler Delta series mag well vise block holds standard AR15 lowers with your Tipton Best Gun Vise, or can work directly mounted to a bench. The vise block has 180 degrees of rotation. There is a built-in hammer stop to protect your lower while testing triggers. NOTE: This block is designed for general maintenance only. It will NOT work for removing or installing barrels, handguards, or other accessories that require large amounts of torque.
9. Amazon — Scope Turret Magnifying Glass with Level, $12.99
Making rapid, yet precise scope turret adjustments can be challenging, especially during fast, timed stages. Most scope turrets have small, thin markings that can be tough to see (particularly with older eyes). To see your elevation turret markings better, try the Monstrum Scope Turret Magnifying Glass with Level (#ad). This simple but effective tool places a magnifier on the shooter’s side of the turret allowing easy viewing. In addition, this handy unit includes a built-in bubble level to help the shooter avoid canting his rifle.
10. Amazon — MTM R-100 Ammo Box, $17.99
⏺ Best 100-rd ammo box, securely holds cartridges nose up or nose down
For transporting ammo to the range, we like the MTM R-100 Deluxe ammo box (#ad). These durable R-100 flip-top ammo boxes provide excellent protection for your ammo. When rounds are in the nose-down position special fingers in each hole prevent bullets from hitting the bottom of the box, thereby preventing tip damage. You can also pick up a semi-transparent blue version for $17.99 at MidwayUSA. We like being able to see the cartridges inside the box.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Here’s one VITAL bit of advice for using these bags. Be absolutely sure, before you seal up the bags, that your guns are DRY and that all metal surfaces have been coated with an effective anti-corrosive, such as BoeShield T9 or Eezox. Brownells’ storage bags are inexpensive. A 
Remember, those plastic-shelled cases with foam interiors are for transport, not for long-term storage. Don’t repeat the mistake of a wealthy gun collector I know. He stored four valuable Colt Single Action Army (SAA) revolvers in individual foam-padded cases, and locked these away in his gun safe. A year later, every one of his precious SAAs had rusted, some badly.
If you’re using a body die or a full-length sizing die, try using Ballistol (in the aerosol can) as a lube. It works GREAT without the tacky or gooey residue left by most case lubes. It will also clean off carbon residues on the neck as you lube the case. Just spray a little on a cotton patch (or your fingertips) and wipe each case before you run it up into the die. If you are using a steel neck bushing, be sure to wipe the neck as well. You can usually do a half-dozen BR-sized cases before you need to re-apply Ballistol on the patch. Ballistol is non-toxic, bio-degradeable, and will not harm your skin. It is very slippery, but can easily be removed with a rag or paper towel. Try it–you may retire your One-Shot. Ballistol can also be used to protect wood stocks.
For Neck-Turning, Try STP Blend or Assembly Lube
Another even cheaper option is assembly lubricant. For turning his case necks, RStreich uses assembly lube from an auto parts store. He notes: “The brand I have is reddish in color and kind of sticky like honey. It’s far better than the Imperial die wax I was using before.” There are a variety of types, both with and without moly additive, and you can select the viscosity you prefer if you sample a few brands. Be sure to clean out any lube residue from the inside of your necks when you have completed your neck-turning.
